Jump to content

Recommended Posts

Advertisement (gone after registration)

Today I shoot direct to sun and then I saw some spots on the right and middle part of the photo. Are they dust on the lens or on the sensor? Never taken off the lens since the day I bought the camera. But I shoot under rain at Nepal. Can it be water spots on the sensor? (Don’t think so) If they are dusts on the sensor what can be done? ( rocket blower etc?)

 

vPqBGp.jpg

 

Direct photo link: https://i.hizliresim.com/vPqBGp.jpg

Edited by double_0_se7en
Link to post
Share on other sites

I had no problem opening his link:

 

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

 

 

 

 

And it is clearly a filthy sensor.

 

Read the FAQ on sensor cleaning.

  • Like 1
Link to post
Share on other sites

Today I shoot direct to sun and then I saw some spots on the right and middle part of the photo. Are they dust on the lens or on the sensor? Never taken off the lens since the day I bought the camera. But I shoot under rain at Nepal. Can it be water spots on the sensor? (Don’t think so) If they are dusts on the sensor what can be done? ( rocket blower etc?)

 

Direct photo link: https://i.hizliresim.com/vPqBGp.jpg

 

Looks very much like bits of dust.  I get them from time to time on my photos.  If I clean the lens either with a wipe down and/or a rocket blow, they'll go away. 

Link to post
Share on other sites

I use one of these https://www.bhphotovideo.com/c/product/259157-REG/Giottos_AA1900_Rocket_Air_Blower.html

 

It's basically just a rubber bulb blower with a pretty good capacity. I remove the lens, set the camera to clean (sometimes needed depending on the camera to expose the sensor) hold it upside down in as good light as I can and squeeze the bulb gently to try to blow out the dust. Then I put it together again and go shoot clear sky and see if there is still dust. You can escalate from there to try to actually try to swab the sensor (get a cleaning kit) but often just blowing a couple of times upside down is enough to do it. The less you actually touch the sensor, the safer it will be.

 

When you change lenses, turn the camera off, hold the camera down and try to remove the old lens and put the new one on as quickly as you can to prevent more dust from getting in there. Happens to everybody.

Link to post
Share on other sites

Eeew! That means paying for a new sensor after every shot.

 

In all seriousness, I remember the film era very well.  I was young, and was afraid to hit the shutter or indulge in photography overall because I was concerned that each frame costs money.  I felt that I couldn't freely experiment with photography and as a result photography fell by the wayside for a couple of decades. 

 

I didn't pick up photography again until my mid to late 30s with the Canon 7D, Panasonic LX5, and eventually the Leica M8.2  It was the M8.2 and the digital freedom to click on the shutter as many times as I need and receive immediate feedback which set me back on the path to photography.  My learning and knowledge rocketed with digital cameras. 

  • Like 2
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...