garyj12 Posted December 10, 2020 Share #1 Posted December 10, 2020 Advertisement (gone after registration) I'm really hoping someone can help with a problem I have with an M7. I've had the camera for a couple of years now and haven't experienced any issues to date apart from occasional film speed reader issues (I now always set ISO manually). However on my last roll of film (Tri-x) I took some grab shots with the camera pointed upwards to the sky. The cameras was on auto and likely set at f8. I would imagine the 1000th shutter speed would have been exceeded. I've attached a flat scan of one of the negatives. On the extreme right and left and side there are vertical dark bands and I can't figure out why. There is a similar problem on the two other sky shots taken on the same roll. All other frames seem fine. There is another lighter band a little way in from the left but that is a known issue with my scanner due to a problem with stepper motor I believe. Welcome, dear visitor! As registered member you'd see an image here… Simply register for free here – We are always happy to welcome new members! Link to post Share on other sites Simply register for free here – We are always happy to welcome new members! ' data-webShareUrl='https://www.l-camera-forum.com/topic/315948-dark-banding-on-sky-shots-taken-with-a-leica-m7/?do=findComment&comment=4095676'>More sharing options...
Advertisement Posted December 10, 2020 Posted December 10, 2020 Hi garyj12, Take a look here Dark banding on sky shots taken with a leica M7. I'm sure you'll find what you were looking for!
jaapv Posted December 10, 2020 Share #2 Posted December 10, 2020 Looks like a shutter problem to me - send it in for a CLA. Link to post Share on other sites More sharing options...
garyj12 Posted December 10, 2020 Author Share #3 Posted December 10, 2020 (edited) Ok, thanks, looks like I'll have to bite the bullet and get a CLA Edited December 10, 2020 by garyj12 typo Link to post Share on other sites More sharing options...
RayD28 Posted December 10, 2020 Share #4 Posted December 10, 2020 Agree with jaapv. I have an M3 that did the same thing only I had light banding instead of dark. Happened with fast shutter speeds. CLA took care of it. Link to post Share on other sites More sharing options...
garyj12 Posted December 10, 2020 Author Share #5 Posted December 10, 2020 Thanks for sharing your experience of the M3, I'll have to get this shipped off for a CLA, I'm going to miss it though! Link to post Share on other sites More sharing options...
Ko.Fe. Posted December 10, 2020 Share #6 Posted December 10, 2020 If you will send it, I highly recommend photo of the entire negative as description of the problem. Including sprockets. Not its cropped implementation via scanner. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now