lct Posted December 20, 2012 Share #21 Posted December 20, 2012 Advertisement (gone after registration) I'll redo some tests then. Sorry to have given you a bad advice if any. Link to post Share on other sites More sharing options...
Advertisement Posted December 20, 2012 Posted December 20, 2012 Hi lct, Take a look here Lens hood for Voigtlander 21mm f/4 . I'm sure you'll find what you were looking for!
Erik Gunst Lund Posted December 20, 2012 Author Share #22 Posted December 20, 2012 No problem at all, I was fully aware that it might need a trimming Link to post Share on other sites More sharing options...
Erik Gunst Lund Posted December 27, 2012 Author Share #23 Posted December 27, 2012 I got inspired by the Leica hood 12466 and shaped my new/old 14585H to remove the hard vignetting. I also added 4 small groves for the small locking pins to avoid rotation of the lens hood. Link to post Share on other sites More sharing options...
Erik Gunst Lund Posted December 27, 2012 Author Share #24 Posted December 27, 2012 Here with the typical M8 'glow' of the UVIR filter BTW Thanks to Ict for helping out! Appriciated Link to post Share on other sites More sharing options...
lct Posted December 27, 2012 Share #25 Posted December 27, 2012 Great DIY as usual. I see that you have the LTM version of the lens. This could explain why we did not get the same light fall-off with the regular 12585. You made me doubt though so i'll do another test when i have some time. Link to post Share on other sites More sharing options...
lct Posted December 28, 2012 Share #26 Posted December 28, 2012 Finally did it, curiosity was too strong. Same result as above at 50cm, f/22 so the 12585 hood can be used as is on the CV 21/4 P (M version). http://tinyurl.com/cc633vw http://tinyurl.com/dxfj5tz Link to post Share on other sites More sharing options...
russell c. greenberg Posted December 28, 2012 Share #27 Posted December 28, 2012 Advertisement (gone after registration) I use the voigtlander LH-2 hood with this lens on my M8, no vignetting, even wide open. Can't use this hood for full frame, it vignettes even at f8 or f11. I will try to locate the 12518 rubber hood for this lens on my M2. Thanks, Russell Link to post Share on other sites More sharing options...
lct Posted December 28, 2012 Share #28 Posted December 28, 2012 ...I will try to locate the 12518 rubber hood for this lens on my M2... Never tried it with the CV 21/4 on FF cams but the 12518 will vignette on your M2 i'm afraid. Same for the 12585 most probably. Link to post Share on other sites More sharing options...
russell c. greenberg Posted December 30, 2012 Share #29 Posted December 30, 2012 Has anyone tried the12504 divisible hood for the 35/1.4 version 2 or 35/f2 version 2/3 lenses on the 21/4 voigtlander lenses? I am sure they will work on M8 cameras w/o any vignetting, but will they work on full frame cameras? Please let me know if this hood works for full frame cameras (and this lens combination) w/o vignetting. Russell Link to post Share on other sites More sharing options...
fiatlux Posted January 2, 2013 Share #30 Posted January 2, 2013 I use the Leica hood of the 28mm 2.8 ASPH on mine (Leica 12526 I believe). It snaps on the external thread normally used for the original screw-on hood, and creates no additional vignetting on the M8. Looks cool and remains small. Link to post Share on other sites More sharing options...
Erik Gunst Lund Posted January 2, 2013 Author Share #31 Posted January 2, 2013 I have tested my lens hood for the 28mm 2.8 ASPH 12526 And it doesn't fit on my Voigtlander Screwmount 21mm f/4. The 12526 is made from plastic so the locking pins are further from the mount than the metal version 14585 Obviously there is a big risk of rotation of the 12526 even if it fits... unless you make four grooves for the locking pins. Link to post Share on other sites More sharing options...
lct Posted January 2, 2013 Share #32 Posted January 2, 2013 The 12526 hood fits well on the M version of the CV 21/4 where it grips onto the external hood thread of the lens but the hood rotates easily indeed. Blocking it should be possible through some DIY magic i guess but the buttons of the hood are easy to hit when turning the aperture ring so better have thin fingers for that. Link to post Share on other sites More sharing options...
fiatlux Posted January 2, 2013 Share #33 Posted January 2, 2013 The 12526 hood fits well on the M version of the CV 21/4 where it grips onto the external hood thread of the lens but the hood rotates easily indeed. Blocking it should be possible through some DIY magic i guess but the buttons of the hood are easy to hit when turning the aperture ring so better have thin fingers for that. I should have made clear that I had an M mount 21/4 indeed. However, I find that if I push the hood to the maximum on the lens, it won't rotate easily, even without any DIY magic. Link to post Share on other sites More sharing options...
lct Posted January 2, 2013 Share #34 Posted January 2, 2013 …I find that if I push the hood to the maximum on the lens, it won't rotate easily, even without any DIY magic. That's what i did as well. Our samples must be somewhat different i guess. Link to post Share on other sites More sharing options...
ShivaYash Posted July 16, 2017 Share #35 Posted July 16, 2017 Re-starting an OLD thread... is anyone using the CV LH-1, for M-E / M9? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.