ananda Posted July 28, 2013 Share #1 Posted July 28, 2013 Advertisement (gone after registration) When I turn my M on, going from off to "S", for example, the little red light at the bottom right of the screen blinks a few times and then there is an audible click (or maybe a bit of a clunk) and then the camera is read to shoot. It takes about 2 seconds to be ready to shoot. I am currently using a SanDisk Extreme 32 GB card with a "10" on it which I guess means class10 or whatever. Is the audible clunk/click normal??? Isit the shutter being cocked?? Link to post Share on other sites More sharing options...
Advertisement Posted July 28, 2013 Posted July 28, 2013 Hi ananda, Take a look here What am I hearing?. I'm sure you'll find what you were looking for!
lct Posted July 28, 2013 Share #2 Posted July 28, 2013 You must be in LV mode. Press the LV button and/or that of the EVF and try again. Link to post Share on other sites More sharing options...
ananda Posted July 28, 2013 Author Share #3 Posted July 28, 2013 I had not pressed the LV button, but LV is "on" in the menu and the next menu item is set to "manual". I'm a bit confused! Link to post Share on other sites More sharing options...
algrove Posted July 28, 2013 Share #4 Posted July 28, 2013 Turn your camera on. If you hear the click, it is going into LV. So then hit the LV button to turn off LV. The next time you turn on your camera it should not click unless you have activated LV between turning it off and turning on your camera. Let us know. Link to post Share on other sites More sharing options...
ananda Posted July 28, 2013 Author Share #5 Posted July 28, 2013 )O, I turn camera on. It clunks or clicks. But the screen is black. If I then hit the LV button the screen shows the scene. If I hit the LV button again to turn LV off, and then shit off cameram and then turn it back on, I still get that clunk or click. I guess something's wrong! Link to post Share on other sites More sharing options...
ananda Posted July 28, 2013 Author Share #6 Posted July 28, 2013 If camera is ON, and I hit the LV button, screen goes from black to LV. If I then hit the LV button again, screen goes black. If I turn the camera OFF, then back on, I still get the click/clunk sound and the screen remains black (unless I hit the LV button again.) Can anyone tell me if this is weird or not? Link to post Share on other sites More sharing options...
jaapv Posted July 28, 2013 Share #7 Posted July 28, 2013 Advertisement (gone after registration) Have you switched on "advanced metering"? That will open the shutter at startup as well. Link to post Share on other sites More sharing options...
viramati Posted July 28, 2013 Share #8 Posted July 28, 2013 Yes sounds like you have advanced metering on just switch it to 'Classic' and all will be fine Link to post Share on other sites More sharing options...
ananda Posted July 28, 2013 Author Share #9 Posted July 28, 2013 thank you all. i think the issue may have been advanced metering. back in classic, no noise now. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.