johnwolf Posted May 31, 2007 Share #1 Posted May 31, 2007 Advertisement (gone after registration) Sorry for what is probably an obvious question, but I'm giving C1 a try, and I can't figure out how to scale output. The width and height parameters are grayed-out. The help says use the Scaling% function, but I can't find it. Thanks. John Link to post Share on other sites More sharing options...
Advertisement Posted May 31, 2007 Posted May 31, 2007 Hi johnwolf, Take a look here Scaling in C1 LE. I'm sure you'll find what you were looking for!
cbretteville Posted May 31, 2007 Share #2 Posted May 31, 2007 I have a feeling that this is one of the things you have to do outside of C1LE unless you upgrade to Pro. Link to post Share on other sites More sharing options...
tashley Posted May 31, 2007 Share #3 Posted May 31, 2007 In the left-hand pane, go to the one cog symbol and you can then choose output size. On a Mac at least! t Link to post Share on other sites More sharing options...
erl Posted June 1, 2007 Share #4 Posted June 1, 2007 John, In my view, this is the most serious shortfall of C1LE. You CANNOT scale your output. C1PRO allows it, but for the $400 + upgrade, forget it! Scale in PS. A drag, but C1LE, when you learn it with the piss poor help files, is very good. The other much needed improvement is "graded" tagging, as in the old RawShooter (gobbled up by Adobe:mad: ). An extremely useful function when selecting/editing files for different reasons. I have emailed Phase One with these suggestions, at there invitation, so I hope they find their way into the the awaited Ver. 4, much overdue! Meanwhile, Ver. 3 is excellent IMHO, just frustrating. Link to post Share on other sites More sharing options...
johnwolf Posted June 1, 2007 Author Share #5 Posted June 1, 2007 Thank, everyone. I suspected that would be the anwer. Still, after finally giving C1 a chance, I'm with you, Erl. Very nice results with M8 files. John Link to post Share on other sites More sharing options...
DavidStone Posted June 1, 2007 Share #6 Posted June 1, 2007 Thank, everyone. I suspected that would be the anwer. Still, after finally giving C1 a chance, I'm with you, Erl. Very nice results with M8 files. John Well, I'm with Tim on this one. I'm using C1 LE (v. 3.7.7) on a Mac and using the 'single cog' processing feature, I have scaling available to any percentage I care to put in. I've been using it a lot just recently to produce scaled-down jpgs for making reference prints (60% = A5). Assuming that this is what you were looking for, I'm puzzled as to why some of us have this and some do not. I'm using the version of C1 LE that came with the M8, upgraded to the later version, but both versions have this feature. David Link to post Share on other sites More sharing options...
wlaidlaw Posted June 1, 2007 Share #7 Posted June 1, 2007 Advertisement (gone after registration) Well, I'm with Tim on this one. I'm using C1 LE (v. 3.7.7) on a Mac and using the 'single cog' processing feature, I have scaling available to any percentage I care to put in. I've been using it a lot just recently to produce scaled-down jpgs for making reference prints (60% = A5). Assuming that this is what you were looking for, I'm puzzled as to why some of us have this and some do not. I'm using the version of C1 LE that came with the M8, upgraded to the later version, but both versions have this feature. David I too have scaling on my Mac version of 3.7.7 - I would guess all the Mac C1LE's have this. As far as upscaling is concerned, I am not sure it is as good as the bi-cubic upscaling in PS or PSE. I used to use Genuine Fractals but now I don't bother. The upscaling in PSE4 seems just as good to me. Again I used to do it in 10% stages but cannot detect any difference if you do it all at one go for example from standard M8 to A3+ at 300 dpi (5800 x 3866 pixels). Wilson Link to post Share on other sites More sharing options...
erl Posted June 1, 2007 Share #8 Posted June 1, 2007 From what I can make out, The Mac's DO have the scaling facility, the PC's do NOT. A gross oversight by Phase One. I sincerely hope they redress this anomoly with Ver. 4 ... soon! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.