lrobbin Posted March 25, 2023 Share #1 Posted March 25, 2023 Advertisement (gone after registration) Suddenly, yesterday, I could no longer use my 10-R. I get this error message: "Attention SD Card Protected" I have made sure my SD card was set correctly. No. Same error message. I changed SD cards. Same error. I checked to confirm the firmware is up to date. Same error. Re-formatted a card. Same. It's locked and I can no longer use it. Any thoughts or ideas to try before I bring the camera into Repair? Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Quote Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/374620-recurring-error/?do=findComment&comment=4736597'>More sharing options...
Advertisement Posted March 25, 2023 Posted March 25, 2023 Hi lrobbin, Take a look here Recurring Error. I'm sure you'll find what you were looking for!
Simsseer Posted March 25, 2023 Share #2 Posted March 25, 2023 (edited) I suspect that the write protection is activated when the card is inserted or the camera is fooled into thinking this is the case. Probably a matter for Leica Service. Edited March 25, 2023 by Simsseer Quote Link to post Share on other sites More sharing options...
Nimar Posted March 25, 2023 Share #3 Posted March 25, 2023 (edited) Is there a physical toggle to write protect SD cards a la floppies? Don’t have one in front of me to verify but would guess whatever checks for this in the sd reader in the camera is obstructed (or broken). Maybe try blowing some air at it / cleaning. Though don’t know exactly what cleaning would entail. Edited March 25, 2023 by Nimar Quote Link to post Share on other sites More sharing options...
dugby Posted March 25, 2023 Share #4 Posted March 25, 2023 RESETTING THE CAMERA TO FACTORY SETTINGS This function allows you to reset all your custom menu settings back to the factory settings. You can optionally exclude the user profiles, WLAN settings, and image numbering from the reset individually. ▸ Select Reset Camera in the main menu • The prompt Reset camera to basic settings? appears. ▸ Confirm or reject the reset to factory settings (Yes) / (No) • Selecting No will cancel the reset and the display will return to the main menu. Confirming with Yes will trigger additional prompts regarding the settings you can opt to keep. ▸ Confirm or reject keeping the user profiles (Yes) / (No) ▸ Confirm or reject keeping the WLAN settings (confirm Yes) / (reject No) ▸ Confirm or reject keeping the image numbering (Yes)/ (No) • The camera will be reset. Notes • Date & time, as well as the preferred language will have to be set up again after a reset. Relevant prompts will appear on screen. • The image file numbering can also be reset separately via the menu item Image Numbering (see p. 115). Quote Link to post Share on other sites More sharing options...
KFo Posted March 25, 2023 Share #5 Posted March 25, 2023 If it were me.... I doubt this is software related this. The switch is electro-mechanical. You can look right inside the SD card slot a see the little write protect switch. I'd reach in with a plastic dental pick and fiddle with it a bit. Maybe blow some air in too; might have got something stuck in there. Quote Link to post Share on other sites More sharing options...
lrobbin Posted March 25, 2023 Author Share #6 Posted March 25, 2023 I do believe it is physical. I will check, look at the switch, blow on it. Thanks. ...OK, I blew air in the SD Card slot. That fixed it! 7 1 Quote Link to post Share on other sites More sharing options...
Borna Posted March 26, 2023 Share #7 Posted March 26, 2023 Advertisement (gone after registration) 22 hours ago, lrobbin said: I do believe it is physical. I will check, look at the switch, blow on it. Thanks. ...OK, I blew air in the SD Card slot. That fixed it! Glad to hear! Wierd that some dust made it so sensitive. Enjoy it Quote Link to post Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.