Jump to content

Lens with characteristics and quality of Summicron 50 rigid for FOV 35mm?


Bundestrainer

Recommended Posts

Treble ditto. I also endorse the 35/2.8 Summaron. At f 5.6 my experience is that it is just as good as, or even better (based ion Kodachrome 25 and 64 -alas now long gone -)

than the f2/35 version I at the same aperture. This may, however, be based on personal perception and the invariably slight differences between individual lenses. In any

case, the 35mm Summaron is small, light and at medium apertures very recommendable.

Teddy

Link to post
Share on other sites

Advertisement (gone after registration)

It would be best for you to visit a dealer with good old stock and see what you think. You like the Summicron; so why not make the 35mm version your No 1 target, but keep you options open if you can try a contemporary alternative.

Link to post
Share on other sites

 Summicron 50 rigid (II)

Did you mean Summicron 50 v.2 assuming v.1 was the collapsible version?  Or actually the 2nd version of the rigid, the 11817 of 1969-78 vintage?  In either case I would say if you were looking for equivalent performance, look at 35 Crons one generation newer.  35's are more difficult lenses to correct, so contemporary ones tended to lag behind the 50's a little.  At least that's what I feel from experience with them.  Given the age of those lenses, you'll want to pay careful attention to condition.  Internal haze and/or coating deterioration makes for some wide sample variation.  Published MTF graphs and written evaluations assume the lens is optically like-new.

Link to post
Share on other sites

 In either case I would say if you were looking for equivalent performance, look at 35 Crons one generation newer.  35's are more difficult lenses to correct, so contemporary ones tended to lag behind the 50's a little.  At least that's what I feel from experience with them.  Given the age of those lenses, you'll want to pay careful attention to condition.  Internal haze and/or coating deterioration makes for some wide sample variation.  Published MTF graphs and written evaluations assume the lens is optically like-new.

 

I've used the 8 element, Summicron ASPH and will be checking out a Summaron soon. You don't hear much about v.2 and 3. Any experience with them?

Link to post
Share on other sites

I got a v2 in 1969 and used it through the film years very happily (along with a v3 50 Summicron). Loved the tiny size and performance at mid apertures. Once I got an M9 I found it wanting wide open. Tried a Zeiss f2, great image but larger than I like. Now use a 35 f2.5 Summarit.

I've also picked up a goggled v1 35 Summicron for my M3, and a 2.8 Summaron. I prefer the added snap of the Summaron over the v1 Summicron.

Link to post
Share on other sites

Did you mean Summicron 50 v.2 assuming v.1 was the collapsible version?  Or actually the 2nd version of the rigid, the 11817 of 1969-78 vintage?  In either case I would say if you were looking for equivalent performance, look at 35 Crons one generation newer.  35's are more difficult lenses to correct, so contemporary ones tended to lag behind the 50's a little.  At least that's what I feel from experience with them.  Given the age of those lenses, you'll want to pay careful attention to condition.  Internal haze and/or coating deterioration makes for some wide sample variation.  Published MTF graphs and written evaluations assume the lens is optically like-new.

 

I'm talking about the first version of the rigid. Sorry but I didn't know there was a second version.

 

Thank you everybody for your answers. Maybe I should add that I intend to use the lens on my Leica M9 body so the lens needs to be "acceptably" sharp wide open. The Summicron v1 seems to be too expensive for my taste.

Link to post
Share on other sites

I've used the 8 element, Summicron ASPH and will be checking out a Summaron soon. You don't hear much about v.2 and 3. Any experience with them?

I have v.3 and v.4, I see hardly any difference in practical shooting.  The v.3 is more solidly built but if you don't mount/dismount the v.4 holding it by the hood, there shouldn't be a problem.    I have had the ASPH (sold it because I like the rendering of the v.4 better) and Summaron (sold it because the infinity lock drove me nuts and I didn't want to butcher it). 

Link to post
Share on other sites

If not already mentioned - 35/2 Summicron v1 is the nicest fit to a rigid 50/2 ;-)

Buy any version you find in best condition / price, no matter if Wetzlar/Canada or mount (some slightly more rare versions do have convertible mounts, and many people seem t pay more for Wetzlar versions, despite being technically identical).

Link to post
Share on other sites

I have the same rigid summicron 50- same year 1969. It is one of my favourite lenses and the first I ever got. Small, sharp, fast, excellent build. I also have many of the pre-asph summicron 35's and agree that V1 8 element would be the best match- though it is the earlier lens. It has that razor sharp quality.

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

 I have had the ASPH (sold it because I like the rendering of the v.4 better) and Summaron (sold it because the infinity lock drove me nuts and I didn't want to butcher it). 

 

All it takes is a toothpick to override the infinity lock - the 35mm Summaron is unique in its rendering. Worth hanging on to.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...