Jump to content

Leica X1 and Camera Shake? Are you using IS or Tripod/Monopod?


polidoc

Recommended Posts

Advertisement (gone after registration)

Hi everybody,

I was wondering who of you is satisfied with the built-in Image Stabilization of the X1?

I did a few shots myself, IS turned on and off, but can't really tell the difference. Some images are blurred, others not.So, who of you is satisfied with it and who is using a tripod instead? What are your experiences?

Thanks and best regards

Michael

Link to post
Share on other sites

I have been leaving the IS off. It doesn't help when shooting anything that isn't stationary.

 

According the X1 user manual:

 

 

 

"The camera takes two pictures automatically in series with this function, one with a faster and one with a slower shutter speed (you will hear the shutter operate twice during the operation). Then, it takes the data of the two exposures and combines them into one with digital image processing.

• Therefore, please hold the camera steady until the shutter has released

the second time.

Due to the function using two exposures, it can only be applied with

static subjects."

I bought an external 35mm VF and mostly shoot with the VF attached - one of the reasons being to minimise camera shake.

Link to post
Share on other sites

The Leica IS in the X1 is unlike its counterparts in other cameras. It is limited to static shots only such as hand-held pictures in the interior of a building, where tripods are not permitted. In practice, I have yet to try it out because such a situation has not arisen, but it could do when on tour. Even then, I would prefer to use my little table tripod.

Link to post
Share on other sites

Hi folks,

thanks for the hints, I think I will check out the extra 36 mm VF, although it is quite expensive, but it is probably nicer to have the small VF around rather than carrying tons of tripods with you, although the results might be better.

According to the manual,the IS of the X1 seems to be working without any moving parts such as lenses or sensor, but works in shooting an image with a fast shutter-speed and a second one with a slow shutter-speed and combining the two.

Sounds really strange, does any other camera-manufacturer do it that way?

Cheers

Michael

Link to post
Share on other sites

Like others on the forum, I bought a Voigtländer 35mm VF. I paid €120 for it. It is pretty accurate, is better built (metal vs plastic), and smaller, than Leica's offering. Not to mention that it was less than half the price. They aren't that easy to come by though - mine was the last in stock on the site I ordered from.

Link to post
Share on other sites

Like others on the forum, I bought a Voigtländer 35mm VF. I paid €120 for it. It is pretty accurate, is better built (metal vs plastic), and smaller, than Leica's offering. Not to mention that it was less than half the price. They aren't that easy to come by though - mine was the last in stock on the site I ordered from.

 

Hi Stephen,

that's a good idea, thank you!

I try to find one in Germany :-)

Cheers

Michael

Link to post
Share on other sites

Advertisement (gone after registration)

Michael, I am sure you will find that the use of a viewfinder will help camera stability. While I am waiting for mine, I am stretching the camera strap taut when shooting and find that does help a lot in minimizing camera shake. My vf has been on order for a long time and I am keen to get it for the stated reasons.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...