Jump to content

PROBLEM With The S 006 Just Purchased.. Need Your Help


rollsman4

Recommended Posts

Advertisement (gone after registration)

  I just purchased the S 006 and the 70mm lens from A Reputable store in 9+ condition. I have it about a week and the Rear LCD shows my exposure to look correct. When I check it out on my monitor it is very much UNDEREXPOSED. So, I lowered the Brightness adjustment to the Lowest setting and still looks perfectly exposed and when I check it on my computer its Very Underexposed. Can anyone tell me what might be causing this?  I want so much to keep the S BUT I am NOT happy with whats happening. I will try to attach a file now. I use Flash on Camera as I do when not shooting off camera flash. ISO 200. F6.5/8.0 at 10-12 feet. I know my flash settings so its not that I don't know.

  I hope I can get this resolved otherwise I have to return it.  Thank you, Dennis

 

  The File is too big ( jpeg too big)

Link to post
Share on other sites

Check your exposure compensation. I noticed today on my SL that my Exposure compensation was +3 (I don't remember setting it there, but whatever). That can have impact on what you see on the LCD screen.

 

Also maybe check your LCD screen brightness.

 

  I just purchased the S 006 and the 70mm lens from A Reputable store in 9+ condition. I have it about a week and the Rear LCD shows my exposure to look correct. When I check it out on my monitor it is very much UNDEREXPOSED. So, I lowered the Brightness adjustment to the Lowest setting and still looks perfectly exposed and when I check it on my computer its Very Underexposed. Can anyone tell me what might be causing this?  I want so much to keep the S BUT I am NOT happy with whats happening. I will try to attach a file now. I use Flash on Camera as I do when not shooting off camera flash. ISO 200. F6.5/8.0 at 10-12 feet. I know my flash settings so its not that I don't know.

  I hope I can get this resolved otherwise I have to return it.  Thank you, Dennis

 

  The File is too big ( jpeg too big)

Link to post
Share on other sites

Check your exposure compensation. I noticed today on my SL that my Exposure compensation was +3 (I don't remember setting it there, but whatever). That can have impact on what you see on the LCD screen.

 

Also maybe check your LCD screen brightness.

 

 

  I never thought about the Expos Compen. I will check that for sure. I hardly ever touch that adjustment.  I did Lower the Brightness as LOW as I could.  Thank you again

Link to post
Share on other sites

  I never thought about the Expos Compen. I will check that for sure. I hardly ever touch that adjustment.  I did Lower the Brightness as LOW as I could.  Thank you again

 

  I just checked EXPO Comp and its set to OFF

Link to post
Share on other sites

I have not faced that issue so can not recommend a cure. But you may want to try to take exposure readings with a hand held meter (or another camera, for that matter) and compare what the 006 reading is. Or try a different metering mode for comparison's sake. 

Sorry to hear about your troubles. I have no doubt that you pondered long and hard about this important and expensive decision. Makes the disappointment that much more palpable. Best of luck and let us know how it works out.

David

Link to post
Share on other sites

I have not faced that issue so can not recommend a cure. But you may want to try to take exposure readings with a hand held meter (or another camera, for that matter) and compare what the 006 reading is. Or try a different metering mode for comparison's sake. 

Sorry to hear about your troubles. I have no doubt that you pondered long and hard about this important and expensive decision. Makes the disappointment that much more palpable. Best of luck and let us know how it works out.

David

 

 

  Thank you David. I do have a Meter so I can check out the Flash exposure and see . I will continue to seek help from the Forum members and maybe find out whats happening and resolve it.   Thank you again, Dennis

Link to post
Share on other sites

I just purchased the S 006 and the 70mm lens from A Reputable store in 9+ condition. I have it about a week and the Rear LCD shows my exposure to look correct. When I check it out on my monitor it is very much UNDEREXPOSED. So, I lowered the Brightness adjustment to the Lowest setting and still looks perfectly exposed and when I check it on my computer its Very Underexposed. Can anyone tell me what might be causing this?  I want so much to keep the S BUT I am NOT happy with whats happening. I will try to attach a file now. I use Flash on Camera as I do when not shooting off camera flash. ISO 200. F6.5/8.0 at 10-12 feet. I know my flash settings so its not that I don't know.

  I hope I can get this resolved otherwise I have to return it.  Thank you, Dennis

 

  The File is too big ( jpeg too big)

I do have this experience. The old 35mm S lens. The problem was sticky aperture unit. I.e. Even with exposure comp. off or neutral. The aperture stay close or it will not open up. Either case creating overexposure or underexposed images. I mean check and see if your viewfinder feels a bit dim. Or the lens to see if the aperture blades are sticking?

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...