yst Posted May 2, 2019 Author Share #21  Posted May 2, 2019 Advertisement (gone after registration) 2 minutes ago, magosak said: Camera Firmware on my CL is 2.2. CL menu also shows the lens firmware which is 1.0 for my 55-135. Thank you.   Does that mean I need to update my CL to 2.2?  How to do it? Link to post Share on other sites More sharing options...
Advertisement Posted May 2, 2019 Posted May 2, 2019 Hi yst, Take a look here Just got a TL 55-135, is it normal to have noise?. I'm sure you'll find what you were looking for!
yst Posted May 2, 2019 Author Share #22  Posted May 2, 2019 It done, updated to 2.2 😃.  Is there a viable improvement between the 2.2 vs 2.1? Link to post Share on other sites More sharing options...
jaapv Posted May 2, 2019 Share #23  Posted May 2, 2019 6 hours ago, yst said: Thank you.  The camera information showing:  Firmware 2.1 is that up to date already?  And how to "if needed updating the lens firmware"?   That is an automatic process without user input. For camera firmware updates visit Leica’s website. 1 Link to post Share on other sites More sharing options...
Dave in Wales Posted May 3, 2019 Share #24  Posted May 3, 2019 (edited) Came across this on page 12.... And this on page 14....... I'm a bit concerned, I've got a new one being delivered today  Edited May 3, 2019 by Dave in Wales Link to post Share on other sites More sharing options...
Marac Posted May 3, 2019 Share #25 Â Posted May 3, 2019 Welcome to Leica Dave, hit and miss. I have not had any issue with new lenses but several M camera bodies have had to go back for various reasons, mainly sensor issues. When you get your 55-135, enjoy it, do not look for faults. (touch wood) I have not had a single issue with my CL system, lenses or body. Link to post Share on other sites More sharing options...
jaapv Posted May 3, 2019 Share #26  Posted May 3, 2019 2 hours ago, Dave in Wales said: Came across this on page 12.... And this on page 14....... I'm a bit concerned, I've got a new one being delivered today  An Internet Forum is a honeypot for problems. It is rare for it to reflect the real-life frequency. 1 Link to post Share on other sites More sharing options...
Dave in Wales Posted May 3, 2019 Share #27  Posted May 3, 2019 (edited) Advertisement (gone after registration) Just took delivery of my brand spanking new 55-135, it's a beaut. Guess what.....it makes a noise much like the others have described but..........it doesn't bother me one bit. It sounds 'normal' as if it belongs, but for this thread I doubt I'd even have bothered about it. It was sealed in the grey scratch box they all come in, so it's not been handled. NOW...................lets go and take some snaps with it.  Edited May 3, 2019 by Dave in Wales Link to post Share on other sites More sharing options...
bags27 Posted May 3, 2019 Share #28 Â Posted May 3, 2019 10 hours ago, jaapv said: An Internet Forum is a honeypot for problems. It is rare for it to reflect the real-life frequency. Camera problems and medical advice: two things not to take seriously on the web. Link to post Share on other sites More sharing options...
Dave in Wales Posted May 4, 2019 Share #29  Posted May 4, 2019 On 4/30/2019 at 3:58 PM, jaapv said: I was about to give an identical answer. There is no reason why being mounted on the camera should make a difference to the zoom mechanism, which is mechanical and not connected to the mount. Go easy with me, I'm still a newbie really Is this strictly true? In 'P' and 'A' modes the shutter speed is connected to the zoom position and increases or decreases in accordance with the zoom length, there's clever Link to post Share on other sites More sharing options...
jaapv Posted May 4, 2019 Share #30 Â Posted May 4, 2019 The shutterspeed changes because the max. aperture is variable due to the optical construction. Stop down to a fixed aperture and it will remain the same. Link to post Share on other sites More sharing options...
Rac1ngsnak3 Posted July 16, 2020 Share #31  Posted July 16, 2020 I recently received a used TL 55-135 lens from a reputable Leica dealer (Leica Lisse). After attaching the lens to my TL2 and turning on the camera I noticed a subtle noise/vibration when turning the zoom ring. The noise sounds and feels like a cyclical whir or pulse (similar to when the camera is focusing continuously). The phenomenon only happens while turning the zoom ring and the camera is on. It is absent when the camera is off/sleep. The zoom ring and manual focus ring both have smooth action. The lens focuses appropriately and takes sharp photos. The condition of the lens is excellent (no dents, scratches, or wear). Here’s a video that demonstrates this phenomenon: Is this normal operation? Link to post Share on other sites More sharing options...
Linus84 Posted July 16, 2020 Share #32  Posted July 16, 2020 (edited) 1 hour ago, Rac1ngsnak3 said: I recently received a used TL 55-135 lens from a reputable Leica dealer (Leica Lisse). After attaching the lens to my TL2 and turning on the camera I noticed a subtle noise/vibration when turning the zoom ring. The noise sounds and feels like a cyclical whir or pulse (similar to when the camera is focusing continuously). The phenomenon only happens while turning the zoom ring and the camera is on. It is absent when the camera is off/sleep. The zoom ring and manual focus ring both have smooth action. The lens focuses appropriately and takes sharp photos. The condition of the lens is excellent (no dents, scratches, or wear). Here’s a video that demonstrates this phenomenon: Is this normal operation? Mine does exactly the same, bought new from Leica Stockholm.  Never had any problems with the lens or photos from it.   I can add that the 18-56 sounds similar, though much less intense.  regards //Linus Edited July 16, 2020 by Linus84 1 Link to post Share on other sites More sharing options...
jaapv Posted July 17, 2020 Share #33  Posted July 17, 2020 19 hours ago, Rac1ngsnak3 said: I recently received a used TL 55-135 lens from a reputable Leica dealer (Leica Lisse). After attaching the lens to my TL2 and turning on the camera I noticed a subtle noise/vibration when turning the zoom ring. The noise sounds and feels like a cyclical whir or pulse (similar to when the camera is focusing continuously). The phenomenon only happens while turning the zoom ring and the camera is on. It is absent when the camera is off/sleep. The zoom ring and manual focus ring both have smooth action. The lens focuses appropriately and takes sharp photos. The condition of the lens is excellent (no dents, scratches, or wear). Here’s a video that demonstrates this phenomenon: Is this normal operation? If my lens made a creaking sound like that it would have been returned on the spot. Unacceptable. Both my 18-56 and 55-135 make a faint swishing sound, nothing more. Link to post Share on other sites More sharing options...
Rac1ngsnak3 Posted July 17, 2020 Share #34  Posted July 17, 2020 Leica Repair responded and said that this noise is not normal and to send it in for repair. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/296763-just-got-a-tl-55-135-is-it-normal-to-have-noise/?do=findComment&comment=4010198'>More sharing options...
Linus84 Posted July 17, 2020 Share #35  Posted July 17, 2020 Well, tell us how it goes! It’s hard to judge sound level over a recording like this, but mine is quite similar in operation. And only when the camera is turned on.  The same phenomenon on both the CL and the T. Link to post Share on other sites More sharing options...
jaapv Posted July 17, 2020 Share #36 Â Posted July 17, 2020 IMG_1035.mov Link to post Share on other sites More sharing options...
jaapv Posted July 17, 2020 Share #37 Â Posted July 17, 2020 Sorry for the atrocious quality - just an iPhone grab in bad light etc... It's about the (lack of) noise anyway. The lens was mounted and the camera switched on. 1 Link to post Share on other sites More sharing options...
Le Chef Posted July 18, 2020 Share #38 Â Posted July 18, 2020 I had something similar in a 55-135 I borrowed early this year. It felt like the zoom ring was grinding as well as producing a noise. For that and other reasons I rejected it. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now