jdeed1 Posted November 15, 2008 Author Share #21 Posted November 15, 2008 Advertisement (gone after registration) Shootist - completely agree with you on this. John - I don't think there's anything new here - they're all known issues. And actually - isn't it much more important to be getting exposure right and to be framing in ways which give some coherence to the image than worrying about a filter reflection ... Chris, I hear what you say but by the time these shots were taken I had become trigger happy desperately trying to find settings that would not reproduce the offending colouring. The shots were posted to show the problem not as exhibits from a portfolio! With my M8 I had no problems at all with outdoor shots at night and only 2 or 3 green blob reflections with indoor shots. Is it the case that some sensors are more susceptible to this phenomenon? From what you and Shootist say it is something I have to accept which is something I must say I am reluctant to do John Link to post Share on other sites More sharing options...
Advertisement Posted November 15, 2008 Posted November 15, 2008 Hi jdeed1, Take a look here M8.2 failure. I'm sure you'll find what you were looking for!
Guest s.m.e.p. Posted November 15, 2008 Share #22 Posted November 15, 2008 What brand of point and shoot digital did this come from:confused: Looks like a cellular phone cam. Link to post Share on other sites More sharing options...
Guest Posted November 15, 2008 Share #23 Posted November 15, 2008 I may be on a downer with Leica at the moment (for reasons I will not repeat) but the shambles - the dismal quality control of both new and upgraded cameras - continues. Leica's are masters of making lenses but their cameras continue to disappoint. I think they should get out of the camera manufacturing business and entrust it instead to a world class electronics company. I will probably buy an M9 with full size sensor, assuming it is ever made and the price managable.If to keep the cost in control the camera was sourced via Panasonic for example and made in a low cost labour country I would have no problem in the camera not saying "made in Germany". Brian Link to post Share on other sites More sharing options...
epand56 Posted November 15, 2008 Share #24 Posted November 15, 2008 Here is the green stripe again (lower right corner on her arm). This shot has been taken with the filter on. I had sometimes problems with green stripes and reflection in dim light with strong lamplights or candles, but i've always solved them by taking away the filter. Generally green or magenta spots are generated by strong light sources in dark or night environments. Link to post Share on other sites More sharing options...
Guest s.m.e.p. Posted November 15, 2008 Share #25 Posted November 15, 2008 This shot has been taken with the filter on. I had sometimes problems with green stripes and reflection in dim light with strong lamplights or candles, but i've always solved them by taking away the filter. Generally green or magenta spots are generated by strong light sources in dark or night environments. So you have to decide between magenta black and green reflections? Link to post Share on other sites More sharing options...
epand56 Posted November 15, 2008 Share #26 Posted November 15, 2008 So you have to decide between magenta black and green reflections? No, I mean that i only had those kind of reflexes or green bars in determinated circumstances and just because of the filter. Here you are another example: The first one with filter on the second with filter off. In the second picture the candles reflex is gone. Both taken at the same time. Keep in mind that I did not work on these picture, alas the colours. Link to post Share on other sites More sharing options...
wattsy Posted November 15, 2008 Share #27 Posted November 15, 2008 Advertisement (gone after registration) So you have to decide between magenta black and green reflections? In short, yes. (Although you will get many in this forum bleat on about how, with the availability of the filters, the sensitivity to IR has become a non-issue.) Link to post Share on other sites More sharing options...
wattsy Posted November 15, 2008 Share #28 Posted November 15, 2008 And actually - isn't it much more important to be getting exposure right and to be framing in ways which give some coherence to the image than worrying about a filter reflection ... I think you should be careful in offering smug advice about framing, exposure, composition, etc. Glass houses and all that.. Link to post Share on other sites More sharing options...
Guest s.m.e.p. Posted November 15, 2008 Share #29 Posted November 15, 2008 No, I mean that i only had those kind of reflexes or green bars in determinated circumstances and just because of the filter. Here you are another example: The first one with filter on the second with filter off. In the second picture the candles reflex is gone. Both taken at the same time. Keep in mind that I did not work on these picture, alas the colours. Exactly what i feared: Reflections or ugly (skin-) colors. :( Link to post Share on other sites More sharing options...
jdeed1 Posted November 15, 2008 Author Share #30 Posted November 15, 2008 I find this whole green/red blob line band issue confusing.On the one hand some say this is a sensor /filter issue common to all M8's whereas others eg Jaap- see his earlier post- have never seen this problem. Which is it? It cannot be both unless those that have never seen the problem never shoot in low light with bright external light sources!. Whilst I understand and accept the reflection issue, in so far as the line / banding problem is concerned logic says it must affect only some sensors and if so these sensors can be described as defective. John Link to post Share on other sites More sharing options...
Guest s.m.e.p. Posted November 15, 2008 Share #31 Posted November 15, 2008 I find this whole green/red blob line band issue confusing.On the one hand some say this is a sensor /filter issue common to all M8's whereas others eg Jaap- see his earlier post- have never seen this problem. Which is it? It cannot be both unless those that have never seen the problem never shoot in low light with bright external light sources!. Whilst I understand and accept the reflection issue, in so far as the line / banding problem is concerned logic says it must affect only some sensors and if so these sensors can be described as defective.John All Digital Ms have the sensor /filter issue. But if you are a hardcore LEICA-Fanboy you won´t see it or at least don´t talk about it in the L•Camera Forum. Link to post Share on other sites More sharing options...
Adrian Lord Posted November 15, 2008 Share #32 Posted November 15, 2008 These problems are simply outrageous, aren't they? How can they sell something so defective at such a premium? Link to post Share on other sites More sharing options...
dcoombs Posted November 15, 2008 Share #33 Posted November 15, 2008 I find this whole green/red blob line band issue confusing.On the one hand some say this is a sensor /filter issue common to all M8's whereas others eg Jaap- see his earlier post- have never seen this problem. Which is it? It cannot be both unless those that have never seen the problem never shoot in low light with bright external light sources!. Whilst I understand and accept the reflection issue, in so far as the line / banding problem is concerned logic says it must affect only some sensors and if so these sensors can be described as defective.John You got it in one. The "hot" pixels (red spots) and vertical banding (especially at high ISO) are defects in the sensor. This is exceptional, not "common to all M8's". I started to experience them only after having my M8 for almost two years. I sent it to Solms where they swapped out the sensor for a new one and returned it, all under warranty. No questions asked. Doug Link to post Share on other sites More sharing options...
jdeed1 Posted November 15, 2008 Author Share #34 Posted November 15, 2008 All Digital Ms have the sensor /filter issue. But if you are a hardcore LEICA-Fanboy you won´t see it or at least don´t talk about it in the L•Camera Forum. So little point in demanding a new camera when this problem manifests itself only to receive the response that there is no problem, the camera is behaving normally!! John Link to post Share on other sites More sharing options...
peterv Posted November 15, 2008 Share #35 Posted November 15, 2008 If to keep the cost in control the camera was sourced via Panasonic for example and made in a low cost labour country I would have no problem in the camera not saying "made in Germany".Brian Yeah, why would you want your photographic equipment to be manufactured by people who work only 8 hours a day, expensive professionals who have health insurance, pension, good education for their children, etc? Peter Link to post Share on other sites More sharing options...
epand56 Posted November 15, 2008 Share #36 Posted November 15, 2008 Exactly what i feared: Reflections or ugly (skin-) colors. :( Well, this picture arrived here just as it was shot. Skin tones can be fixed perfectly in any application such as Lightroom or similar. I meant that the only problem I had were from light sources and mediated by the filter. I often noticed that shooting without the filter is very ok. Indeed this is a problem, but nevertheless I love this camera and enjoy any moment spent using it. Yes I'm one of those hardcore Leica-fanboys... :D Link to post Share on other sites More sharing options...
marknorton Posted November 15, 2008 Share #37 Posted November 15, 2008 Exactly what i feared: Reflections or ugly (skin-) colors. :( I'm pleased to tell you you would have no such problems with a Nikon D3 or D700 and their professional glass; the 28/1.4 is ideal for this type of shot. True, the Nikon may be slightly intimidating, but fiddling around removing filters is hardly great for capturing the moment. You can have all the resolution and "glow" in the world, but it's pretty pointless if there are defects like these. Link to post Share on other sites More sharing options...
Guest s.m.e.p. Posted November 15, 2008 Share #38 Posted November 15, 2008 I'm pleased to tell you you would have no such problems with a Nikon D3 or D700 and their professional glass; the 28/1.4 is ideal for this type of shot. I know, Mark. I use a D300 and a D3. The 28/1.4 is out of production and I hope that NIKON announces a new 28/1.4 or 35/1.4 soon. Link to post Share on other sites More sharing options...
Vieri Posted November 15, 2008 Share #39 Posted November 15, 2008 ... And actually - isn't it much more important to be getting exposure right and to be framing in ways which give some coherence to the image than worrying about a filter reflection ... Indeed it is, Chris, but say one did all that and got his or her picture ruined by said reflections... shouldn't this be something we all be vocal about, and shouldn't this be something Leica will provide a (free) solution for? It seems to me that the forum got - as far as some of the "old issues" are concerned - into a state of letargical acceptance: something like, "oh yeah, that's a know issue, just live with it" which frankly sounds quite amazing to me. Old, new, known, unknown, whichever issue it is, if Leica is willing to keep calling themselves a serious, an honorable camera maker it should - it must - be fixed. M8.2 shipping with the same sensor flaws as the M8 is, IMHO, unacceptable. Not just because the camera costs as much as it does, as someone says - all known issues must be fixed regardless of cost, of what is needed, and so on. And, not just in a perfect world, as someone else would say: in this world as well. More, for those who'd say that one "knew before buying" or "should have done its homework" before buying, to me it's still very reasonable to expect that a manufacture available of issues with his product will work to fix them. If a manufacturer knowing about any product issues just keeps selling it regardless, then its behavior is boarding to fraud IMHO. Just my .02. Link to post Share on other sites More sharing options...
Shootist Posted November 15, 2008 Share #40 Posted November 15, 2008 The green band? It never happened to me in two years and two bodies, over 16000 shots, so I think it is definitely camera-related. Whether or not it has happen to you doesn't really count. It is common with all Leica M8's with the right scenario. Here are 2 shots I just took. First is with my chrome M8 which is a replacement camera for my first chrome M8 that took the first shot I posted with the green line/band in it and the second which again is a replacement camera for my original black M8 that I received in September of this year and has since had the sensor replaced. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! It seems to only occure on the sides, short sides, of the sensor. This is totally reproducible wioth any M8. Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! It seems to only occure on the sides, short sides, of the sensor. This is totally reproducible wioth any M8. ' data-webShareUrl='https://www.l-camera-forum.com/topic/68490-m82-failure/?do=findComment&comment=716420'>More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.