Light leak issue or developing issue?

[que_lo_kev]

Advertisement (gone after registration)

I have recently purchased a Leica m6. I developed my first roll yesterday and there is a blemish on all four corners. This issue occurs on every single frame. I am not sure if it is a light leak issue or a developing issues. I am leaning more towards a light leak issue since it happens on every single frame at the same location. I called the Leica Store but they can't help me at the moment due to Covid 19.

Edited July 28, 2020 by que_lo_kev

[jaapv]

Please show...

[que_lo_kev]

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

[que_lo_kev]

I am adapting jupiter lenses onto the m6 with some LTM to M mount adapters I bought from ebay.

[Pyrogallol]

Do the marks extend outside the frame area on the negatives?

They look a bit odd. Were you using any lenshood that might have generated light reflections?

if its on every negative it might be light leaking from somewhere, perhaps the back door, strange that it’s in all four corners.

i don’t think it is a developing problem.

Edited July 29, 2020 by Pyrogallol

[250swb]

The leak seems to be coming from the rear door (the flare is orange, so coming through the film base). The rear door of the M6 should only have one foam/rubber seal along the top edge, it's only visible if you unclip the rear door. Often if this seal fails people not only replace the top seal but also add seals around the rest of the door thinking they are missing, it then causes the rear door to sit too far away from its baffle light trap. So check to see if you have any rubber or foam seals around the other three sides of the door, this could be causing the problem.