antonioxrosa Posted July 7, 2023 Share #1 Posted July 7, 2023 Advertisement (gone after registration) Hi, Still learning and enjoying my Leica M11 Monochrome. I understood it is possible to charge the battery in camera with a power bank, but I am a bit confused. In the manual is says to switch off the camera but that way the charging process doesn't initiate. I have to switch on the camera than wait for the green light to start blinking and than if I switch off the camera the charging process works. Is this normal? Do you also have this experience? Do I need a special power bank? I use a Anker 5V. Thanks Link to post Share on other sites More sharing options...
Advertisement Posted July 7, 2023 Posted July 7, 2023 Hi antonioxrosa, Take a look here Charging M11 with a power bank. I'm sure you'll find what you were looking for!
elmars Posted July 7, 2023 Share #2 Posted July 7, 2023 Yes, this is normal - a bug from the beginning of the M11 that Leica never eliminated. And no, no specific power bank is needed. 1 1 Link to post Share on other sites More sharing options...
jakontil Posted July 8, 2023 Share #3 Posted July 8, 2023 8 hours ago, elmars said: Yes, this is normal - a bug from the beginning of the M11 that Leica never eliminated. And no, no specific power bank is needed. Hi elmars, i found that a more powerful say above 5v 2A, will always initiate the charging automatically Hence i always use my ipad charger otherwise, i have to turn on to initiate, but i might be wrong this could be a bug which i believe easily sorted out in firmware 1 Link to post Share on other sites More sharing options...
elmars Posted July 8, 2023 Share #4 Posted July 8, 2023 vor 1 Stunde schrieb jakontil: this could be a bug which i believe easily sorted out in firmware I guess so too, because in the Q3 it is just plug and charge, no matter if the camera is on or off. But Leica does nothing at the M11 though many users are irritated. 1 Link to post Share on other sites More sharing options...
marchyman Posted July 8, 2023 Share #5 Posted July 8, 2023 12 hours ago, elmars said: because in the Q3 it is just plug and charge Always? I ask because my M11 sometimes is sometimes just plug and charge. Other times seems to need power to be toggled on and off to kick things off. I'm using the same charger in both cases, so the conjecture of a needed voltage/current doesn't fit my case. FWIW I use the same USB-C power supply and cable used to charge my iPad. This is mostly a non-issue for me. I plug the camera in when necessary. If I don't see the charge light I turn the camera on. The charge light comes on and I turn the camera off. Takes maybe 15 seconds. Link to post Share on other sites More sharing options...
elmars Posted July 9, 2023 Share #6 Posted July 9, 2023 It's not a big problem. But you expect the battery to charge when you plug the cable in - whether the camera is on or off. It's like that with every other device I know (including the Q3). That's why with the M11, many people are irritated and wonder if their camera is broken. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now