SrMi Posted September 24, 2020 Share #1 Posted September 24, 2020 Advertisement (gone after registration) https://www.photonstophotos.net/Charts/PDR.htm#Leica S3 Link to post Share on other sites More sharing options...
Advertisement Posted September 24, 2020 Posted September 24, 2020 Hi SrMi, Take a look here Leica S3 PDR on PhotonsToPhotos. I'm sure you'll find what you were looking for!
John McMaster Posted September 24, 2020 Share #2 Posted September 24, 2020 Hmm, says that the S3 has less dynamic range than the S(007)..... john Link to post Share on other sites More sharing options...
SrMi Posted September 24, 2020 Author Share #3 Posted September 24, 2020 (edited) 10 minutes ago, John McMaster said: Hmm, says that the S3 has less dynamic range than the S(007)..... john The difference is too small to be relevant, IMO. I would say the measured PDR is about the same. It is better than SL2 except for SL2's ISO50, which comes with its own set of issues. Edited September 24, 2020 by SrMi Link to post Share on other sites More sharing options...
scott kirkpatrick Posted September 24, 2020 Share #4 Posted September 24, 2020 Here's the comparison of S3 to SL2 to M10-R. I shows that the M10-R is benefiting from the chip technology advances that went into the S3. They are very close. In the SL2 and M10-R charts, note the effect of the dual-range support (extra amplification kicks in around ISO 400). Link to post Share on other sites More sharing options...
SrMi Posted September 24, 2020 Author Share #5 Posted September 24, 2020 It would have been nice if Leica used dual gain ISO in M10-R and S3. 1 Link to post Share on other sites More sharing options...
Chaemono Posted September 24, 2020 Share #6 Posted September 24, 2020 Do you mean dual native ISO? Gain amplification is not needed for the higher native ISO. See 1:14 here: https://www.youtube.com/watch?v=nJYZfRftaXk Link to post Share on other sites More sharing options...
SrMi Posted September 24, 2020 Author Share #7 Posted September 24, 2020 Advertisement (gone after registration) 18 minutes ago, Chaemono said: Do you mean dual native ISO? Gain amplification is not needed for the higher native ISO. See 1:14 here: https://www.youtube.com/watch?v=nJYZfRftaXk Yes, dual native ISO, dual base ISO, dual gain, Aptina's dual-conversion gain, all the same, AFAIK. Link to post Share on other sites More sharing options...
John Smith Posted September 25, 2020 Share #8 Posted September 25, 2020 20 hours ago, scott kirkpatrick said: Here's the comparison of S3 to SL2 to M10-R. I shows that the M10-R is benefiting from the chip technology advances that went into the S3. They are very close. In the SL2 and M10-R charts, note the effect of the dual-range support (extra amplification kicks in around ISO 400). Or is it the other way around, the S3 benefitting from the chip technology that went into the M10M and M10R? Is it that full frame has caught up to medium format? Link to post Share on other sites More sharing options...
Jeff S Posted September 25, 2020 Share #9 Posted September 25, 2020 20 hours ago, SrMi said: It would have been nice if Leica used dual gain ISO in M10-R and S3. Leica does use dual gain architecture in the S3, M10 Monochrom and M10-R. This has been made clear by Stefan Daniel, and repeated both in print and in video by David Farkas. Jeff 1 Link to post Share on other sites More sharing options...
SrMi Posted September 25, 2020 Author Share #10 Posted September 25, 2020 3 minutes ago, Jeff S said: Leica does use dual gain architecture in the S3, M10 Monochrom and M10-R. This has been made clear by Stefan Daniel, and repeated both in print and in video by David Farkas. Jeff Yes, you are right. M10-R has two base ISOs, one at 126 and one at 400. S3 has one at 100 and one somewhere around 800. The gain change seems to be relatively small, though. Link to post Share on other sites More sharing options...
helged Posted September 25, 2020 Share #11 Posted September 25, 2020 19 minutes ago, John Smith said: Or is it the other way around, the S3 benefitting from the chip technology that went into the M10M and M10R? Is it that full frame has caught up to medium format? Since only Leica uses 30x45mm sensor, the S3, M10-R, M10M triple shares a unique sensor due to S3. As was the case for S007, M240, etc. 1 Link to post Share on other sites More sharing options...
Jeff S Posted September 25, 2020 Share #12 Posted September 25, 2020 19 minutes ago, helged said: Since only Leica uses 30x45mm sensor, the S3, M10-R, M10M triple shares a unique sensor due to S3. As was the case for S007, M240, etc. Indeed... only way for S sensor to be economically feasible. These types of economies are necessary, whether created within the same company or across-company partnerships, as Nicci has discussed elsewhere. Jeff Link to post Share on other sites More sharing options...
John Smith Posted September 25, 2020 Share #13 Posted September 25, 2020 (edited) 1 hour ago, helged said: Since only Leica uses 30x45mm sensor, the S3, M10-R, M10M triple shares a unique sensor due to S3. As was the case for S007, M240, etc. Due to the S3? I'm suggesting it was the other way around, more trickle up technology than trickle down. The M system is the core product of the company. It looks as if the S3 benefitted from the drive to create state-of-the-art sensors for the Ms. Hence a new Pro Format sensor in a 2015 body. In any case, it is interesting to see how the M has become such a powerhouse of megapixels. Edited September 25, 2020 by John Smith Link to post Share on other sites More sharing options...
SrMi Posted September 25, 2020 Author Share #14 Posted September 25, 2020 11 minutes ago, John Smith said: Due to the S3? I'm suggesting it was the other way around, more trickle up technology than trickle down. The M system is the core product of the company. It looks as if the S3 benefitted from the drive to create state-of-the-art sensors for the Ms. Hence a new Pro Format sensor in a 2015 body. In any case, it is interesting to see how the M has become such a powerhouse of megapixels. Leica announced S3 in 2018 (working demo model). I assume that it already had the current sensor. Link to post Share on other sites More sharing options...
John Smith Posted September 25, 2020 Share #15 Posted September 25, 2020 15 minutes ago, SrMi said: Leica announced S3 in 2018 (working demo model). I assume that it already had the current sensor. And it didn't have those sensors in mind for the Ms? Link to post Share on other sites More sharing options...
helged Posted September 25, 2020 Share #16 Posted September 25, 2020 30 minutes ago, John Smith said: Due to the S3? I'm suggesting it was the other way around, more trickle up technology than trickle down. The M system is the core product of the company. It looks as if the S3 benefitted from the drive to create state-of-the-art sensors for the Ms. Hence a new Pro Format sensor in a 2015 body. In any case, it is interesting to see how the M has become such a powerhouse of megapixels. As long as Leica manufactures S-bodies, the sensors follow that of the S. At least up to now (including S3). FF sensors are available from many vendors, a 30x45mm sensor needs to be exclusively manufactures by Leica. Link to post Share on other sites More sharing options...
helged Posted September 25, 2020 Share #17 Posted September 25, 2020 (edited) 3 minutes ago, John Smith said: And it didn't have those sensors in mind for the Ms? Surely. To reduced the cost of the S-sensor, it's also used by (most of) the FF-bodies. (Back to shooting... 😉). Edited September 25, 2020 by helged Link to post Share on other sites More sharing options...
John Smith Posted September 25, 2020 Share #18 Posted September 25, 2020 Just now, helged said: As long as Leica manufactures S-bodies, the sensors follow that of the S. At least up to now (including S3). FF sensors are available from many vendors, a 30x45mm sensor needs to be exclusively manufactures by Leica. I think you're wrong on this. Leica can't buy off-the-shelf sensors for the Ms. I think Stefan Daniel said so himself. If you want to think that the S3 drove the innovation for the new Ms, so be it. I think it's the other way around, at least this time. You don't have that many people buying S3s and my dealer told me that it is a limited production run. Link to post Share on other sites More sharing options...
John McMaster Posted September 25, 2020 Share #19 Posted September 25, 2020 2 hours ago, helged said: As was the case for S007, M240, etc. The S(007) sensor is far superior to the M(240) one.... john Link to post Share on other sites More sharing options...
SrMi Posted September 25, 2020 Author Share #20 Posted September 25, 2020 25 minutes ago, John Smith said: And it didn't have those sensors in mind for the Ms? Probably they did, but it seems that the new sensor technology was first tested in S3. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now