mozg31337 Posted July 16, 2018 Share #1 Posted July 16, 2018 Advertisement (gone after registration) Hello. I use a 1950s collapsible summicron with a metal lens cap which is very loose. I am afraid to loose it one day. Is there anything that I can do to make it stay firmly in the lens? It's my friends lens, so I don't wish to drastically alter the cap. Thanks Link to post Share on other sites More sharing options...
Advertisement Posted July 16, 2018 Posted July 16, 2018 Hi mozg31337, Take a look here Summicron 50mm collapsible loose cap. I'm sure you'll find what you were looking for!
Pyrogallol Posted July 16, 2018 Share #2 Posted July 16, 2018 You could replace the soft lining inside the lens cap, it can be a bit fiddly and you ideally need some thin self adhesive material. I have tried various materials and it is too easy to use too much glue or too thick a material, such as felt. I was given some self adhesive material used by a high end hifi turntable manufacturer which is ideal. Link to post Share on other sites More sharing options...
UliWer Posted July 16, 2018 Share #3 Posted July 16, 2018 Usually the original metal lens caps have a red or black velvet layer on the inside. Then your cap should be rather tight. If it has the velvet inner side and is still too loose it may have the wrong size (perhaps 41mm for the old 50 mm Summarit and not 39mm you need for the Summicron). Link to post Share on other sites More sharing options...
mozg31337 Posted July 16, 2018 Author Share #4 Posted July 16, 2018 It still has the material, black or dark blue in colour. It doesn't fall off if I turn it up side down. However, if the camera moves about and touches something, it will likely going to fall off as happened a few times. Link to post Share on other sites More sharing options...
mozg31337 Posted July 16, 2018 Author Share #5 Posted July 16, 2018 Sorry, I just realised that there is the Leica M Lens forum, which should be the place to post this thread. Sorry about that! Link to post Share on other sites More sharing options...
pico Posted July 16, 2018 Share #6 Posted July 16, 2018 A solution should be one you can undo because it is not your lens. Try placing a narrow strip of masking tape around the very front ring of the lens. If that's too tight, try a shorter piece of tape. Continue until you have a firm but compliant fit. I just went through my big box of rubber bands and did not find one small enough to fit in the groove of the front ring, but you might find one. Maybe Jaapv can tell us if an orthodontic band would work. Orthodontic band. Wow, makes me wish I were a musician. Link to post Share on other sites More sharing options...
mozg31337 Posted July 16, 2018 Author Share #7 Posted July 16, 2018 Advertisement (gone after registration) Oh, that sounds like a good plan to try and can be easily undone! Thanks for all your help. 1 Link to post Share on other sites More sharing options...
pico Posted July 16, 2018 Share #8 Posted July 16, 2018 Oh, that sounds like a good plan to try and can be easily undone! Thanks for all your help. I do not know where you live, but if there is an Ace Hardware nearby bring the lens and go to the O-Ring bins which are usually in the plumbing section. You can even try them on. Ace people here love to find the right solutions. Best of luck! Link to post Share on other sites More sharing options...
RoccCity Posted July 16, 2018 Share #9 Posted July 16, 2018 https://www.amazon.com/Kaiser-Lenses-Outside-Diameter-206940/dp/B0015KDLB4/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref=yo_pop_d_pd_title I highly recommend this lens cap for Summicrons. I use it and never have to worry about it falling off and even if it did it’s very inexpensive. Link to post Share on other sites More sharing options...
ckuwajima Posted July 17, 2018 Share #10 Posted July 17, 2018 I keep my metal cap safely stored at home, it is too easy to loose. For day by day use, I carry a cheap generic pinch plastic cap. Link to post Share on other sites More sharing options...
gbealnz Posted July 17, 2018 Share #11 Posted July 17, 2018 I keep my metal cap safely stored at home, it is too easy to loose. For day by day use, I carry a cheap generic pinch plastic cap. My suggestion as well, the real metal one is too valuable to misplace. Gary Link to post Share on other sites More sharing options...
Ko.Fe. Posted July 17, 2018 Share #12 Posted July 17, 2018 My suggestion as well, the real metal one is too valuable to misplace. Gary If it is original one. But they make new metal ones and cheap. 10USD, free shipping. Metal ones. OP might have this one. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now