arjo van der Graaff Posted May 17, 2023 Share #1  Posted May 17, 2023 Advertisement (gone after registration) Dear members More than 40 years working as a photographer / filmer and earn our living with that amazing job. I skipped all those years the rangefinder Leica because of the truly amazing Hasselblad analog system. Working with Linhof technica ,Sinar , fuji Gfx 680 , Nikon f3 Hp to the digital world in 2002 with Hasselblad with the square 4x4 sensor. Than the Kodak 760(6 mp)  and than best ccd sensor camera the Phase one 45 P and a unbelievable amount of Nikon Canon Olympus models for Photo and film. The last 3 years with The Hasselblad X1 d 2 and the  till now the Hasselblad X2D. And as a huge mistake the Nikon Z9 ( what a waste of money ) Bad autofocus (yes) really to much grain at higher iso , small dynamic range. The stack cmos sensor ... they bring it to fast. Till 3 weeks ago i get my hands on a Leica Sl2 s never think about Leica in all those years . It is a really a wonder. Colors , lenses  the feeling the look yes it is it! Also the very pro film cine settings. But one thing this week happened with 2 weddings. The user profile (saved) switch from my settings to default with switching battery of sometimes spontaneously. That's really not a joke. I try everything but that's the current situation. Have other users also that problem , I read an early post but that gave no solution. Kind regards Arjo www.fotograaff.nl Link to post Share on other sites More sharing options...
Advertisement Posted May 17, 2023 Posted May 17, 2023 Hi arjo van der Graaff, Take a look here Leica Sl-s user profile problem. I'm sure you'll find what you were looking for!
Virob Posted May 17, 2023 Share #2 Â Posted May 17, 2023 Have you tried resaving your profile? That might help. Â Link to post Share on other sites More sharing options...
jaapv Posted May 17, 2023 Share #3 Â Posted May 17, 2023 As a backup save the user profiles to the SD card Then you can reload them instantly Link to post Share on other sites More sharing options...
LEGEND Posted May 17, 2023 Share #4  Posted May 17, 2023 8 hours ago, arjo van der Graaff said: Dear members More than 40 years working as a photographer / filmer and earn our living with that amazing job. I skipped all those years the rangefinder Leica because of the truly amazing Hasselblad analog system. Working with Linhof technica ,Sinar , fuji Gfx 680 , Nikon f3 Hp to the digital world in 2002 with Hasselblad with the square 4x4 sensor. Than the Kodak 760(6 mp)  and than best ccd sensor camera the Phase one 45 P and a unbelievable amount of Nikon Canon Olympus models for Photo and film. The last 3 years with The Hasselblad X1 d 2 and the  till now the Hasselblad X2D. And as a huge mistake the Nikon Z9 ( what a waste of money ) Bad autofocus (yes) really to much grain at higher iso , small dynamic range. The stack cmos sensor ... they bring it to fast. Till 3 weeks ago i get my hands on a Leica Sl2 s never think about Leica in all those years . It is a really a wonder. Colors , lenses  the feeling the look yes it is it! Also the very pro film cine settings. But one thing this week happened with 2 weddings. The user profile (saved) switch from my settings to default with switching battery of sometimes spontaneously. That's really not a joke. I try everything but that's the current situation. Have other users also that problem , I read an early post but that gave no solution. Kind regards Arjo www.fotograaff.nl That happened to me also few times but then I figure out what must be the cause of this problem... By going in the status menu I must accidentally pressed  the user profiles and moved the slider to the left not even noticing it and that made a change from my User profile 1 to the default User profile of the camera... At least I think that was the cause in my case... Otherwise my SL2-S work perfectly with almost no problems... Nikola  Link to post Share on other sites More sharing options...
arjo van der Graaff Posted May 25, 2023 Author Share #5  Posted May 25, 2023 Dear users  i try all this solutions . the only possible way is ont use user profile and customized the buttons only  kind regards arjo Link to post Share on other sites More sharing options...
arjo van der Graaff Posted May 25, 2023 Author Share #6  Posted May 25, 2023 And saving to your card helps not , because only a couple of minutes its sits on your profile when you reload , but change to film and back the profile is not active any more. Its a memorizing problem of the leica i try really all this solutions  arjo Link to post Share on other sites More sharing options...
Photoworks Posted May 28, 2023 Share #7 Â Posted May 28, 2023 Advertisement (gone after registration) Just try not to pull the battery. Everything changes if you do that. Turn camera off first and then change battery and you last setting are saved. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now