IkarusJohn Posted April 14, 2024 Share #101 Posted April 14, 2024 Advertisement (gone after registration) 13 minutes ago, lct said: but the others can only confirm that their gear works normally We know nothing about how the poster uses the camera. No better informed. Link to post Share on other sites More sharing options...
Advertisement Posted April 14, 2024 Posted April 14, 2024 Hi IkarusJohn, Take a look here How widespread is the ‘FREEZE’ problem!?. I'm sure you'll find what you were looking for!
lct Posted April 14, 2024 Share #102 Posted April 14, 2024 (edited) • Edited April 14, 2024 by lct Link to post Share on other sites More sharing options...
ianforber Posted April 19, 2024 Share #103 Posted April 19, 2024 On 4/14/2024 at 7:52 PM, scott kirkpatrick said: I agree that this is a strange-sounding problem, but there are people who see freezes. So asking them how they use the camera (particularly with respect to powering on and shooting quickly or shooting rapid single shots, which seem to be connected to freezes) is relevant. I would only ask those who don't see freezes if they leave the camera on all day, letting it manage its powering down and back up. That’s how I use mine when out shooting. Just switch it on let it sort itself out. However, I might sometimes (not always) gently press the shutter button while it’s slung over my shoulder to make sure it’s on and definitely ready for when I want to use it. 1 Link to post Share on other sites More sharing options...
Yarosuav Posted April 21, 2024 Share #104 Posted April 21, 2024 I've had a silver M11 since it came out, never had any freeze issues. I also just got a black M11-P about a month ago, and so far it's been flawless as well. Link to post Share on other sites More sharing options...
Derbyshire Man Posted April 22, 2024 Share #105 Posted April 22, 2024 A related question. Mine has started doing the occasional over exposed shot randomly. Anyone know what the alleged precipitant is for this behaviour? Link to post Share on other sites More sharing options...
Knorp Posted April 22, 2024 Share #106 Posted April 22, 2024 32 minutes ago, Derbyshire Man said: A related question. Mine has started doing the occasional over exposed shot randomly. Anyone know what the alleged precipitant is for this behaviour? Spot exposure metering ... Link to post Share on other sites More sharing options...
elmars Posted April 22, 2024 Share #107 Posted April 22, 2024 Advertisement (gone after registration) vor 54 Minuten schrieb Derbyshire Man: A related question. Mine has started doing the occasional over exposed shot randomly. Anyone know what the alleged precipitant is for this behaviour? It is a bug that randomly happens. It is described a few times here. Leica never fixed it. 1 Link to post Share on other sites More sharing options...
Derbyshire Man Posted April 22, 2024 Share #108 Posted April 22, 2024 It didn't happen at all on mine and suddenly about 5 or 6 times over the last 10 (non consecutive) days of shooting. Odd! Link to post Share on other sites More sharing options...
scott kirkpatrick Posted April 23, 2024 Share #109 Posted April 23, 2024 (edited) Curious. I sometimes get an underexposed image but almost never overexposed. I tend to leave the camera on center-weighted. Since the thread title is "freezes," I'll add that I finally had an M11-P freeze today, but that was with an older firmware. The rest of the day went fine. Edited April 23, 2024 by scott kirkpatrick Link to post Share on other sites More sharing options...
fotografr Posted April 23, 2024 Share #110 Posted April 23, 2024 2 hours ago, scott kirkpatrick said: Curious. I sometimes get an underexposed image but almost never overexposed. I tend to leave the camera on center-weighted. Since the thread title is "freezes," I'll add that I finally had an M11-P freeze today, but that was with an older firmware. The rest of the day went fine. I've read several posts here which indicate the freeze problem has gotten even worse with the latest firmware update. Link to post Share on other sites More sharing options...
graphlex Posted April 23, 2024 Share #111 Posted April 23, 2024 On 4/7/2024 at 6:01 PM, IkarusJohn said: With my M9, Monochrom & M10-D, if the lens isn’t coded, the camera simply applies the last manually selected code (great if you use only one uncoded lens). How do you manually select a lens on the M10-D? Link to post Share on other sites More sharing options...
IkarusJohn Posted April 23, 2024 Share #112 Posted April 23, 2024 2 hours ago, graphlex said: How do you manually select a lens on the M10-D? That’s a good question! The lens simply comes up as uncoded on the M10-D, if I recall correctly - I can’t check, as my M10-D is back in Wetzlar, and my computer with all my photos is down. 1 Link to post Share on other sites More sharing options...
Malabito Posted April 23, 2024 Share #113 Posted April 23, 2024 So, after using my M11 for over a month, it finally froze. It has actually happened a couple of times already. It happened while shooting with high continuous. Before that, I had been using single shot or low continuous and hadn't had any issues. I have the latest firmware. It's funny that we have €8,000 cameras and have to be happy with occasional hiccups. With the M240 and M10, I never had this issue. Actually, with the M240, I had the camera lock up perhaps once or twice during five years, and the M10 never really locked up. Worts part is the lack of acknowledgement from Leica or any statement that they are working on it... it's been 2 years since the camera was released. 1 Link to post Share on other sites More sharing options...
geoffc60 Posted April 23, 2024 Share #114 Posted April 23, 2024 2 hours ago, Malabito said: So, after using my M11 for over a month, it finally froze. It has actually happened a couple of times already. It happened while shooting with high continuous. Before that, I had been using single shot or low continuous and hadn't had any issues. I have the latest firmware. It's funny that we have €8,000 cameras and have to be happy with occasional hiccups. With the M240 and M10, I never had this issue. Actually, with the M240, I had the camera lock up perhaps once or twice during five years, and the M10 never really locked up. Worts part is the lack of acknowledgement from Leica or any statement that they are working on it... it's been 2 years since the camera was released. There have been reports of newer firmware incoming to address these issues. We shall see. Link to post Share on other sites More sharing options...
JohnQ Posted April 23, 2024 Share #115 Posted April 23, 2024 Mine is always switched off after shooting and then on again sometimes in quick succession. I have deliberately steered clear of updates. I always save to card not internal memory and shoot raw. I have never had a freeze nor a corrupted file. The camera is two years old 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now