Jump to content

Recommended Posts

I find "good" Bokeh hard to define -  but I have no complaints. Note  that due to the sensor format and limited aperture you will have to get in close to get a shallow DOF.

Link to post
Share on other sites

In the absence of reports of poor bokeh from forum members, I would assume every user is happy with the results from the standard zoom. In my experience, the results are very good indeed. Remember, the starting aperture is f/3.5; so the background is never wildly unsharp, just sufficient to provide visual isolation.

Link to post
Share on other sites

I find that when doing my automotive shots with the 18-56mm it's a fine line between getting some bokeh and enough depth of field to get the entire car in focus.  Typically I have to be about 8 -10 feet away from the car and at f/4 to f/5.6 the car will be separated from the background with a moderate amount of blur.  My main objective is to get the car to pop from the background and I can usually accomplish that.  

With a smaller subject the closer you can get the better the bokeh will be, obviously.  I wouldn't say the 18-56mm is a bokeh monster, but for the most part it's pretty good and enough to get that separation.  

  • Like 1
Link to post
Share on other sites

It is a surprisingly good lens - at least, it always surprises me in good way - but not the lens I would choose for shallow depth of field and good bokeh effects.  There is nothing wrong with the bokeh, it's just hard to get a shallow depth of field without being very close to the subject.  I would use the TL23 instead (I have both) although in all other respects the zoom matches it easily.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...