marchyman Posted August 1, 2024 Share #21 Posted August 1, 2024 Advertisement (gone after registration) Probably not a record. But for the record I did check for any other threads on the subject before posting mine. Perhaps we were all posting at about the same time? I'm assuming the mods will combine the threads... yes? Link to post Share on other sites More sharing options...
Advertisement Posted August 1, 2024 Posted August 1, 2024 Hi marchyman, Take a look here M11 firmware v2.1.2. I'm sure you'll find what you were looking for!
EdwardWestin Posted August 1, 2024 Share #22 Posted August 1, 2024 updated firmware without issue via SD card. I first formatted the SD with my MAC to xFAT format Copied firmware onto SD card Used a nearly full 95% battery Did not opt to save any profile (don't really make use of them on this camera) Update took a few minutes. No having to reset date 1 Link to post Share on other sites More sharing options...
Gelatino Posted August 1, 2024 Share #23 Posted August 1, 2024 Surprising that it was not announced by LUF admin. 2 Link to post Share on other sites More sharing options...
TheEyesHaveIt Posted August 1, 2024 Share #24 Posted August 1, 2024 (edited) Updated via Fotos app with no problem. Edited August 1, 2024 by TheEyesHaveIt 1 Link to post Share on other sites More sharing options...
hdmesa Posted August 1, 2024 Share #25 Posted August 1, 2024 Maybe the M11-D will finally released now! 🫠 Updated the M11M without issue, did the full resets. Seems to be working fine. 1 Link to post Share on other sites More sharing options...
lct Posted August 1, 2024 Share #26 Posted August 1, 2024 Got minor freezes associated with the dust protection function under firmware 2.1.1. They seem to be fixed under firmware 2.1.2 so i plan to delete my tip 6 accordingly. Will do it in September if freezes don't come again until then. Link to post Share on other sites More sharing options...
RedDotLurker Posted August 1, 2024 Share #27 Posted August 1, 2024 Advertisement (gone after registration) M11 Fotos App update with no problems so far. 1 Link to post Share on other sites More sharing options...
01af Posted August 1, 2024 Share #28 Posted August 1, 2024 Ugh. This is the first time in my life that a firmware update arrives for a camera I own before I applied the previous firmware update. 1 Link to post Share on other sites More sharing options...
hdmesa Posted August 1, 2024 Share #29 Posted August 1, 2024 1 hour ago, lct said: Got minor freezes associated with the dust protection function under firmware 2.1.1. They seem to be fixed under firmware 2.1.2 so i plan to delete my tip 6 accordingly. Will do it in September if freezes don't come again until then. We can also put the UHS-I versus UHS-II debate to bed for now. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/400040-m11-firmware-v212/?do=findComment&comment=5458314'>More sharing options...
nek724 Posted August 2, 2024 Share #30 Posted August 2, 2024 So I'm fairly new to digital Leica so excuse my dumb question, if I update through the app, during the update, does it also "wipe" format the SD card while it's at it? If I were to download and drop the file to the SD and update that way, will that also "wipe" format the SD? I want to know because I want to go ahead with the update, but would like to keep the few shot I have on the SD for a little longer. Or I remove the SD before updating through the app, and afterwards put the SD back in? Link to post Share on other sites More sharing options...
thrid Posted August 2, 2024 Share #31 Posted August 2, 2024 So far, so good. Updated via Fotos 1 Link to post Share on other sites More sharing options...
THEME Posted August 2, 2024 Share #32 Posted August 2, 2024 Took some five minutes via app, all fine. Interesting to see that some photogs own not only one M11. Too many lenses? 😁 1 Link to post Share on other sites More sharing options...
harmen Posted August 2, 2024 Share #33 Posted August 2, 2024 2 hours ago, nek724 said: So I'm fairly new to digital Leica so excuse my dumb question, if I update through the app, during the update, does it also "wipe" format the SD card while it's at it? I just updated via the app. My earlier shots are still there. 1 Link to post Share on other sites More sharing options...
Knightspirit Posted August 2, 2024 Share #34 Posted August 2, 2024 I'm in - I had a freeze today! Odd one at that - pushed the shutter button - nothing. Pushed again - nothing. No lights to indicate anything wrong. Turned camera off - got the red light and I was frozen. Maybe the update will fix it - has only done that particular one twice. 1 Link to post Share on other sites More sharing options...
lct Posted August 2, 2024 Share #35 Posted August 2, 2024 9 minutes ago, Knightspirit said: I'm in - I had a freeze today! Odd one at that - pushed the shutter button - nothing. Pushed again - nothing. No lights to indicate anything wrong. Turned camera off - got the red light and I was frozen. Maybe the update will fix it - has only done that particular one twice. May happen randomly. Half pressing the shutter release can suffice to awake the camera but popping out both battery and SD card can be necessary in worst cases. Firmware 2.1.2 does not fix the issue unfortunately. Disabling dust protection could avoid the problem under fw 2.1.1. I will test it again under fw 2.1.2 so i will refrain from deleting my tip 6 for now. Link to post Share on other sites More sharing options...
DadDadDaddyo Posted August 2, 2024 Share #36 Posted August 2, 2024 M11 and M11M updated via Fotos without issue. 2 Link to post Share on other sites More sharing options...
lct Posted August 2, 2024 Share #37 Posted August 2, 2024 4 hours ago, hdmesa said: We can also put the UHS-I versus UHS-II debate to bed for now. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Same warning since fw 2.0.1 apparently. Strange that opimization for UHS-I takes that long, being an earlier technlogy. 1 Link to post Share on other sites More sharing options...
kiwidad Posted August 2, 2024 Share #38 Posted August 2, 2024 10 hours ago, Knorp said: It's in the release notes ... en_2.1.2-m-family-release-notes.pdf 114.88 kB · 63 downloads Next you will want me to read the manual lol I don’t recall being prompted to do this when updating via the Fotos app either. Given the use of the word recommended I take it with a grain of salt as something to do should issues arise. Kinda like rebooting your computer after a software install. The bit that fought my attention was the comment about UHS-1 cards. SO, another bone of contention ( again taken with a grain of salt)… why did Leica recommend a number of UHS-1 cards for the M11? Is there a current flavor of UHS-2 recommended ? 1 Link to post Share on other sites More sharing options...
Knorp Posted August 2, 2024 Author Share #39 Posted August 2, 2024 8 minutes ago, kiwidad said: Next you will want me to read the manual lol I don’t recall being prompted to do this when updating via the Fotos app either. Given the use of the word recommended I take it with a grain of salt as something to do should issues arise. Kinda like rebooting your computer after a software install. The bit that fought my attention was the comment about UHS-1 cards. SO, another bone of contention ( again taken with a grain of salt)… why did Leica recommend a number of UHS-1 cards for the M11? Is there a current flavor of UHS-2 recommended ? Well, you know what they say: RTFM! But really, their instructions and notes are often not correct. Makes you wonder when they last time went through their own procedures ... 1 Link to post Share on other sites More sharing options...
Knorp Posted August 2, 2024 Author Share #40 Posted August 2, 2024 8 hours ago, Gelatino said: Surprising that it was not announced by LUF admin. He's probably still on holiday ... 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now