troyfreund Posted October 1, 2006 Share #1 Posted October 1, 2006 Advertisement (gone after registration) So, a week or so ago, I was out shooting with my DMR/R8 at a street festival. Shot for about 6 hours with no issues. The next morning I went out to shoot some family pictures at a baptism. I fired of my first shot, to check out my lighting and noticed that only 2/3 of my frame was showing. I opend the back of the camera to discover that my shutter was totally frigged, at least blades out of order/bent. I've sent the camera in for repair, thinking it was simple a camera issue. I just spoke with someone else yesterday who suggested that it was actually due to the DMR. Has anyone heard of a DMR causing the R8/R9 shutter to fail?? Troy Link to post Share on other sites More sharing options...
Advertisement Posted October 1, 2006 Posted October 1, 2006 Hi troyfreund, Take a look here DMR/R8 shutter issue. I'm sure you'll find what you were looking for!
stunsworth Posted October 1, 2006 Share #2 Posted October 1, 2006 Given that the DMR doesn't touch the shutter I can't see it being anything other than coincidence. Not something I've heard of anyhow. Link to post Share on other sites More sharing options...
mgcd Posted October 2, 2006 Share #3 Posted October 2, 2006 Troy - Like Steve said it is very unlikely that the DMR caused this unfortunate event. Cheers, Link to post Share on other sites More sharing options...
Moritz Posted October 2, 2006 Share #4 Posted October 2, 2006 I've heard of one other case of a Leica Photographer living in Munich who had the same problem with his R8/DMR. His even a member of this forum posting seldonly in the german section. Regards Moritz Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.