Jump to content

Recommended Posts

And another, same as above

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 15
Link to post
Share on other sites

Another Millbay day. Leica M3, Jupiter 3 50mm f1.5, Ilford FP4+ at 80 in PMK Pyro

 

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Edited by Charles Morgan
  • Like 17
  • Thanks 1
Link to post
Share on other sites

On 5/7/2021 at 11:07 AM, John Robinson said:

Into the mist.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Leica R5, Elmarit-R 90 (I), Fuji Superia 400.

No excuse for taking the liberty of pulling this photo from the archive, as this photo has a dynamic that appeals to my imagination and I can loose myself in it until the horses and riders sway out of view.

On 5/9/2021 at 7:30 PM, Kl@usW. said:

Cherry blossom #3

HB 205, Planar 80, Yellow filter, PanF, Rodinal

Another view from your hammock Klaus? Either way its a delightful view and grateful welcome to the season.

  • Thanks 2
Link to post
Share on other sites

What do i make wrong?
I can not see a photo. Just a gray box with a question mark. Others seem to see it as it should …
The second picture i can see.
Are there any settings to do? i watch on a mac…

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Leica iiif + Nippon Kogaku Nikkor HC 50mm LTM + Fuji Industrial/CYO 100ASA

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 15
Link to post
Share on other sites

Leica iiif + Nippon Kogaku Nikkor HC 50mm LTM + Fuji Industrial/CYO 100ASA

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 9
  • Haha 1
Link to post
Share on other sites

1 hour ago, verwackelt said:

What do i make wrong?
I can not see a photo. Just a gray box with a question mark. Others seem to see it as it should …
The second picture i can see.
Are there any settings to do? i watch on a mac…

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

I’m not sure - have you tried a refresh?

Link to post
Share on other sites

I would be grateful for some advice on an Ilford Delta 400 film I had developed for me. Some banding in the images, which I wonder are caused by me - light leak or something in the developing process. 

All frames seems to have banding to different degrees. Here is an example or two. The bottom image is one from the end of the roll, where the issue becomes severe. Any thoughts gratefully received. I have not had this issue on other films with my M cameras and this particular film was shot a good while back, so it could be user error on my part rather than camera fault. 

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 8
Link to post
Share on other sites

From the same roll of Delta 400 - this one towards the end of the roll

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

  • Like 4
Link to post
Share on other sites

31 minutes ago, HighlandLeica said:

I would be grateful for some advice on an Ilford Delta 400 film I had developed for me. Some banding in the images, which I wonder are caused by me - light leak or something in the developing process. 

All frames seems to have banding to different degrees. Here is an example or two. The bottom image is one from the end of the roll, where the issue becomes severe. Any thoughts gratefully received. I have not had this issue on other films with my M cameras and this particular film was shot a good while back, so it could be user error on my part rather than camera fault. 

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Lovely photo otherwise. Too bad. It looks like a light leak, but others will know better. And you can try double-posting here, which is probably going to generate more detailed discussion:

https://www.l-camera-forum.com/forum/29-film-forum/

  • Thanks 2
Link to post
Share on other sites

Netherlands, Valkenisse

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Rolleiflex 6006, Ilford FP4+

 

  • Like 18
  • Thanks 1
Link to post
Share on other sites

Into the sun ...

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Canon EOS 1n, EF 28-105, Ilford XP2

  • Like 11
Link to post
Share on other sites

vor 4 Stunden schrieb ruskkyle:

I’m not sure - have you tried a refresh?

Yes, i tried refresh page and "right click to load picture" and he shows error 404.

Must be here the mistake. It is only sometimes and others see the picture…

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...