Camaro5 Posted July 18 Share #21 Posted July 18 (edited) Advertisement (gone after registration) Since the lens is coated, I only use a clear filter with the hood since I live in a dusty environment. I found a hood cap similar to the original one except it has a padded black leather covering and is embossed with the Leica logo. Don't recall where I got it, but I used it on my Q2 and always liked this one. Edit: This is the one -- New Handmade Genuine Leather Lens Cap Protection Cover For Leica Q Q2 QP Typ116 | eBay Sold by Yoofuku. LOL. $19 US. From China, but the thing is really nice. Edited July 18 by Camaro5 Link to post Share on other sites More sharing options...
Advertisement Posted July 18 Posted July 18 Hi Camaro5, Take a look here Do you use a lens cap on your Q3 or Q3 43?. I'm sure you'll find what you were looking for!
daan Posted July 18 Share #22 Posted July 18 I don’t use a lens hood on any of my lenses, let alone a lens cap. On the Q3, I just use a 49mm Leica UV filter. Always ready to shoot! Link to post Share on other sites More sharing options...
viramati Posted July 20 Share #23 Posted July 20 No hood or cap on my Q2 Monchrom just a yellow filter most of the time but will put the hood on if out in the rain and a 3d printed cap that sort of plugs into the hood that Red Dot cameras in London gave me Link to post Share on other sites More sharing options...
plantagoo Posted July 20 Share #24 Posted July 20 Since the OG Q in 2015 I only use B+W Clear Filters on my Qs and depending on my mood the ring to secure the thread or one of the Leica Lens hoods (original or vented). Never had an issue. Best Link to post Share on other sites More sharing options...
keithlaban.co.uk Posted July 20 Share #25 Posted July 20 Out and about, always with a hood and a UV filter - I often shoot in dusty, windy environments. In the bag always with a hood and a UV filter and a lens cap. I look after my equipment and in return it looks after me. 1 Link to post Share on other sites More sharing options...
Etcherman Posted July 20 Share #26 Posted July 20 I use a Leica protective filter in front of the lens. The hood is always on and the Leica lens cap is attached when I’m not using my Q2. Link to post Share on other sites More sharing options...
jaapv Posted July 20 Share #27 Posted July 20 Advertisement (gone after registration) I never use a lens cap on any camera - filter and hood are ample protection. Lens caps? I have lost ones strewn all over the landscape worldwide, contributing to microplastic pollution. Link to post Share on other sites More sharing options...
NightPix Posted July 20 Author Share #28 Posted July 20 Thanks for all the comments. Consensus seems to be a protective filter and hood, with the lens cap relegated to use in the bag or when stored. This is good to hear and should save me a bit of money in the future because, like @jaapv I too have left many a lens cap behind in my travels. (Also a few filters as well.) Link to post Share on other sites More sharing options...
kenf Posted July 20 Share #29 Posted July 20 Factory hood at all times, and a quality filter 99% of the time (only removed if the light is difficult, it’s only happened a few times.) The factory cap is safe in the box, I use one of the cheap Chinese leather caps over the factory hood in the bag when not actively out shooting. Link to post Share on other sites More sharing options...
Rick in CO Posted July 22 Share #30 Posted July 22 On 7/20/2025 at 7:54 AM, jaapv said: I never use a lens cap on any camera - filter and hood are ample protection. Lens caps? I have lost ones strewn all over the landscape worldwide, contributing to microplastic pollution. That's why I always get a less expensive cap and keep the Leica caps in the box at home. Lost caps always seem to happen on a bridge over a rushing river. 1 Link to post Share on other sites More sharing options...
Alexander108 Posted July 22 Share #31 Posted July 22 As I work with filters (ND / CPL) quite often, I bought the PolarPro - MagFlip Hood that comes with an aluminum lens cap. The lens cap is only mounted when transporting the camera. The hood provides substantial protection. At the same time I can just flip the hood and have access to the filters. Use a magnetic system (Urth) where the magnetic ring is always mounted. 1 Link to post Share on other sites More sharing options...
Gateway77 Posted July 22 Share #32 Posted July 22 Personally I use the Match Technical lens cap. No filter. Attached so impossible to lose. Rubber so protective to a degree. Works well. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! 1 Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/423074-do-you-use-a-lens-cap-on-your-q3-or-q3-43/?do=findComment&comment=5837087'>More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now