Jump to content

Recommended Posts

Advertisement (gone after registration)

I had my Leica Q in a tripod when suddenly someone touched it and felt on the floor; tripod and my Leica Q.

The impact was produced in the metal lens hood and it seems, fortunately, it didn’t affect neither the sensor nor the objective. It is a robust camera. Maybe because I’m not a professional photographer I’m not able to appreciate if my picture image quality is different after this impact. I want to mean if due to this impact the quality has been afected.

Anyone could tell me some trips or a way to identify if this impac affects to my Leica Q in terms of quality?

I shoot pictures and they seem good but maybe this impact could change the image quality. Thanks for your help!

Link to post
Share on other sites

I dropped my Q2 in a rain storm also on tripod. The ballhead came loose and the camera fell to the pavement. It damaged the top plate on the left side and the hood. I sent it to Leica USA for service. They also discovered an internal circuit board that needed replacing. It took 1 month and cost $800. I was glad to get it back looking like new. It has worked perfectly since the repair. 


You could try various shots and see if you can discover any defects. I would be sensitive to focusing accuracy and smooth operation of the lens. If any doubts, send it to Leica to be checked. 
Good luck!

Link to post
Share on other sites

With a little luck the hood took all the force of the impact and cushioned / absorbed it with no adverse damage to the camera or lens. You could try taking a photo of a brick wall after aligning the camera to eliminate any potential distortion and then check resultant images to make sure they are all in focus and distortion free

dunk

Edited by dkCambridgeshire
Link to post
Share on other sites

1 hour ago, dkCambridgeshire said:

With a little luck the hood took all the force of the impact and cushioned / absorbed it with no adverse damage to the camera or lens. You could try taking a photo of a brick wall after aligning the camera to eliminate any potential distortion and then check resultant images to make sure they are all in focus and distortion free

dunk

Good idea. My hood had a lot of road rash after the drop. I considered just living with it or painting the exposed aluminum area. Instead I replaced it, otherwise every time I looked at it I would be reminded of that rainy morning. 

Link to post
Share on other sites

Sorry to read of the camera/tripod mishap.

 

I know my response is a little off topic from the OP.

I use a tripod (Gitzo) which has a hook at the bottom of the centre post, from which I hang something heavy (eg camera bag, or even a shopping bag).

This reduces the chance of the camera/tripod toppling in strong winds or slight knocks from clumsy people (me).

 

 

Link to post
Share on other sites

vor 9 Stunden schrieb dugby:

This reduces the chance of the camera/tripod toppling in strong winds or slight knocks from clumsy people (me).

Yes, this is the reason for this hook.
This also comes very handy if you shoot very low light with long exposure times as ti will eliminate vibraten from a too/very light tripod.

Chris

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...