Jump to content

Recommended Posts

I too have the Arte Di Mano with the battery and card access. The SD card is harder to take out than without a case at all, the ADM case adds about 1/4" to the bottom. The Lim's case was deeper I thought. Does the MegaGear case "deepen" the hole, so to speak, for the SD access door also?

You know, the best bet might be just the Leica handgrip. I thought it would be a pain in the butt to take it off all the time for the card and battery access, but I found that I didn't mind it so much. It's easy to come on and off. And the battery lasts much longer than the original Q, so I only ended up taking the handgrip off every 2 or 3 days after heavier than average use.

Link to post
Share on other sites

16 hours ago, higa said:

I too have the Arte Di Mano with the battery and card access. The SD card is harder to take out than without a case at all, the ADM case adds about 1/4" to the bottom. The Lim's case was deeper I thought. Does the MegaGear case "deepen" the hole, so to speak, for the SD access door also?

You know, the best bet might be just the Leica handgrip. I thought it would be a pain in the butt to take it off all the time for the card and battery access, but I found that I didn't mind it so much. It's easy to come on and off. And the battery lasts much longer than the original Q, so I only ended up taking the handgrip off every 2 or 3 days after heavier than average use.

The Mega Gear majorly deepens the hole to where it is an exercise in dexterity to get the card out.  

Will look into the options above.  Thanks to all 

Link to post
Share on other sites

I also purchased one of the Artisan&Artist half cases with cutout/flaps to access the battery and memory card.  I originally purchased the Leica case, but returned it as I found it to be heavier that the A&A case.  I would think most cases with the cutout on the bottom can be a a little difficult to snag the memory card.  With my Sony card I use the tip of my fingernail, but could also use a key or small knife blade to catch the edge of the card.  It is not a big deal.

Link to post
Share on other sites

Not my favourite, but it functions - the hand grip it's ok , do like the metal bottom that is arca-swiss compatible, and despite not being fully enclosed at the bottom, the access to card and battery it's easy enough while remaining far enough away from most debris - yes, a LIM's case

sure the leather does not feel refined neither has the natural scent, but I will be placing my Angelo Pelle case and strap for sale - truly don't need more the the cheap case is providing

Edited by nwphil
Link to post
Share on other sites

On 10/21/2021 at 11:29 AM, Thanny said:

Lim's Design LC-Q2DBK Metal Grip Genuine Leather Camera Half Case for Leica Q2. Access to both the battery and memory card without removing the half case. 

...and Arca_Swiss compatible dovetail, which allows you to mount it on a tripod without having to add a plate

  • Like 1
Link to post
Share on other sites

9 hours ago, Viv said:

Putting the Q2 in a case is like having a bath while wearing socks.

 

😂I take it to dusty places, and lately in some trips were bathing daily it's not an option - the case got a bit filthy/dusty, but in town, sure I do like it naked too

ps: does wearing sandals  while soaking in a natural hot spring count?

Edited by nwphil
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...