Ozytripper Posted July 10, 2017 Share #41 Posted July 10, 2017 Advertisement (gone after registration) I think this is a case that should be solved by Leica, Forum advice will not suffice. I suggest that you contact Wetzlar directly. New firmware update to be released later today. Hope it solves my problem Perhaps I am not the only one having problems with 1.7.4.0 Link to post Share on other sites More sharing options...
Advertisement Posted July 10, 2017 Posted July 10, 2017 Hi Ozytripper, Take a look here Leica M10 Firmware Update: Improved SD Card Reliability. I'm sure you'll find what you were looking for!
thm Posted July 10, 2017 Share #42 Posted July 10, 2017 M10 Firmware 1.9.4.0 is live on the Leica site: https://us.leica-camera.com/content/download/142079/2315264/version/4/file/M10-1.9.4.0-CUSTOMER.FW Link to post Share on other sites More sharing options...
Berlinman Posted July 10, 2017 Share #43 Posted July 10, 2017 With the new firmware if I do an exposure compensation (any) the general info before the shot shows it correctly but after the shot, in play mode, the photo informations show always as if it was taken to -3. Someone else with same defect ? I have the same problem. Gesendet von iPhone mit Tapatalk Link to post Share on other sites More sharing options...
Berlinman Posted July 10, 2017 Share #44 Posted July 10, 2017 M10 Firmware 1.9.4.0 is live on the Leica site: https://us.leica-camera.com/content/download/142079/2315264/version/4/file/M10-1.9.4.0-CUSTOMER.FWIn Germany I see only the old 1.7.4.0. Gesendet von iPhone mit Tapatalk Link to post Share on other sites More sharing options...
fatihayoglu Posted July 10, 2017 Share #45 Posted July 10, 2017 UK has only 1.7.4 also Link to post Share on other sites More sharing options...
Al_OOF Posted July 10, 2017 Share #46 Posted July 10, 2017 After this new firmware my M10 has the same two problems as before: that quoted by Berlinman Immediately above and the fact that my Elmar 24 asph (coded in factory) is not recognized. Ahead with new adventures... Link to post Share on other sites More sharing options...
fatihayoglu Posted July 10, 2017 Share #47 Posted July 10, 2017 Advertisement (gone after registration) After this new firmware my M10 has the same two problems as before: that quoted by Berlinman Immediately above and the fact that my Elmar 24 asph (coded in factory) is not recognized. Ahead with new adventures... I have the same problem as well. What i found interesting is, if i have a picture with exposure compensation and use only left and right arrow to navigate through the pictures, the EC value stays correct. As soon as I press up and down button, then it goes to -3. Link to post Share on other sites More sharing options...
Al_OOF Posted July 10, 2017 Share #48 Posted July 10, 2017 Do you prefer a trivial bug or a creative bug ? ;-) Link to post Share on other sites More sharing options...
Stonewall Brigade Posted July 11, 2017 Share #49 Posted July 11, 2017 M10 Firmware 1.9.4.0 is live on the Leica site: https://us.leica-camera.com/content/download/142079/2315264/version/4/file/M10-1.9.4.0-CUSTOMER.FW I am rather suspect of this report of a firmware update, as it is not listed on the Leica sites, and I hesitate to upload it to my M10. What do you guys think? Link to post Share on other sites More sharing options...
elmars Posted July 11, 2017 Share #50 Posted July 11, 2017 Here the link to the German site: https://de.leica-camera.com/Fotografie/Leica-M/Leica-M10/Downloads Link to post Share on other sites More sharing options...
LUF Admin Posted July 11, 2017 Author Share #51 Posted July 11, 2017 I am rather suspect of this report of a firmware update, as it is not listed on the Leica sites, and I hesitate to upload it to my M10. What do you guys think? It is definitely an official firmware update: http://en.leica-camera.com/Photography/Leica-M/Leica-M10/Downloads I have no idea why it is not listed via the search function on the Leica website... Link to post Share on other sites More sharing options...
magosak Posted July 11, 2017 Share #52 Posted July 11, 2017 I have the same problem as well. What i found interesting is, if i have a picture with exposure compensation and use only left and right arrow to navigate through the pictures, the EC value stays correct. As soon as I press up and down button, then it goes to -3. Good catch. I reproduced the same problem. After using up/down arrows EC never goes back to the correct value again. Perhaps the image file is altered with wrong EC information. Link to post Share on other sites More sharing options...
Khun Hans Posted July 12, 2017 Share #53 Posted July 12, 2017 Can somebody help me. Bought an M10 yesterday. Can't update the firmware because the existing firmware 1.3.4.0 is greyed out. Thanks Link to post Share on other sites More sharing options...
M11 for me Posted July 12, 2017 Share #54 Posted July 12, 2017 Probably you did not copy the downloaded firmware properly onto the storage card. Did you really copy it to the root? When you look at the content of your card on your PC or Mac then the firmware is NOT in any folder. The best thing is to delete all folders that you see on your card (e.g. DCIM) to make sure that you have the firmware really in the root segment and not in any folder. Link to post Share on other sites More sharing options...
Khun Hans Posted July 12, 2017 Share #55 Posted July 12, 2017 Probably you did not copy the downloaded firmware properly onto the storage card. Did you really copy it to the root? When you look at the content of your card on your PC or Mac then the firmware is NOT in any folder. The best thing is to delete all folders that you see on your card (e.g. DCIM) to make sure that you have the firmware really in the root segment and not in any folder. SORRY. WILLEICA described correct before: 'The greyed out 1.7.4.0 is as it should be. The previous version of the firmware was greyed out before the update. The firmware description only becomes live if an SD card with new firmware is loaded. ' Link to post Share on other sites More sharing options...
magosak Posted July 12, 2017 Share #56 Posted July 12, 2017 Can somebody help me. Bought an M10 yesterday. Can't update the firmware because the existing firmware 1.3.4.0 is greyed out. Thanks Take a picture with the card in. Then the camera will see the new firmware. That was the case for me anyway. Good luck. Sent from my SM-N920C using Tapatalk Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.