mp58 Posted February 22, 2018 Share #1 Posted February 22, 2018 Advertisement (gone after registration) I've noticed when using exposure compensation with the M10, often when i review photograph I've just taken on the screen, the exposure compensation information reads back incorrectly. If set at zero compensation (doesn't matter if it's set via the menu or with the thumb wheel), the screen will show it correctly. If I set the exposure compensation to -0.3 or -0.7 (or +0.3, etc.), it will occasionally read correctly when I review the image, but most often it shows up on the screen as -3.0. Is anyone else experiencing this oddness? I am using the latest firmware, fwiw. I have searched the forum for any notes on this, but if I have missed something from others about this issue, apologies in advance. -kim Link to post Share on other sites More sharing options...
Advertisement Posted February 22, 2018 Posted February 22, 2018 Hi mp58, Take a look here Exposure Compensation and Image Review bug in M10?. I'm sure you'll find what you were looking for!
mdemeyer Posted February 22, 2018 Share #2 Posted February 22, 2018 Yes, known and reported issue. 1 Link to post Share on other sites More sharing options...
M11 for me Posted February 22, 2018 Share #3 Posted February 22, 2018 . . . and you are right as well with your observation that occasionally the compensation value is displayed correctly. 1 Link to post Share on other sites More sharing options...
cafecacao Posted February 23, 2018 Share #4 Posted February 23, 2018 like me as the first day on hand and somethings. it seems we need new update firmware now Link to post Share on other sites More sharing options...
TG14 Posted March 1, 2018 Share #5 Posted March 1, 2018 Just frustrating for Leica to let something like this slip through testing and QA. I know bugs are inevitable in software, but surely the software in an M10 is not that complicated. Link to post Share on other sites More sharing options...
fred244 Posted March 1, 2018 Share #6 Posted March 1, 2018 Yes yes yes ! Just discovered the problem on a new to me used M10, always shows -3, returned it to the dealer, got another with a newer serial number, and . . . has the same problem ! Thought I did the SETUP wrong and sent a message to Leica, and requested M10 owner comments on dpreview. Lets hope for a software update ! Link to post Share on other sites More sharing options...
pedaes Posted March 2, 2018 Share #7 Posted March 2, 2018 Advertisement (gone after registration) Yes yes yes ! Just discovered the problem on a new to me used M10, always shows -3, returned it to the dealer, got another with a newer serial number, and . . . has the same problem ! Thought I did the SETUP wrong and sent a message to Leica, and requested M10 owner comments on dpreview. Lets hope for a software update ! Welcome to the Forum. You did well to find a dealer with two used M10's in stock. Link to post Share on other sites More sharing options...
fred244 Posted March 2, 2018 Share #8 Posted March 2, 2018 Got a response from Leica USA they are checking with Germany for when this issue will be addressed, and will post the answer here also. Used/demo M10s are and were hard to find, just got lucky the dealer, Adorama NY, had a demo listed about a month after the first one arrived. We were both in the dark about the existing problem, did a quick exchange instead of trying to repair one. Not really sure who would do the actual repair on a used item thru their 180 day warranty and the purchased extended New Leaf warranty. Wouldn't want amyone but Leica US fixing a new M model but that is probably not an option. Hopefully the solution will be in a software update and not require a trip to Leica for a fix. Link to post Share on other sites More sharing options...
albertknappmd Posted March 13, 2018 Share #9 Posted March 13, 2018 While it reads out incorrectly, did the file expose properly? Albert Link to post Share on other sites More sharing options...
mdemeyer Posted March 14, 2018 Share #10 Posted March 14, 2018 Yes the exposure is right. Just seems to be a bug in the data display. 1 Link to post Share on other sites More sharing options...
fatihayoglu Posted March 14, 2018 Share #11 Posted March 14, 2018 (edited) And I am quite surprised Leica hasn't fixed it yet. Edited March 14, 2018 by fatihayoglu 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now