Michael Geschlecht Posted May 29, 2019 Share #41 Posted May 29, 2019 Advertisement (gone after registration) Hello Doug, This is 1 of the reasons that it is good that this Forum is here. A person can pick up a piece of in formation here. Another 1 over there. Compare & correct another somewhere else & so on. This is how knowledge is assembled. Best Regards, Michael Link to post Share on other sites More sharing options...
Advertisement Posted May 29, 2019 Posted May 29, 2019 Hi Michael Geschlecht, Take a look here Strength of old elpro close-up filters.. I'm sure you'll find what you were looking for!
ramarren Posted May 29, 2019 Share #42 Posted May 29, 2019 All I can tell you is that if you order an “x to series VII step up ring”, it fits the ELPRO VIIa and VIIb perfectly, the two ELPRO lenses screw into each other perfectly, and the Series VII retaining ring screws into both of them perfectly. An “x to 54mm” step up ring fits perfectly too. And the retaining ring fits my R lenses that are listed as taking Series VII filters. Seems to me that the threads all have to be 54mm and the thread pitch the same. Link to post Share on other sites More sharing options...
Michael Geschlecht Posted May 29, 2019 Share #43 Posted May 29, 2019 (edited) 17 minutes ago, ramarren said: All I can tell you is that if you order an “x to series VII step up ring”, it fits the ELPRO VIIa and VIIb perfectly, the two ELPRO lenses screw into each other perfectly, and the Series VII retaining ring screws into both of them perfectly. An “x to 54mm” step up ring fits perfectly too. And the retaining ring fits my R lenses that are listed as taking Series VII filters. Seems to me that the threads all have to be 54mm and the thread pitch the same. Hello Ramarren, Yes, that is the idea. Would you be able to measure the pitch on a Series VIII (8) filter retaining ring for us? Best Regards, Michael Edited May 29, 2019 by Michael Geschlecht Link to post Share on other sites More sharing options...
ramarren Posted May 30, 2019 Share #44 Posted May 30, 2019 (edited) 1 hour ago, Michael Geschlecht said: Hello Ramarren, Yes, that is the idea. Would you be able to measure the pitch on a Series VIII (8) filter retaining ring for us? Best Regards, Michael I'd be happy to, if I owned any Series VIII bits. I only have Series VII. Series VII, near as I can measure it with somewhat clumsy tools, runs 0.75mm per thread. That's measured on the Leica 14161 retaining ring. The diameter of the Leica Series VII UV filter in the retainer is 50.8mm. The measured diameter of the male threads to their outside edges is 53.7mm, presumably the "54mm" is a nominal figure. I suspect that the Series VIII have the same thread pitch, just handle the larger 63.5mm filter disks, but of course that's pure conjecture. An interesting detail in the R lenses is that my Summilux-R 50 and Elmarit-R 28 both take Series VII filters, but the lens hood is the retaining mechanism and the ELPRO VIIa and VIIb cannot be fitted. These lenses' bezels are threaded, however, and I believe take something like a 48mm thread ring. I should pick up that book dunk is referring to ... But I use filters and close up lenses relatively infrequently and my setup is all worked out already. Edited May 30, 2019 by ramarren 1 Link to post Share on other sites More sharing options...
Petercoll Posted June 1, 2019 Share #45 Posted June 1, 2019 Summicron 50mm f2 R (Canada) with Elpro (Portugal) screw on adapter. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 2 Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/296687-strength-of-old-elpro-close-up-filters/?do=findComment&comment=3751707'>More sharing options...
ramarren Posted June 2, 2019 Share #46 Posted June 2, 2019 Peter, I presume this is the ELPRO VIa or VIb ..? I have one of the Summicron-R 50mm f/2 lenses ... an early one, 1964 vintage. I've been meaning to send it to DAG for a CLA because the focusing ring is too stiff ... the grease must have turned to goo by now. Lovely lens, regardless. 1 Link to post Share on other sites More sharing options...
Petercoll Posted June 2, 2019 Share #47 Posted June 2, 2019 Advertisement (gone after registration) 10 hours ago, ramarren said: Peter, I presume this is the ELPRO VIa or VIb ..? I have one of the Summicron-R 50mm f/2 lenses ... an early one, 1964 vintage. I've been meaning to send it to DAG for a CLA because the focusing ring is too stiff ... the grease must have turned to goo by now. Lovely lens, regardless. Am not clear on nomenclature. The 50mm R fits the R to L adapter, aperture pin wise, so must be post 1967 ? Anyway, I paid under £50 off EBay, and I’m staggered of the quality of both, the adapter has threads on both sides. The other lens I adore is the 90mm f2 R . Link to post Share on other sites More sharing options...
graeme_clarke Posted June 7, 2019 Share #48 Posted June 7, 2019 I've got Seiko Bronica +1 and +2 lenses with 62mm thread and a 52-62 adapter ring. So far some good results with the +2 lens. (Adding the +1 and +2 together results in vignetting. I've also got a R 100mm 2.8 Apo macro and the Elpro 1:1 adapter. The elpro is a cracking lens to turn the 100mm 1:2 macro into 1:1. Does anyone know the power of the 1:1 Elpro adapter please? With the +2 on a 18-56 at 56, the field of view in focus is about 100mm. Holding the Elpro 1:1 adapter over the front of the lens at 56mm the field of view is about 60mm with no vignetting. I can get a 52-60 step up ring from Ebay for £3.88 so making a small(ish) macro lens. Of course you may rightly ask why not use the 100mm elpro on the CL camera (and I do have an R-L adapter) - but it makes for a sizeable bit of kit and no autofocus. Ideal for carrying in the car but for walking about! Looking forward to your sage words of wisdom... Graeme 1 Link to post Share on other sites More sharing options...
bags27 Posted June 7, 2019 Share #49 Posted June 7, 2019 A lot of folks like the Marumi best as a filter (brilliantly used on the Q macro thread by Zampelis). I don't have the R 100mm 2.8 Apo macro, but I know it's one of the greatest macros ever, and it's on my lust list. Link to post Share on other sites More sharing options...
dkCambridgeshire Posted June 7, 2019 Share #50 Posted June 7, 2019 2 hours ago, graeme_clarke said: I've got Seiko Bronica +1 and +2 lenses with 62mm thread and a 52-62 adapter ring. So far some good results with the +2 lens. (Adding the +1 and +2 together results in vignetting. I've also got a R 100mm 2.8 Apo macro and the Elpro 1:1 adapter. The elpro is a cracking lens to turn the 100mm 1:2 macro into 1:1. Does anyone know the power of the 1:1 Elpro adapter please? With the +2 on a 18-56 at 56, the field of view in focus is about 100mm. Holding the Elpro 1:1 adapter over the front of the lens at 56mm the field of view is about 60mm with no vignetting. I can get a 52-60 step up ring from Ebay for £3.88 so making a small(ish) macro lens. Of course you may rightly ask why not use the 100mm elpro on the CL camera (and I do have an R-L adapter) - but it makes for a sizeable bit of kit and no autofocus. Ideal for carrying in the car but for walking about! Looking forward to your sage words of wisdom... Graeme https://www.l-camera-forum.com/leica-wiki.en/index.php/ELPRO_1:2-1:1 … it's a 3 element achromat with a 95mm focal length = 0.095m Thus diopter strength is 1/f = 1/0.095 = 10.53 diopters . Please refer to page 164, 'Excellence in Photography APPLIED LEICA TECHNIQUE' by Günter Osterloh for diopter strength calculations of both single and combined lenses However, the actual magnification when attached to the 100mm f2.8 APO R lens is 1.1:1 … the additional 0.1x magnification enabling slide copying 'in the slide mount' without including the slide frame border. dunk Link to post Share on other sites More sharing options...
graeme_clarke Posted June 7, 2019 Share #51 Posted June 7, 2019 Dunk - that's brilliant! Thanks so much for the references. I don't have Excellence in Photography... readily available but the Leica-Wiki link is most useful. I'll get an adapter ordered and post some pictures when I can. Graeme Link to post Share on other sites More sharing options...
dkCambridgeshire Posted June 7, 2019 Share #52 Posted June 7, 2019 8 minutes ago, graeme_clarke said: Dunk - that's brilliant! Thanks so much for the references. I don't have Excellence in Photography... readily available but the Leica-Wiki link is most useful. I'll get an adapter ordered and post some pictures when I can. Graeme They are scarce but Ffordes lists one https://www.ffordes.com/p/SOR-18-017012/lenses-leica-r/elpro-12-11-for-100mm-f28 dunk Link to post Share on other sites More sharing options...
graeme_clarke Posted June 7, 2019 Share #53 Posted June 7, 2019 Thanks Dunk - I have the Elpro 1:1 to go with my 100mm macro lens. With a cheap 52-60mm step up ring from Ebay I can mount it onto an 18-56 by keeping the lens part of the elpro inside its lens hood - otherwise the rear element would protrude too far. I've been looking to source a reasonably priced copy of the book you refer to... More digging needed! Graeme 1 Link to post Share on other sites More sharing options...
ramarren Posted June 8, 2019 Share #54 Posted June 8, 2019 (edited) In a moment of amusement, I saw a pair of ELPRO Series VIa and Vis close up lenses available on Ebay for $30. I have a 1964 issue Summicron-R 50mm f/2 that they fit perfectly, so I nabbed them. They fit perfectly, and net yet another close up solution with the CL (or one of my R bodies for that matter). And I happen to have the Leica Series VI retaining ring, so I can just find some Series VI filters if I want to use a filter with them. Fun fun fun... And pretty darn cheap! Now I should send that lens out to DAG and have it CLAed ... the focusing mount grease has turned to mud and needs to be restored. Edited June 8, 2019 by ramarren Link to post Share on other sites More sharing options...
dkCambridgeshire Posted June 8, 2019 Share #55 Posted June 8, 2019 10 hours ago, graeme_clarke said: Thanks Dunk - I have the Elpro 1:1 to go with my 100mm macro lens. With a cheap 52-60mm step up ring from Ebay I can mount it onto an 18-56 by keeping the lens part of the elpro inside its lens hood - otherwise the rear element would protrude too far. I've been looking to source a reasonably priced copy of the book you refer to... More digging needed! Graeme Amazon UK have several … search Books using 'Günter Osterloh' … also one on Ebay dunk Link to post Share on other sites More sharing options...
graeme_clarke Posted June 8, 2019 Share #56 Posted June 8, 2019 Thanks Dunk - will do... Graeme Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now