-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By lookbook
man with angel hair : )
Hello guest! Please register or sign in to view the hidden content. Hallo Gast! Du willst die Bilder sehen? Einfach registrieren oder anmelden!
leica 246 monchrom | summilux asph. 50mm -
By loading
Hello everybody,
I need some advice regarding repairing/CLA of an M6.
The camera seems to have shutter capping (It might be partially my fault since I took out the camera at -7 degrees Celsius a whole day, however, after that, I shoot a roll in a normal temperature environment -my house- and everything was fine, all the images were fine)
So... these are my questions:
1. Do I sent the camera to Leica Camera without prior notice? I mean, do I ship it with DHL and that's it?
I'm asking this because on their service page they do not specify all the types of Leicas they are repairing. I'm assuming M6 is one of them but it's better to play it safe.
2. I want my problem to be fixed and also I want a full CLA (I've noticed some gunk on the winding gears and the low exposure times are not quite accurate). Should I specify the CLA part in the attached document or the CLA of a camera comes by default with the
repairing process?
3. Please don't laugh on this one but the camera will be sent to: Leica Camera AG, Am Leitz-Park 5, Wetzlar, Germany? I'm asking that just to be sure that I'm sending the camera to the right address.
I realize the questions are a little bit odd but I never sent a camera for a CLA (I usually shoot with two EOS3 cameras-never had a problem).
I bought recently this Leica from Ebay and I want to make it "as new" before I start shooting with it intensively.
Thanks in advance for the answers
Cheers
L.
-
By jivekp@gmail.com
Hi everyone, I'm a new Leica user and bought an M6 Classic with a Leitz Summicron 2.0. The first roll came back blurry and I thought it was my shooting..then the second and third and so on. I sent my lens in to Keh (where I had gotten it) to be serviced and it came back with the same results. The images are generally overexposed when in very sunny conditions and all of them are very softly focused. I shot most of a roll at f16 and not one thing was in focus. I don't think it could be the lens, as it just came back from being properly adjusted so I'm wondering if it could be the body? I'm not sure what to do as I've spent my budget on this setup. I was going to send it in to get the VF upgrade because I was experiencing some flaring but that is not what is happening here. Any tips very much appreciated.
-
By wda
I am looking for an L-Bracket, with Arca Swiss compatibility, for use with my Leica CL camera. Occasionally it will be used with tele-zoom lenses, but mostly with smaller lenses.
There are a few threads on this subject in the forum, dealing specifically with bigger cameras, but none that I could find relevant to the CL. Googling brings up a lot of brand-specific solutions; a few claim to be universal. I would welcome any reports from members of this forum, of user experience with such a device, and recommendations. Thank you.
-
By Holger1
Von der LEICA Homepage: "Für unseren Hauptsitz in Wetzlar suchen wir Sie als: Auszubildender zum Fachinformatiker für Systemintegration (m/w/d)
Ihre Aufgaben: Kennenlernen der komplexen Leica IT-Infrastruktur sowie der verschiedenen Teams und Funktionen,
Schwerpunktmäßig im Bereich IT-Services (national/international) Unterstützung der Kollegen bei der Erhebung von IT-Anforderungen aus den Fachbereichen sowie bei der anschließenden Planung, Installation, Konfiguration und Bereitstellung von IT-Systemen Beratung und Betreuung der Leica Mitarbeiter/-innen in allen Anwenderfragen rund um Hard- und Software Durchführung der Fehleranalyse und -behebung als vollwertiges Teammitglied an unserem Service Desk Kennenlernen der Anwenderperspektive durch Einsätze in anderen Fachbereichen, z.B. Vertrieb, Einkauf, Logistik, Produktion, Buchhaltung, etc. Mitarbeit in IT-Projekten, Teilnahme an Schulungen und Workshops Sicherstellung von IT-Security Richtlinien Teilnahme am Berufsschulunterricht sowie Durchführung einer Projektarbeit zur Vorbereitung auf die Abschlussprüfung Nach erfolgreichem Abschluss Übernahme als Junior IT-Service Mitarbeiter/-in mit vielfältigen Entwicklungsperspektiven
Ihr Profil: (Fach-) Abitur oder guter Mittlerer Schulabschluss mit guten Noten in Mathematik und den naturwissenschaftlichen Fächern Erste Erfahrungen wünschenswert, z. B. durch ein Schülerpraktikum im IT-Umfeld Sicherer Umgang mit MS-Office Begeisterung für IT-Themen, Lernbereitschaft und hohes Technikverständnis sind ein Muss Gute Englischkenntnisse sind ein großes Plus, da wir auch die internationalen Leica-Tochtergesellschaften mit betreuen Selbstsicheres, gepflegtes und freundliches Auftreten Spaß am täglichen Umgang mit unseren Anwendern Freude an der Arbeit im Team, Verlässlichkeit und Lösungsorientierung" Eintrittsdatum:
01.08.2021
-