Help for a telyt 200

[zaln]

Advertisement (gone after registration)

I just receive a nice Telyt 200/4 but I have some problem with it.

 

Telyt + Viso III + OUBIO not problem ; it focus at infinity.

 

But haw can I attach the Telyt at the bellow II? II have the 16598 adapter ring ( really the 16598J) but is not good for connect the full telyt ad the bellow .

 

I read that for attach the telyt at the bellow II I must use the “optical group” but I’m not able to separate the “optical group” from the focus “elicoide”. I can separate only the first part of the “optical group” at the diaphragm point (but this is only half of the optical goup)

 

In any way also with this partial “optical group “ I can not use the adapter 16598 (j).

 

Some help please

 

Giorgio

[mhoersch]

High Giorgio,

 

you need to remove only the OUBIO and then screw the whole lens into an dapter 16590 which screws into the bellows. If you look in eBay there should be one or two adapters for sale right now. Just look for "Leica 16590".

[Advertisement]

The Leica Q3 is available for pre-order at B&H Photo Video and Adorama

[tobey bilek]

Unscrew the optics and it may be hard afer 40 years. 280, 120, 135 some 90`s are all the same

[zaln]

Very good suggestion . I will look for the 1590 adapter . It sound very logical. I was so involve on the idea of to use the “optical group” that I do not look for the most logical solution.

 

Thanks a lot.

 

Giorgio