Jump to content

Leica M11/M11-M/M11-P/M11-D: Firmware Update v.2.1.3 with further improvements


Recommended Posts

x
vor 42 Minuten schrieb hdmesa:

Yes, it's time they add a built-in EVF, global shutter sensor, and IBIS! 

points 2 and 3 are fine with me - however regarding point 1 i can't imagine ever agreeing to an OVF-less solution in an M camera.  one kills that way the essence of an M, neglects its raison d'être !

how about a HVF, H for hybrid ?  just sparsely - upon button press - projecting EVF stuff into the OVF, without overloading the picture ?

Edited by fenykepesz
  • Like 2
Link to post
Share on other sites

I can’t seem to get Fotos to connect to my M11 now to get this update. Worked fine for the previous updates. Is there a way to connect via USB C cable? If I try that, it switches to remote mode.

Edit: New iPhone. Worked after deleting the camera on Fotos and deleting the phone in the camera pairing settings.

Edited by TheEyesHaveIt
Link to post
Share on other sites

2 hours ago, hdmesa said:

And I expect Leica to time travel back two years to fix this outrage! 😂

😄

On the other hand? Leica could theoretically add EFCS to M11 via firmware update.

Edited by SrMi
Link to post
Share on other sites

20 hours ago, North17 said:

Version 2.1.2 was quite okay, but the promised improvements were too tempting to resist. I jumped in. Updating through Leica FOTOS went smoothly.

There's just one thing I noticed when I reverted to factory settings. The low battery prompt just appeared out of nowhere. My battery was fully charged. It did revert the settings, but I did that twice just to be sure. I got worried about the prompt and it's good that it did not appear again. 😅 Hoping for the best. 🤞

I ‘ve had this on 2.1.2. The low battery whilst full prompt.

  • Thanks 1
Link to post
Share on other sites

16 hours ago, hdmesa said:

Everyone, don't forget to do a factory reset before reporting you're still having issues.

From the release notes:

+1. Forgotten it in the first place but since i did a factory reset i haven't got any new freezes so far.

  • Like 1
Link to post
Share on other sites

17 hours ago, hdmesa said:

Everyone, don't forget to do a factory reset before reporting you're still having issues.

From the release notes:

Updated ok to 2.1.3 via USB/iPad/Fotos, Settings report Firmware Version is now 2.1.3.........All good, but how do you revert the M11-D's to Factory Settings and is there a way to copy the existing M11-D Settings then Paste them in after the Factory Reset?

Can't find how to do this with Fotos or the online manual, just when I think I've got this camera nailed it makes me feel stupid again.

Link to post
Share on other sites

45 minutes ago, Smudgerer said:

Updated ok to 2.1.3 via USB/iPad/Fotos, Settings report Firmware Version is now 2.1.3.........All good, but how do you revert the M11-D's to Factory Settings and is there a way to copy the existing M11-D Settings then Paste them in after the Factory Reset?

Can't find how to do this with Fotos or the online manual, just when I think I've got this camera nailed it makes me feel stupid again.

The reset is described in the manual, but saving settings to apply them after the reset does not exist – you'll have to configure them again. 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

 

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...