Alberti Posted November 16, 2015 Share #1 Posted November 16, 2015 Advertisement (gone after registration) Today I received a book published with Blurb and made from the Lightroom app. The pictures (MM, M) are incredibly sharp. The black and white on the front is beyond breath. However, black and white from the MM on the inside have all been turned into some kind of dark sepia (brown hue). It is off-tone. Colored pictures from the M with black in it are black. Borders are appropriately black where this was selected as background. Blurb can obviously handle black. Who has encountered this sepia toning of MM pictures generated from Lightroom? What should I do? Link to post Share on other sites More sharing options...
Advertisement Posted November 16, 2015 Posted November 16, 2015 Hi Alberti, Take a look here Blurb erroneously coloring monochrome pictures into sepia. I'm sure you'll find what you were looking for!
AceVentura1986 Posted November 17, 2015 Share #2 Posted November 17, 2015 Blurb probably printed the MM images as if they were color images thus resulting in a color cast. This is because it is nearly impossible to generate neutral BW prints using a color printer. In the future you might be better off either printing duo tone images or at least applying a pale cream layer which will give the image just enough color that it should look like warm grey rather than sepia. Link to post Share on other sites More sharing options...
johnwolf Posted December 1, 2015 Share #3 Posted December 1, 2015 Alberti, did you make any progress with this? I tried the same format with Blurb and have no color cast. Did you see these instructions for B&W in Blurb? The thing I don't understand is how publishing from LR complies with these requirements, since LR does not output CMYK. I know that if you send sRGB image to Blurb, it automatically converts them to CMYK, but that's probably not the right approach for B&W. For my book I used InDesign. I output the grayscale images from LR as TIFFs and then converted them to CMYK using Photoshop. The BW is very neutral. John Link to post Share on other sites More sharing options...
Alberti Posted December 1, 2015 Author Share #4 Posted December 1, 2015 Thanks John. No progress so far. Blurb was so kind to send me a new copy, and like I expected, they had the same brownish tone again. Most of my B&W images came from a Monochrome, and Lightroom does not allow any of the recommendations that are given on the Blurb site for Photoshop. So there is no saturation slider available. But also B&W from a M, processed in Silver Effex Pro turned out with a (varying) cast. While a simple conversion in Lightroom or Capture One sometimes works out fine (??) The recommendations you link to are for processing native color images in Adobe Photoshop. Because the book was over $ 50, I have no intent to experiment. There should be paper selections that do work out. Who can recommend such settings? albert Link to post Share on other sites More sharing options...
250swb Posted December 1, 2015 Share #5 Posted December 1, 2015 You have to follow Blurb's instructions exactly, and because those aren't always immediately apparent it can be a case of check and double check. But I have done a B&W book through Blurb and the results were spot on. It is almost impossible to second guess the fine detail another user needs, but if you use perhaps a duo-tone rather than 'Greyscale' it gives the sRGB file you are submitting another level of colour authority, and using the best paper is far better than the cheap paper. Steve Link to post Share on other sites More sharing options...
Alberti Posted December 1, 2015 Author Share #6 Posted December 1, 2015 Thanks Steve, I used the Lightroom-Blurb plug-in, so I cannot manage anything! I was afraid that making the book in the traditional way with JPG's would reduce the detail. . . albert Link to post Share on other sites More sharing options...
johnwolf Posted December 1, 2015 Share #7 Posted December 1, 2015 Advertisement (gone after registration) It sounds to me like the problem is with the LR-Blurb plug-in, which must not be configured to handle B&W per Blurb requirements. I know that for color (sRGB) Blurb automatically does the CMYK conversion. But maybe not for B&W. I think if you output grayscale from LR and then could find a way to convert to CMYK, you'd be OK. There are some online utilities for that, if you don't have Photoshop. But then you could not re-import into LR to use the plug-in. John Link to post Share on other sites More sharing options...
250swb Posted December 4, 2015 Share #8 Posted December 4, 2015 I've sent sRGB to Blurb and they came out great, but don't think of a B&W picture as Greyscale. B&W when printed in high end photo books is never ever Greyscale, it is duo-tone, tri-tone, quad-tone, etc. So give the image some sort of colour information, it doesn't have to shout 'sepia' or anything like that. Steve Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.