Jump to content

Best digital camera for Leica r lenses


Joecamera

Recommended Posts

Advertisement (gone after registration)

Not certain on an R solution, but I just purchased a second DMR to cover myself in case the first fails at some point. It was not cheap at $3,850.00 but it had never been used until I mounted it on my other R9 on Tuesday. If Leica indeed announces an R solution, it is full frame and it is compatible with all of my current R Lenses, I may jump and get one. To be honest, and even with the 1.38 Crop factor, the R9 gives me amazing detail.

Link to post
Share on other sites

  • 2 weeks later...
  • Replies 132
  • Created
  • Last Reply

Mount on a Canon full frame with Novoflex adapeter. Katz Eye sells a canon 7D split image screen.

 

Understand you loose diaphragm automation. If that is not acceptable, DMR is best and you end up with the equavalent of 50,75, 135, 240 mm lenses.

I question the repairability of DMR in the future. Lot of money to invest without knowing the future.

Link to post
Share on other sites

  • 11 months later...

To those using the Leitax solution for Nikon D700 or Nikon what-have-you: even with a chipped lens, is stop-down focusing necessary? I thought the focusing/metering systems work the same, minus only the actual twisting of the barrel. Do I have this wrong?

Link to post
Share on other sites

You still have to focus the lenses - all Leica R lenses are manual focus.

 

You also have to stop down the aperture manually - something which I have never found to be a problem.

 

Nikons do not suffer from the metering problems that some Canons do.

 

The chip that can be added to the Leitax mount merely passes on the lens details to the body. It doesn't add any functionality beyond that.

Link to post
Share on other sites

You still have to focus the lenses - all Leica R lenses are manual focus.

 

You also have to stop down the aperture manually - something which I have never found to be a problem.

 

Nikons do not suffer from the metering problems that some Canons do.

 

The chip that can be added to the Leitax mount merely passes on the lens details to the body. It doesn't add any functionality beyond that.

 

What I meant is, do you have to focus the lens while it's wide open, receive focus confirmation, and then stop the lens down to your chosen aperture before taking the picture? Or can you set your aperture, focus the lens, and then take the picture (as you would with a rangefinder)?

Link to post
Share on other sites

Ted -

 

The brighter the viewfinder, the easier it is to focus. With stop down metering the aperture closes down, and the view through the viewfinder is darker than it would be with the aperture fully open. Consequently, focusing is more difficult.

Link to post
Share on other sites

...Or can you set your aperture, focus the lens, and then take the picture...

Yes you can do this but only from full ap. to f/4 or f/5.6 roughly, otherwise the viewfinder is too dark and some cameras don't meter properly.

Link to post
Share on other sites

Unless you use Live View where the camera compensates during stopped down metering and presents a bright image on the LCD (although with a little noise depending on how far you stop down)...

Ah yes i have no live view myself. Does it help focusing at f/5.6 or f/8 for instance?

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...