Q3 new firmware 2.0.5

[Bryan Goh]

Advertisement (gone after registration)

10 hours ago, SLamb said:

This is rather strange. I started a thread about the EVF flashing when set to 120Hz and that setting it to 60Hz resolved the issue. I tested again on the new firmware and I noted that the flashing had now stopped when 120Hz is selected. It's strange that you are experiencing the flashing EVF on the new firmware.

Still flashing at 120hz for me when stopped down. 

[Advertisement]

The Leica Q3 is available for pre-order at B&H Photo Video and Adorama

[Bryan Goh]

Not sure if firmware related, but I'm no longer able to connect to the FOTOS app. I believe my wireless chip in the camera has died, tried everything on multiple devices including connecting the cable to establish initial connection before the auto bluetooth pairing starts and fails.

Might send it in before the warranty is up, dont use the FOTOS app very often. 

[SLamb]

48 minutes ago, Bryan Goh said:

Still flashing at 120hz for me when stopped down. 

I stand corrected. Mine is also still flashing at 120Hz. 

[menbow]

The original factory has corrected the file naming

[DanG]

I faced another problem after the new firmware update. I updated my Q3 via the Leica PHOTOS app last night. I went on a trip the other day and when I turned on the camera I found that it no longer focused automatically or manually. Has this happened to anyone else? Maybe someone has a solution? Once again, the program does not allow me to update again, it says that such a version is already installed. Also, the camera often hangs and asks to turn it off and on again.

[Le Chef]

I would check the lens itself:

Is the focus lock on, so you cannot physically move the focus ring?

Has the lens gone partially into macro mode without you realizing?

[DanG]

Advertisement (gone after registration)

Focus does not work in manual or automatic mode. Also doesn't work in macro mode either.

[DanG]

In manual mode the lens does not focus when the focus ring is rotated.

[jaapv]

Maybe reset to factory settings? 

[DanG]

Reset to factory settings does not help. Also, the camera often asks to be turned off and on again.

[Le Chef]

Try a different memory card.

[luetz]

10 hours ago, DanG said:

Reset to factory settings does not help. Also, the camera often asks to be turned off and on again.

Hit the Menu button and read back all the settings while your experiencing these problems...this might point to the problem.

[student]

I finally built up enough courage to update with the relabelled version on Leica website. Bit of an anticlimax to report. Proceeded as follows:

1. Downloaded the software from Leica website to Macbook
2. Connected the Q3 to Macbook via USB
3. Transferred all images on the SD card to Macbook via USB
4. Transferred the software from Macbook to the SD card inside the Q3
5. Disconnected the Q3 from the Macbook
6. Shut down the Q3
7. Restarted the Q3 and chose the software upgrade option. 
8. And now the new software is functioning in the Q3

No glitches at all. (The SD card I have been using is the one I purchased with the Q3. It is a "Lexar Professional 300MB/s read and 260MB/s write, 2000x SDXC UHS-II 128GB". I carry a new spare one (64GB) in case the present one ever malfunctions.

(PS: I have not checked the one user profile I had in the camera. Photography is a leisure time activity for me and in case the one profile is missing, I could recreate it in a couple of minutes.)

[petercomeau]

Just downloaded 2.05 and updated after copying it to my SD card using an Apple MacBook. No problems here. 

[Michele Belloni]

I have noticed a huge improvement in battery lasting... if before the latest firmware I reached 2 hours of intense wedding photography work, now I go for full five hours of continuous shooting. Thanks Leica. I hope to see same things on my SL3 too very soon.

[sugsug]

On 9/3/2024 at 1:40 PM, Michele Belloni said:

I have noticed a huge improvement in battery lasting... if before the latest firmware I reached 2 hours of intense wedding photography work, now I go for full five hours of continuous shooting. Thanks Leica. I hope to see same things on my SL3 too very soon.

Is this real? Because mine is still the same.

[SLamb]

I just read that there is a new firmware update for the one week old Q3 43 which includes the 'Implementation of a protective function to prevent the possible overwriting of existing shots'.

If that's true it's unbelievable that the camera was released to the market with the same major issue that had already been fixed in the Q3. 

Stupidity or laziness?  Take your pick, but really unacceptable. 

[SrMi]

34 minutes ago, SLamb said:

I just read that there is a new firmware update for the one week old Q3 43 which includes the 'Implementation of a protective function to prevent the possible overwriting of existing shots'.

If that's true it's unbelievable that the camera was released to the market with the same major issue that had already been fixed in the Q3. 

Stupidity or laziness?  Take your pick, but really unacceptable. 

There is no stupid laziness, but it is a typical software development process. The firmware was likely finalized before the launch and before the bug was reported. The fix for the recently discovered bug (never reported on Q) was worked in parallel while the launch was ongoing. The fact that the fix was launched a day or two after the launch speaks in Leica's favor.

[Advertisement]

Hallo,

Look here: Leica Q

[Carrot]

Picked up my Q43 yesterday and it was already loaded with version 2.0.5

[M11 for me]

vor 43 Minuten schrieb Carrot:

Picked up my Q43 yesterday and it was already loaded with version 2.0.5

Very good. Nothing to worry then.