Summilux 21mm f:1.4 Asph

[epand56]

Advertisement (gone after registration)

Please anybody knows if the M 240 has the lens detection for the Summilux 21mm f:1.4 Asph.?
I can't find it in the list of lenses in the Lens Detection menu.

I have the firmware 2.0.6.0
Is there a new upgrade i didn't see?

Find this quite strange.
Thank you for any help.

[FrozenInTime]

Can you set detection to Automatic

[wda]

Surely your lens is 6-bit coded? If so, why do you need to look up the lens?

[NigelG]

As far as I can recall, the lenses listed are only those that could have been supplied pre 6-bit coding being introduced ie where auto detection won’t work.

All Summilux 21s are coded so they don’t need to be listed....

[Simone_DF]

The OP has a Voigtlander 21mm 1.4, not the Summilux, that's why he's looking for the lens in the detection menu.

@epand your best bet is to code the lens yourself, that's what I did with the Ultron 

[lct]

1 minute ago, NigelG said:

All Summilux 21s are coded so they don’t need to be listed

Too bad for Far Eastern lenses needing (?) to be coded as Leica lenses.

[epand56]

Advertisement (gone after registration)

6 minutes ago, Simone_DF said:

The OP has a Voigtlander 21mm 1.4, not the Summilux, that's why he's looking for the lens in the detection menu.

@epand your best bet is to code the lens yourself, that's what I did with the Ultron 

Simene, you're right. I 6bit coded my CV 21/1.4 as a Summilux 21, but maybe I did something wrong because when switching on the LV, camera told be no lens was attached. 
Thank you all for your answers. I will try again.
Wish you all a merry Christmas and a hopefully better new year (shouldn't be so difficult).

[a.noctilux]

9 hours ago, epand56 said:

Simene, you're right. I 6bit coded my CV 21/1.4 as a Summilux 21, but maybe I did something wrong because when switching on the LV, camera told be no lens was attached. 
Thank you all for your answers. I will try again.
Wish you all a merry Christmas and a hopefully better new year (shouldn't be so difficult).

If you set to no lens detection (that is my way when I use LV or EVF), this message would not appear.

[jankap]

See here: https://lavidaleica.com/content/leica-lens-codes

[epand56]

17 hours ago, a.noctilux said:

If you set to no lens detection (that is my way when I use LV or EVF), this message would not appear.

Arnaud, thank you for your hint. I managed to code my Nokton 21/1.4 as Summilux 21/1.4 and now it perfectli works and is correctly detected by camera. I was just doing it the wrong way.

[epand56]

16 hours ago, jankap said:

https://lavidaleica.com/content/leica-lens-codes

Jaap, thank you. I made it with the correct Sharpie.