Help needed with 35mm Lux Asph front element wobble

[yanidel]

Advertisement (gone after registration)

Hello,  

Last week, I suddenly started to have problems focusing my 35mm Lux Asph (pre-FLE), especially wide open. At first I thought the rangefinder was off but after checking a few lenses, I realized it was my Lux, which I have owned for 15 years.  The front element slightly wobbles when moving it. You can see it in the following video :

 

Since I live in Argentina and there is no Leica dealer here (and shipping abroad is not easy due to customs policies) , is there an easy fix to that ?   Would a normal camera technician be able to fix it?  Or does it need to go to Leica service anyways?
The lens still works from F2.8 to F16 and if I apply some pressure on the front element after focusing, it also works at F1.4 but it is not ideal in action situations.

Thanks in advance for suggestions.  

 

[jakontil]

A normal tech who has experience with leica would do the job

or can you reach out chile? A guy named enzo patagonean, a leica specialist 

 

Good luck senor yanidel, love your photos

Edited July 25, 2024 by jakontil

[yanidel]

6 minutes ago, jakontil said:

A normal tech who has experience with leica would do the job

or can you reach out chile? A guy named enzo patagonean, a leica specialist 

 

Good luck senor yanidel, love your photos

Yes I could probably get it to Chile through a friend that regularly travels there. Unless I find someone closer, I'll contact with Enzo. thanks a lot !!! 

[yanidel]

Found a solution in Buenos Aires with a specialized service man.  Thanks again for help.  

[FrozenInTime]

It looks like the whole element group is moving.

I fixed the same on mine through the rear mount, by simply tightening up the recessed ring that has two key slots.

[yanidel]

Yes, the service man told me it was an easy job.  I'll take the opportunity to have it cleaned and tightened up    I prefer not to touch it myself, very clumsy with my hands.