weinlamm Posted February 6, 2017 Share #141 Posted February 6, 2017 Advertisement (gone after registration) Coup de founder had written how to use with a Leica. I do it the same way. On other cameras go to S-mode (or Tv on Canon). Gesendet von iPad mit Tapatalk Link to post Share on other sites More sharing options...
Advertisement Posted February 6, 2017 Posted February 6, 2017 Hi weinlamm, Take a look here First impressions - M10. I'm sure you'll find what you were looking for!
Rick Posted February 6, 2017 Author Share #142 Posted February 6, 2017 We have a foot of snow (30cm for those that count by ten) here in the suburbs of Seattle this morning. I'm going to play hooky and go out and shoot the boring M10. Somebody's got to do it. Rick Link to post Share on other sites More sharing options...
otto.f Posted February 6, 2017 Share #143 Posted February 6, 2017 Probably no one else in Seattle would do it either Link to post Share on other sites More sharing options...
Stef63 Posted February 6, 2017 Share #144 Posted February 6, 2017 After one week M10 I'm getting used to ISO dial and I like it. It's a well executed add'on to the camera, very intuitive and you always know in a split second before taking the camera to eyesight what the ISO it is set to. If you prefer the menu ISO, put the dial on the M position and from there on you can change ISO by pressing Menu and ISO in your favorites list. It's an extra action in the menu, I know, but since you love to control the camera using the menu that should not be a problem I guess. To me however the ISO dial is something you will get used to in minutes. Going back to my M240 and MM2 is ... well going back to the previous generation. Link to post Share on other sites More sharing options...
jmahto Posted February 6, 2017 Share #145 Posted February 6, 2017 That's the problem I have never understood with auto ISO I have two requirements from auto-ISO: 1. quality = keep the lowest ISO - go down to 1/30 - assume non-moving target 2. sharpness = Keep the speed minimum to 1/125 No system allows you to flick between these states. They are mutually exclusive and no system I have found makes it easy to alter minimum speed without many menu clicks if they even allow you to do it at all .. This is how I use M240 (and I guess M10 is similar) that should satisfy your requirement. (If you are full manual user then there is nothing here for you. Skip this. ) Configuration and shooting mode for AUTO ISO: ------------------------------------------------------------ Set auto ISO with acceptable high range and minimum shutterspeed that you want (1/30 or 1/FL or 1/2xFL depending on your comfort). Also keep "auto ISO in manual" ON. shoot in A mode (aperture priority). Therefore decision tree is like below: ---------------------------------------------- Does shutterspeed displayed in OVF falls below your "action" threshold (1/125 for walking people, 1/250 for sports....) ? Yes: Do you want higher shutterspeed for action? (note that camera can't decide this for you). Yes: Option1: Open aperture. Option2: Set shutterspeed manually to your higher threshold (1/125, 1/250 or whatever) No: Can you handhold at this speed? Yes: nothing to do. keep shooting. No: Option1: Open aperture. Option2: Use tripod or set the shutterspeed manually to what you can handhold. ISO will climb till it hits your ceiling. You may have to push in PP after that. No: Nothing to do. Keep shooting This decision tree (along with the auto ISO configuration mentioned above, guarantees best picture quality). Link to post Share on other sites More sharing options...
Rick Posted February 7, 2017 Author Share #146 Posted February 7, 2017 Just a boring M10 photograph from today wandering around in the snow. L1030122.jpg by Rick-Leica, on Flickr Link to post Share on other sites More sharing options...
Rick Posted February 7, 2017 Author Share #147 Posted February 7, 2017 Advertisement (gone after registration) Is it just me? No dust spots on sensor. Have any of you had a problem with dust on the sensor? The snow shots from today showed no dust on the sensor (I know, somebody will now find one). I've had many different lenses on my M10 and by now I should have a bunch of junk on my sensor. Leica doing something new? Anti-static coating? Cleaner clean-room at the new factory. Less oil on shutter? Cleaner employees? What? Rick Link to post Share on other sites More sharing options...
digitalfx Posted February 7, 2017 Share #148 Posted February 7, 2017 Is it just me? No dust spots on sensor. Have any of you had a problem with dust on the sensor? The snow shots from today showed no dust on the sensor (I know, somebody will now find one). I've had many different lenses on my M10 and by now I should have a bunch of junk on my sensor. Leica doing something new? Anti-static coating? Cleaner clean-room at the new factory. Less oil on shutter? Cleaner employees? What? Rick They added a mini vacuum above the sensor. The filter must be replaced once a month. The iPhone app will send a reminder. Link to post Share on other sites More sharing options...
Jeff S Posted February 7, 2017 Share #149 Posted February 7, 2017 Is it just me? No dust spots on sensor. Have any of you had a problem with dust on the sensor? The snow shots from today showed no dust on the sensor (I know, somebody will now find one). I've had many different lenses on my M10 and by now I should have a bunch of junk on my sensor. Leica doing something new? Anti-static coating? Cleaner clean-room at the new factory. Less oil on shutter? Cleaner employees? What? Rick I haven't needed to wet clean my M240 sensor glass in the 3.5 years I've owned it. Jeff Link to post Share on other sites More sharing options...
Rick Posted February 7, 2017 Author Share #150 Posted February 7, 2017 I haven't needed to wet clean my M240 sensor glass in the 3.5 years I've owned it. Jeff Ok. But, I haven't even needed to dry clean my M10. Rick Link to post Share on other sites More sharing options...
Jeff S Posted February 7, 2017 Share #151 Posted February 7, 2017 I think my first blow dry on the M240 was after I had it for about 9 months.....and only a couple of times since. This was a significant improvement from my two M8.2s. Jeff Link to post Share on other sites More sharing options...
Rick Posted February 7, 2017 Author Share #152 Posted February 7, 2017 I think my first blow dry on the M240 was after I had it for about 9 months.....and only a couple of times since. This was a significant improvement from my two M8.2s. Jeff That wasn't my experience with hey M240. But, I shoot stopped down much of the time and that brings out the blobs. Fair enough. Let's toss it out into the forum and get some perspective. Rick Link to post Share on other sites More sharing options...
Cliff S Posted February 7, 2017 Share #153 Posted February 7, 2017 I wet cleaned every couple of months. I'm very careful with lens changes and my house air is filtered. The M240 sensor was a dust magnet. Half the reason I exchanged it for the SL. Hoping the M10 is an improvement Link to post Share on other sites More sharing options...
Jeff S Posted February 7, 2017 Share #154 Posted February 7, 2017 There are already loads of discussions.... http://www.l-camera-forum.com/topic/241989-sensor-dust-on-the-m-240/ All I know is my experience, which has been stellar (and often stopped down). Jeff Link to post Share on other sites More sharing options...
elmars Posted February 7, 2017 Share #155 Posted February 7, 2017 Is it just me? No dust spots on sensor. Have any of you had a problem with dust on the sensor? The snow shots from today showed no dust on the sensor (I know, somebody will now find one). I've had many different lenses on my M10 and by now I should have a bunch of junk on my sensor. Leica doing something new? Anti-static coating? Cleaner clean-room at the new factory. Less oil on shutter? Cleaner employees? What? Rick There is a little bit of space between the sensor and the sensor glass, so that dust is less visable. Stefan Daniel told me that. Elmar Link to post Share on other sites More sharing options...
dr.mike Posted February 7, 2017 Share #156 Posted February 7, 2017 Is it just me? No dust spots on sensor. Have any of you had a problem with dust on the sensor? The snow shots from today showed no dust on the sensor (I know, somebody will now find one). I've had many different lenses on my M10 and by now I should have a bunch of junk on my sensor. Leica doing something new? Anti-static coating? Cleaner clean-room at the new factory. Less oil on shutter? Cleaner employees? What? Rick Did you use the Dust Detection? Link to post Share on other sites More sharing options...
Rick Posted February 7, 2017 Author Share #157 Posted February 7, 2017 There is a little bit of space between the sensor and the sensor glass, so that dust is less visable. Stefan Daniel told me that. Elmar Really. My impression was something was different. Rick Link to post Share on other sites More sharing options...
otto.f Posted February 7, 2017 Share #158 Posted February 7, 2017 If you build in a new shutter with that speed and amount of shots per second, I assume you'll think of that oil problem of the past and how to get rid of that. Link to post Share on other sites More sharing options...
Vec Posted February 7, 2017 Share #159 Posted February 7, 2017 Hey Rick, you weren't the only one out in the Seattle snow yesterday! Here's a shot from Green Lake with the M10. (Working from home, so I took a walk down my hill to the little lake) Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Given the wet snow, I was rather happy that the camera is weatherproof since it was getting pretty darn wet. -George Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! Given the wet snow, I was rather happy that the camera is weatherproof since it was getting pretty darn wet. -George ' data-webShareUrl='https://www.l-camera-forum.com/topic/268614-first-impressions-m10/?do=findComment&comment=3206851'>More sharing options...
Rick Posted February 7, 2017 Author Share #160 Posted February 7, 2017 George, Great shot. We lived just up the hill at 7th and N 62 and looked down at the lake from Phinny Ridge. Mark at Glazers only got 4 cameras. We could have been the only Seattleites out shooting the M10 in the snow yesterday! Rick Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.