Sarnian Posted July 15 Share #241 Posted July 15 Advertisement (gone after registration) On 7/14/2025 at 7:27 AM, Sarnian said: On the Facebook group: “V2.3 mainly for match better with CS lenses and also continue to improve focus accuracy”. After a SUPER quick test with my 30-90mm I can confidently say that V2.3 has vastly improved the autofocus with a lot less hunting/settling. I haven't looked to see if the EXIF data is correct (although it was with V2.2). The sharpness has always been there. This adapter is now fit for purpose to go out into the big, wide world. 2 1 Link to post Share on other sites More sharing options...
Advertisement Posted July 15 Posted July 15 Hi Sarnian, Take a look here Leica S lens on Fuji GFX 50s. I'm sure you'll find what you were looking for!
Sarnian Posted July 16 Share #242 Posted July 16 (edited) On 7/15/2025 at 8:14 AM, Sarnian said: I haven't looked to see if the EXIF data is correct (although it was with V2.2). The EXIF data correctly reports the various focal lengths that I used. 👍 Edited July 16 by Sarnian 1 Link to post Share on other sites More sharing options...
Tirpitz666 Posted July 17 Share #243 Posted July 17 Seems we are slowly getting there.. 🙂 Sooner or later will have to decide between this and the Leica one for the SL, which are basically the same price. 1 Link to post Share on other sites More sharing options...
Einst_Stein Posted July 17 Share #244 Posted July 17 14 hours ago, Tirpitz666 said: Seems we are slowly getting there.. 🙂 Sooner or later will have to decide between this and the Leica one for the SL, which are basically the same price. Without official authorized specs, the reverse engineering products like this usually take 10% of time to make it 90% right, and then 90% of time to make the rest 10% right, assuming the other parts (camera, lens) do not have changes, update, or new firmware. 1 Link to post Share on other sites More sharing options...
sostinv Posted July 31 Share #245 Posted July 31 Has anyone tested the adapter on the 100S II? Mine doesn't work with S35. The motor turns on and off periodically. Doesn't output an image on the LCD. Link to post Share on other sites More sharing options...
Leica Land Posted August 4 Share #246 Posted August 4 hi I downloaded the the firmware 2.3 it is 84Kb but when it is transfer to the adapter it show only 1Kb . Am i doing something wrong, thanks Link to post Share on other sites More sharing options...
sostinv Posted August 4 Share #247 Posted August 4 (edited) Advertisement (gone after registration) Which file do you mean saying about 1 Kb? After DAT file transfers, wait ~10 sec and removable disk should remount. After that, the name of the text file in the root should be changed. Something like "V_01_3" to "V_02_3". Transferred DAT file should not be there anymore. If so, the update went successfully. Edited August 4 by sostinv Link to post Share on other sites More sharing options...
Leica Land Posted August 4 Share #248 Posted August 4 2 hours ago, sostinv said: Which file do you mean saying about 1 Kb? After DAT file transfers, wait ~10 sec and removable disk should remount. After that, the name of the text file in the root should be changed. Something like "V_01_3" to "V_02_3". Transferred DAT file should not be there anymore. If so, the update went successfully. KIPON (D:) Name date modified Type Size v2_30 11/7/2025 8:41pm text document 1 KB Link to post Share on other sites More sharing options...
sostinv Posted August 14 Share #249 Posted August 14 On 6/14/2025 at 9:30 AM, ZHNL said: Here are some updates I posted in FB group. Reinstalled the firmware, both 120 and 180 was accepted as 100mm f2. I can control the aperture but IBIS will be not as useful. Another interesting finding is if I reinstall firmware, basically remove all the lenses info. And if I attach 100cron first, it will recognize 100mm and F2. Then it will refuse take 120 and 180. Both will focus back and forth forever. Redo the same process, if I attach 120 or 180 first, it will take them and treat them as 100mm f2. Actually both will be detected as 100mm f2. I can change aperture and use them. And you guess it right, it will not take 100mm anymore. I believe firmware 1.3 added 100mm support but screw up 120 and 180. With firmware 1.2, 100mm was not supported but both 120 and 180 are treated as the same lens as 120 with f2.5 aperture. Here you can see 24/35/70 are beautifully supported but 100/120/180 all show lens unavailable even I can see focal length documented as 100mm. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Could you please try to repeat the trick with 35/70 pair? If we reinstall FW and mount 35 first, will it work? This is the only lens I have and it focuses back and forth forever. I suppose if I mounted another one (70 for example), 35 could start working after that (probably a lens could talk some info to an adapter to remember on first start, e.g. encrypting keys etc, and 35 might not do that for some reason). No support from Kipon, full ignoring everywhere (emails, instagram). Link to post Share on other sites More sharing options...
ZHNL Posted August 16 Share #250 Posted August 16 In this case, the best bet is update your 35mm lens firmware with 007 or S3. I don’t have single case that adapter won’t recognize 35mm over all the firmware so far. you can try to reinstall latest firmware and mount it again. I don’t think 70mm will help 35mm support. In my case, I feel the adapter is just confused with 100 and 180/120mm lenses so only one can be supported. 1 Link to post Share on other sites More sharing options...
Tirpitz666 Posted September 10 Share #251 Posted September 10 (edited) Hi folks, apparently there is a new kid on the block, the XPIMAGE S to GFX adaper: For the time being it's able to only control aperture, they state that "they are working on AF capabilities that should be added with a later FW update", how it's a mistery to me since they don't even have a website (at least I cannot find it through a simple Google search, guess it's deep in the Chinese web). It's not cheap at around 500 quid/euros, but since Amazon sells it and in case I guess I can return it with no hassle, I decided to do the guinea pig for you all and ordered one, will keep you posted when I get it 🙂 Edited September 10 by Tirpitz666 2 Link to post Share on other sites More sharing options...
Stuart Richardson Posted September 10 Share #252 Posted September 10 (edited) Hopefully it works well and does not cause any harm. Given the Kipon, I think I would probably stick with that, however. Edited September 10 by Stuart Richardson Link to post Share on other sites More sharing options...
Tirpitz666 Posted September 11 Share #253 Posted September 11 Yes sure, let's really hope that 🤞 The Kipon now is for sure more "tried and tested" (and does AF for what matters) but at more than 1000 Euro (and it's not clear to me if they ship from Europe or not, otherwise you will even have to add VAT and duties to that) is way too expensive for my tastes for an adapter. 1 Link to post Share on other sites More sharing options...
Sarnian Posted September 11 Share #254 Posted September 11 54 minutes ago, Tirpitz666 said: Yes sure, let's really hope that 🤞 The Kipon now is for sure more "tried and tested" (and does AF for what matters) but at more than 1000 Euro (and it's not clear to me if they ship from Europe or not, otherwise you will even have to add VAT and duties to that) is way too expensive for my tastes for an adapter. Or you can buy my second copy that I've listed on eBay.co.uk: https://www.ebay.co.uk/itm/136345903832 I've updated the firmware on it, too. Link to post Share on other sites More sharing options...
Tirpitz666 Posted September 11 Share #255 Posted September 11 Hi, thank you, sent you a PM Link to post Share on other sites More sharing options...
chrismuc Posted September 13 Share #256 Posted September 13 On 9/11/2025 at 4:28 AM, Tirpitz666 said: Hi folks, apparently there is a new kid on the block, the XPIMAGE S to GFX adaper: For the time being it's able to only control aperture, they state that "they are working on AF capabilities that should be added with a later FW update", how it's a mistery to me since they don't even have a website (at least I cannot find it through a simple Google search, guess it's deep in the Chinese web). It's not cheap at around 500 quid/euros, but since Amazon sells it and in case I guess I can return it with no hassle, I decided to do the guinea pig for you all and ordered one, will keep you posted when I get it 🙂 XPimage produces very reliable mechanical adapters, I use several. That’s the first one with electronics. Let’s hope they achieve to make it work. In China nowadays you not necessarily have a website, all is done at various specifically Chinese phone Apps. Link to post Share on other sites More sharing options...
chrismuc Posted September 13 Share #257 Posted September 13 Ok I also ordered one. Shall receive it in Guangzhou from Shanghai within a few days, will take it to Germany next week and will test it. Will report. 😋 1 Link to post Share on other sites More sharing options...
Tirpitz666 Posted September 13 Share #258 Posted September 13 Cool, looking forward for your findings! (at the end I bought Sarnian's spare Kipon so most likely will cancel my order for the XPimage, but as you said, their mechanical adapters are pretty good, so I'm confident that this is a good product, I've also read somewhere that they should be some kind of re-gathering of Kipon's former employees, but no certainty about that). Link to post Share on other sites More sharing options...
tom0511 Posted September 15 Share #259 Posted September 15 So is the Kipon now a product that works? How good is the AF on the Fuji camera with a S lens? Link to post Share on other sites More sharing options...
Sarnian Posted September 15 Share #260 Posted September 15 It hunts for something to focus on when you’re just walking around (although so does Leica’s own Contax 645 adapter). When you focus on something it locks on pretty quickly and the images are tack sharp. I use it with my 30-90mm. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now