Jump to content

Recommended Posts

Advertisement (gone after registration)

Hello everyone, I am a happy owner of the Leica SL (TYP-601) and I am thinking of switching to the Leica SL2, hoping to find less noise in the files and an even better viewfinder. I have read specific discussions on this forum on this topic and this is not what interests me in this topic of mine, in fact, I would simply like to have a confirmation: is there also the possibility on the SL2, like on the SL, to see in real time the effects of the adjustments of time/diaphragm/ISO on the shot, in M mode? Thanks everyone!

Link to post
Share on other sites

30 minutes ago, hoolyproductions said:

Sì, è stato aggiunto in un aggiornamento del firmware. C'è un'opzione di menu per l'anteprima DoF e puoi assegnarla a un pulsante.

Just to be sure, one more confirmation: that is, as I turn the shutter speed dial, with manual ISO and M mode, I see the effects on the final photo, before taking it, in real time, as I turn the dial. With the SL it's like this..... With the SL2 is it necessary to assign this function to a button?? Sorry for the additional question.

Edited by Shepherdphotographer
Link to post
Share on other sites

I used it a few times when taking landscapes but don't have a lot of experience. 

I just checked my SL2-S and it seems you need to assign a button (could not see any other way to activate it). I used to reprogram one of the buttons when I wanted to use it. Once you activate it it only stays active for one shot (I guess similar to a DoF lever on an old SLR camera 😄)

And text below from : https://www.reddotforum.com/content/2022/05/major-firmware-updates-for-sl2-and-sl2-s/

Exposure and depth of field preview

This function simulates the effects of the current aperture and shutter speed settings. It allows the user to assess the exposure and depth of field of the image before shooting. The function is similar to that of the depth-of-field preview button. To use, assign Exposure/DOF Simulation to a function button. Pressing the button then cycles through the three display options: No preview, Preview with current aperture (DOF) and Preview with current aperture value (DOF) and Shutter speed (Exposure Preview).

When the exposure information is visible, a green eye symbol next to the values for aperture and shutter speed will display the active depth of field/exposure preview. The relevant unit of measure icon will additionally appear in green.

 

  • Like 1
Link to post
Share on other sites

3 minutes ago, hoolyproductions said:

L'ho usato un paio di volte per scattare foto di paesaggi, ma non ho molta esperienza. 

Ho appena controllato la mia SL2-S e sembra che tu debba assegnare un pulsante (non ho trovato nessun altro modo per attivarlo). Ero solito riprogrammare uno dei pulsanti quando volevo usarlo. Una volta attivato, rimane attivo solo per uno scatto (immagino simile a una leva DoF su una vecchia reflex  😄 )

E il testo qui sotto da:  https://www.reddotforum.com/content/2022/05/major-firmware-updates-for-sl2-and-sl2-s/

 

Anteprima dell'esposizione e della profondità di campo

Questa funzione simula gli effetti delle impostazioni correnti di apertura e velocità dell'otturatore. Consente all'utente di valutare l'esposizione e la profondità di campo dell'immagine prima di scattare. La funzione è simile a quella del pulsante di anteprima della profondità di campo. Per utilizzarla, assegnare Exposure/DOF Simulation a un pulsante funzione. Premendo il pulsante, si passa quindi attraverso le tre opzioni di visualizzazione: Nessuna anteprima, Anteprima con apertura corrente (DOF) e Anteprima con valore di apertura corrente (DOF) e velocità dell'otturatore (Exposure Preview).   

Quando le informazioni sull'esposizione sono visibili, un simbolo di occhio verde accanto ai valori di apertura e velocità dell'otturatore visualizzerà l'anteprima attiva della profondità di campo/esposizione. L'icona dell'unità di misura pertinente apparirà inoltre in verde.

 

Thank you, you have been really precious: I find this thing much more uncomfortable and less practical than the direct one of the SL......

Link to post
Share on other sites

I realised you may have simply meant how the exposure preview works, not the depth of field preview. I'm not sure if that is same/different than SL. On my SL2-S when in manual mode I do indeed see the exposure change in real time, although I think it does brighten the image a little. There are a couple of different settings for exposure preview though - the manual covers this.

Link to post
Share on other sites

Advertisement (gone after registration)

4 minutes ago, hoolyproductions said:

Ho capito che potresti semplicemente aver inteso come funziona l'anteprima dell'esposizione, non l'anteprima della profondità di campo. Non sono sicuro se sia uguale/diverso da SL. Sulla mia SL2-S quando sono in modalità manuale vedo effettivamente il cambiamento dell'esposizione in tempo reale, anche se penso che renda l'immagine un po' più luminosa. Ci sono un paio di impostazioni diverse per l'anteprima dell'esposizione, tuttavia il manuale ne parla.

I was interested in knowing if: shooting in M mode, manual ISO, framing, WHILE I'M COMPOSING, BEFORE SHOOTING and turning the top dial, which changes the shutter speed, setting a slower speed, for example, I see the brighter image directly in real time and if, instead, for example, turning the top dial in such a way as to set a faster speed, I see the darker image, since in any case the aperture setting and the ISO are manual, so there is no automatic adjustment by the camera.

Link to post
Share on other sites

4 minuti fa, jaapv ha detto:

È la stessa cosa. Tuttavia, se stai cercando capacità di scarsa illuminazione, la SL2S è una scelta migliore. 

That is, are they identical? Do I see the preview shot the same way as it will appear in the end?

Edited by Shepherdphotographer
Link to post
Share on other sites

Just checked - when I set my SL2S to manual, the LCD (and EVF) darken as I push the camera into underexposure and lighten as I push it towards overexposure. I might add, however, that the way the LCD looks is a poor measure of correct exposure in general. It may match the end result  (or not) depending on the LCD brightness, the ambient light when you look on the LCD, etc. The Histogram is far more precise.

The point I made was, however, that due to the larger pixel size of the SL2S, the noise performance an dynamic range of the camera will be much better than the SL2. 

https://fstoppers.com/reviews/leica-sl2-s-long-term-review-incredible-workhorse-produces-stunning-images-even-667262

I agree fully with this review, except for the bit where he does not understand the way flash protocols work, skip that part, it is uninformed speculation. 

  • Like 1
Link to post
Share on other sites

4 minutes ago, jaapv said:

Ho appena controllato: quando imposto la mia SL2S su manuale, l'LCD (e l'EVF) si scuriscono quando spingo la fotocamera in sottoesposizione e si schiariscono quando la spingo verso la sovraesposizione. Potrei aggiungere, tuttavia, che l'aspetto dell'LCD è una misura scadente della corretta esposizione in generale. Potrebbe corrispondere al risultato finale (o meno) a seconda della luminosità dell'LCD, della luce ambientale quando si guarda l'LCD, ecc. L'istogramma è molto più preciso.

Tuttavia, il punto che ho sollevato è che, grazie alle maggiori dimensioni dei pixel della SL2S, le prestazioni in termini di rumore e la gamma dinamica della fotocamera saranno molto migliori rispetto alla SL2. 

A heartfelt thanks to hooly productions and Jaapv, in particular: you have always intervened in all my requests for help, explanations and clarifications since I purchased the Leica SL (TYP-601) and you have always been thorough, very kind and courteous. I will evaluate, thanks to you, also the SL2-S, at this point, because the noise is very important to me and it is the only almost negative point of my SL (TYP-601). A heartfelt thanks

  • Like 1
Link to post
Share on other sites

21 minutes ago, jaapv said:

Ho appena controllato: quando imposto la mia SL2S su manuale, l'LCD (e l'EVF) si scuriscono quando spingo la fotocamera in sottoesposizione e si schiariscono quando la spingo verso la sovraesposizione. Potrei aggiungere, tuttavia, che l'aspetto dell'LCD è una misura scadente della corretta esposizione in generale. Potrebbe corrispondere al risultato finale (o meno) a seconda della luminosità dell'LCD, della luce ambientale quando si guarda l'LCD, ecc. L'istogramma è molto più preciso.

Tuttavia, il punto che ho sollevato è che, grazie alle maggiori dimensioni dei pixel della SL2S, le prestazioni in termini di rumore e la gamma dinamica della fotocamera saranno molto migliori rispetto alla SL2. 

https://fstoppers.com/reviews/leica-sl2-s-long-term-review-incredible-workhorse-produces-stunning-images-even-667262

Sono pienamente d'accordo con questa recensione, eccetto per la parte in cui non capisce il modo in cui funzionano i protocolli flash. Saltate quella parte, sono solo speculazioni poco informate. 

At what ISOs and above do you notice a difference in noise between the SL2 and the SL2-S?

Link to post
Share on other sites

I don't have an SL2, but below you will see shots from the SL2S. Imported at ACR standard settings, only resized in PS , at 25.000. 50.000 and 100.000 ISO and as last the 100.000 run through Topaz Denoise AI with the basic "Auto" settings. As you can see the 100.000 Topaz image is very usable. 

And these were quick snaps whilst walking the dogs just now - if you pay extra attention to exposure and postprocessing, the results will be even better.

 

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

Link to post
Share on other sites

  • 2 weeks later...
On 16/11/2024 at 17:29, jaapv said:

È la stessa cosa. Tuttavia, se stai cercando capacità di scarsa illuminazione, la SL2S è una scelta migliore. 

I have a question for you after some time on this topic: UP TO 400 ISO, is there, INSTEAD, a noticeable difference in noise between the SL2 and the SL2-S, both IN LOW LIGHT AND IN BRIGHT LIGHT? Thanks again!

Link to post
Share on other sites

If you expose properly in low light and don’t get sidetracked by specular highlights I don’t think that you would see a relevant difference.  Both are basically low ISO shots. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...