albertospa Posted December 15, 2020 Share #1 Posted December 15, 2020 Advertisement (gone after registration) I have a question about the M10's focus peaking. I cannot adjust the focus peaking sensitivity. I can adjust the color and magnification, but the sensitivity is too high and peaking appears even in areas that are not perfectly focused. I had Sony a7 and now I have a Nikon Z6 and I can adjust the peaking sensitivity to three positions. Is it also possible with the M10? Link to post Share on other sites More sharing options...
Advertisement Posted December 15, 2020 Posted December 15, 2020 Hi albertospa, Take a look here M10 Focus Peaking. I'm sure you'll find what you were looking for!
jdlaing Posted December 15, 2020 Share #2 Posted December 15, 2020 Page 166 in the manual. In short.........no. 1 Link to post Share on other sites More sharing options...
farnz Posted December 16, 2020 Share #3 Posted December 16, 2020 4 hours ago, albertospa said: I have a question about the M10's focus peaking. I cannot adjust the focus peaking sensitivity. I can adjust the color and magnification, but the sensitivity is too high and peaking appears even in areas that are not perfectly focused. I had Sony a7 and now I have a Nikon Z6 and I can adjust the peaking sensitivity to three positions. Is it also possible with the M10? Hi Alberto, You might be using too small an aperture producing a deep depth of field where a lot of things in the scene will naturally be in focus and the camera is struggling to tell what you're trying to focus on. If you use a wide aperture (say, f/2, f/1.4, f/0.95) then you should find that only what you're focussing on shows the peaking. Pete. 1 Link to post Share on other sites More sharing options...
albertospa Posted December 16, 2020 Author Share #4 Posted December 16, 2020 10 hours ago, farnz said: Hi Alberto, You might be using too small an aperture producing a deep depth of field where a lot of things in the scene will naturally be in focus and the camera is struggling to tell what you're trying to focus on. If you use a wide aperture (say, f/2, f/1.4, f/0.95) then you should find that only what you're focussing on shows the peaking. Pete. This is a far too obvious observation. Unfortunately, the focus peaking of the M10 is unreliable even at 1.4 as Steven rightly writes. I can't believe Leica has accomplished all of this. Hope that can be fixed with new firmware. Link to post Share on other sites More sharing options...
Matlock Posted December 16, 2020 Share #5 Posted December 16, 2020 11 minutes ago, Steven said: This is one more reason why the M had the potential to be my favorite camera but instead it’s my least used camera. Lately I’ve even considered to sell it and trade it against some mew lenses. Perhaps you are missing the point that the M10 (and other M cameras) are primarily Rangefinder cameras. If you decide that an EVF is what you really need then forget the M series. 1 Link to post Share on other sites More sharing options...
albertospa Posted December 16, 2020 Author Share #6 Posted December 16, 2020 36 minutes ago, Matlock said: Perhaps you are missing the point that the M10 (and other M cameras) are primarily Rangefinder cameras. If you decide that an EVF is what you really need then forget the M series. Of course the M10 is a rangefinder camera! But adding a feature like focus peaking adjustment would be a really big help, in some cases, that wouldn't affect the rangefinder function. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now