Kiwimac Posted September 4, 2023 Share #41 Posted September 4, 2023 (edited) Advertisement (gone after registration) 15 hours ago, LocalHero1953 said: I saw that former lens of yours for sale a few years ago. It was like looking through a frosted window.😉 I have never seen a mark on one of my lenses from doing that. Mind you they were mostly Nikon so perhaps they're more robust...! Every one of them was sold to a dealer who paid Grade 10 prices for them too. Edited September 4, 2023 by Kiwimac 1 Link to post Share on other sites More sharing options...
Advertisement Posted September 4, 2023 Posted September 4, 2023 Hi Kiwimac, Take a look here What's the point of M11 being weather resistant, if M-lenses are not?. I'm sure you'll find what you were looking for!
ELAN Posted September 4, 2023 Share #42 Posted September 4, 2023 (edited) I've walked in the rain with all my M cameras and never a problem. Sprayed with sea water and splashed by cars running over puddles. Recently I bought a new M10-R and went shooting a lively demonstration. Camera was hit directly with a police water cannon (three times!) and kept on shooting fine. Not a drop entered the camera or lens. I don't recommend it though. Edited September 4, 2023 by ELAN 2 Link to post Share on other sites More sharing options...
Kiwimac Posted September 6, 2023 Share #43 Posted September 6, 2023 On 9/4/2023 at 10:36 PM, ELAN said: I've walked in the rain with all my M cameras and never a problem. Sprayed with sea water and splashed by cars running over puddles. Recently I bought a new M10-R and went shooting a lively demonstration. Camera was hit directly with a police water cannon (three times!) and kept on shooting fine. Not a drop entered the camera or lens. I don't recommend it though. That’s certainly “lively”!! I don’t think the NZ police even own a water cannon. 1 Link to post Share on other sites More sharing options...
kivis Posted October 24, 2023 Share #44 Posted October 24, 2023 On 8/29/2023 at 4:45 PM, Bitbooll said: Probably, I was misled by the following info found on https://cameradecision.com/: "Leica M11 has environmental sealings on its body which makes it a weather resistant camera" (https://tinyurl.com/2xaydjx2), and "Dust- and splash-resistant build" on https://au.pcmag.com/ (https://tinyurl.com/2p9ahv5m). Considering these sources are quite reputable, I thought I could trust them. Did they lie? What's the point of lying? Now I am confused even more. I read this somewhere that even the M (type 240) has weather resistant seals. Anybody heard this? Link to post Share on other sites More sharing options...
jaapv Posted October 24, 2023 Share #45 Posted October 24, 2023 It is stated in this thread. Link to post Share on other sites More sharing options...
Ronazle Posted November 9, 2023 Share #46 Posted November 9, 2023 Some years ago I shot photos of an outdoor family wedding on a Jamaican beach with a M8 and M (type 240). I did my best to wipe off both cameras and lenses as often as possible and practical but they were subjected to a lot of rain and wind but never showed any real ill effects much to my surprise. Regards, Ron Link to post Share on other sites More sharing options...
Salvapost Posted August 14, 2024 Share #47 Posted August 14, 2024 Advertisement (gone after registration) On 8/29/2023 at 1:32 PM, MyLeicaWorld said: We had an issue when we were in Vietnam. It was a very humid weather .. We were staying at a hotel, and we go out for shooting ..When we go out my Leica M 11’s lens got foggy and also my wife’s Leica CL’s lens got foggy too.. we tried to wipe out the fog (humid) but it didn’t work out. Then we went back to the hotel’s air conditioned lobby; after staying there for a few minutes we go out again, and the fog was gone.. the fog (humid) was not at the lens’s filter surface.. it was somewhere inside the lens .. When a camera lens experiences a sudden change in temperature, such as moving from a cold outdoor environment to a warm indoor space like a cabin, it is common for condensation to form on the lens. This happens because the cold glass of the lens meets the warmer, more humid air inside, causing moisture in the air to condense on the cooler surface of the lens. This phenomenon is normal and can occur with all lenses, regardless of their make or quality. The temperature difference between the cold lens and the warm air creates conditions conducive to condensation. It’s similar to what happens when you wear glasses and walk into a warm room on a cold day – the lenses fog up. To prevent or minimize this effect, you can allow the camera and lens to gradually acclimate to the new temperature. For example, keeping your gear in a sealed plastic bag while it warms up can help reduce condensation, as the moisture will condense on the outside of the bag instead of the lens. 1 Link to post Share on other sites More sharing options...
adan Posted August 16, 2024 Share #48 Posted August 16, 2024 Looks like it's time to post these pix of my M8 and M9 cameras again. Neither one had any problems afterwards (I did have to clean the white-wash spatter off the outside of the M8). Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 5 1 Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/381394-whats-the-point-of-m11-being-weather-resistant-if-m-lenses-are-not/?do=findComment&comment=5483158'>More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now