james.heredia Posted January 13, 2019 Share #1 Posted January 13, 2019 Advertisement (gone after registration) Hi there, I am having a sensor issue I believe - not sure, so I figured i'd ask here. I have some images below, if you could please take a look - wondering if theres anyone else experiencing same issues. thanks Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/293253-m10-lines-across-sensor/?do=findComment&comment=3663891'>More sharing options...
Advertisement Posted January 13, 2019 Posted January 13, 2019 Hi james.heredia, Take a look here M10 Lines across sensor. I'm sure you'll find what you were looking for!
wjdrijfhout Posted January 13, 2019 Share #2 Posted January 13, 2019 Looks to me a sensor issue and looks very similar to what I had many years ago with an M240, brand new out of the box. I went back to the dealer and Leica replaced it immediately, within 2 days. How old is your camera? Has it always been there, or did it just show up? Link to post Share on other sites More sharing options...
james.heredia Posted January 14, 2019 Author Share #3 Posted January 14, 2019 Its exactly a year old, bought it last year around this time. I called up Leica store Miami where I bought it, hope to hear back soon. Link to post Share on other sites More sharing options...
adan Posted January 14, 2019 Share #4 Posted January 14, 2019 Hard to tell from the full-frame sample (too small) - does the line run the full width (into the shadow on the right) or does it stop halfway? Because it looks like a read-out error. To save time, most sensors are "read" from both ends at once, the right half of the picture out through a different set of contacts/wiring than the left half. <--[ | ]--> Not that it actually matters much - definitely a warrantied flaw whether sensor or downstream electronics, and will need to go to Leica in any case. Link to post Share on other sites More sharing options...
cafecacao Posted January 15, 2019 Share #5 Posted January 15, 2019 My M10 got same issue, sent to Germany to replace sensor Link to post Share on other sites More sharing options...
jto555 Posted January 15, 2019 Share #6 Posted January 15, 2019 A stuck pixel. Lecia can map it out, but unfortunately it is a return to Leica issue. Link to post Share on other sites More sharing options...
schllnbrgr Posted January 18, 2019 Share #7 Posted January 18, 2019 Advertisement (gone after registration) had the same problem with a new m10. this is caused by a "hot pixel". just contact Leica support. they need some sample pictures and will create a custom firmware for you to map out the pixel (should take about 2-5 days until they respond with the firmware) After installing the new firmware the problem ist gone! Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now