Sreggy3 Posted March 9, 2016 Share #1 Posted March 9, 2016 Advertisement (gone after registration) Hey everyone! I have been noticing a small hair in the upper right hand corner of my developed film scans. Here is a link: http://imgur.com/a/SjQK8 Was wondering if anyone could give e some suggestions as to where this could be coming from? It seems to move around slightly, and I have used a rocket air blaster on the inside of the camera + lens with no results. Using a lecia m6 ttl with a 35mm summicron f2 asph Any help would be appreciated! Thank you. Link to post Share on other sites More sharing options...
Advertisement Posted March 9, 2016 Posted March 9, 2016 Hi Sreggy3, Take a look here M6 TTL Small Hair Upper Right. I'm sure you'll find what you were looking for!
pop Posted March 9, 2016 Share #2 Posted March 9, 2016 Look at the negatives. Can you see anything like that hair? Link to post Share on other sites More sharing options...
Sreggy3 Posted March 9, 2016 Author Share #3 Posted March 9, 2016 I will check my negatives tonight when I get home. Thank you for your suggestion It has been present on about 4 of my most recent rolls of film. Link to post Share on other sites More sharing options...
Rus Posted March 9, 2016 Share #4 Posted March 9, 2016 probably in the scanner? Link to post Share on other sites More sharing options...
Leicanerd Posted March 9, 2016 Share #5 Posted March 9, 2016 Hi,There seems to be a lint which is stuck in the track of the focal plane shutter. To get it, you will need to open the shutter with B.RegardsLudwig Link to post Share on other sites More sharing options...
Sreggy3 Posted March 10, 2016 Author Share #6 Posted March 10, 2016 Hi, There seems to be a lint which is stuck in the track of the focal plane shutter. To get it, you will need to open the shutter with B. Regards Ludwig Thank you for your suggestion. I will try this and report back! Link to post Share on other sites More sharing options...
tatetate Posted March 16, 2016 Share #7 Posted March 16, 2016 Advertisement (gone after registration) What scanner are you using? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.