Lens detection auto grayed-out with wate - normal?

[Giulio Zanni]

Advertisement (gone after registration)

Dear friends,

is not normal that the auto setting of the lens detection is grayed-out with wate?

Thank you, Giulio 

[jaapv]

Quite possible as the WATE only registers as a 16 mm lens. The other focal lengths are not transmitted. 

[lct]

It should not but mine is grayed-out too. I did not notice it until this thread. It should do no harm if your lens is recognized as a WATE. You may wish to make sure that the lens selected is "4/16mm".

[Giulio Zanni]

5 hours ago, lct said:

It should not but mine is grayed-out too. I did not notice it until this thread. It should do no harm if your lens is recognized as a WATE. You may wish to make sure that the lens selected is "4/16mm".

Thank you. Yes the lens is recognised as a 4/16 but in mamual mode it gives me the option of selecting all three focal lenghts. However, I am not sure whether it can actually selects all three focal lenghts as the lens is still recognised as a 16. Anyway, I just wanted to make sure that the exclusion of the auto recognition is a normal behaviour with the wate.

Best, Giulio

[lct]

Sounds more like a bug if you ask me but your camera does not look different to mine at least.

[davidmknoble]

If I remember correctly, the lens is recognized, but because there is no rangefinder linkage for the focal lengths, you still choose which focal length you are using if you want it in EXIF.  I think (but will have to test) that if you don’t choose anything, the lens is still recorded in EXIF, but not the focal length.

 

[lct]

Advertisement (gone after registration)

If you don't choose anything the lens is recorded in EXIF as a 16/4 lens if it is coded as such (010000). Same when pen coding a CV 15/4.5 the same way for instance.