Jump to content

Recommended Posts

I can't seem to find any samples, anyone tried using the Q for this, also how do i activate the 2 min exposure I cant figure it out.. I'll check again when I get home maybe I just overlooked it. thanks

It's quite simple: set the time dial to 1+ and than turn the exposure compensation dial clockwise to 2 minutes. That's it.

 

Be sure that the lastest firmware version is installed on your Q

Edited by Tmx
Link to post
Share on other sites

I still think film is better for star pictures.

 

Digital star trails always look "lumpy and disjointed"

 

Set and forget with one frame using film, and the right lens.

 

Good luck, and enjoy the night skies with binoculars and a star chart is best of all.

 

...

Link to post
Share on other sites

  • 2 weeks later...

Advertisement (gone after registration)

So, I am used to shoot stars with a reflex and, despite I love my Q, I have to say I find it limited for this kind of photography.

At high ISO, even with firmware 2.0, the exposure lenght is limited to few seconds and this doesn't help.

Also, if you want to create start trails you have to deal with the noise reduction frame between every shot of the time lapse sequence and it can be annoying.

 

But..

These holidays I took with me only the Q (exactly because I love it), and a couple of days ago I decided I wanted to take a picture of the milky way stretching the "long" exposure capabilities of my Q.

I believe the result is quite decent despite the limit of 8 seconds @1600 ISO  :). And I won't regret I didn't take also my reflex with me.

 

 

gallery_56782_5673_2665269.jpg

  • Like 14
  • Thanks 1
Link to post
Share on other sites

So, I am used to shoot stars with a reflex and, despite I love my Q, I have to say I find it limited for this kind of photography.

At high ISO, even with firmware 2.0, the exposure lenght is limited to few seconds and this doesn't help.

Also, if you want to create start trails you have to deal with the noise reduction frame between every shot of the time lapse sequence and it can be annoying.

 

But..

These holidays I took with me only the Q (exactly because I love it), and a couple of days ago I decided I wanted to take a picture of the milky way stretching the "long" exposure capabilities of my Q.

I believe the result is quite decent despite the limit of 8 seconds @1600 ISO  :). And I won't regret I didn't take also my reflex with me.

 

 

gallery_56782_5673_2665269.jpg

You can set exposure to 60 seconds or use T mode on the Q. How did you end up with 8 seconds as the limit?

Link to post
Share on other sites

You can set exposure to 60 seconds or use T mode on the Q. How did you end up with 8 seconds as the limit?

General rule: The higher the iso value the smaller the exposure time limitation

  • Like 1
Link to post
Share on other sites

You can set exposure to 60 seconds or use T mode on the Q. How did you end up with 8 seconds as the limit?

60 seconds or more can be set only at low ISO.

Raise the ISO setting and you'll see the camera limiting the exposure time (even in T mode). If I remember correctly it's 8 seconds @1600 ISO and 4 seconds @3200 and 6400.

Link to post
Share on other sites

60 seconds or more can be set only at low ISO.

Raise the ISO setting and you'll see the camera limiting the exposure time (even in T mode). If I remember correctly it's 8 seconds @1600 ISO and 4 seconds @3200 and 6400.

 

Aha, I stand corrected!

  • Like 1
Link to post
Share on other sites

Aha, I stand corrected!

I have to admit I didn't know it either. When I read the new firmware was extending long exposure time I assumed it was true for any ISO. I realized the limit was still there only when I was planning that shot... :)

Edited by NicoTheStan
Link to post
Share on other sites

So, I am used to shoot stars with a reflex and, despite I love my Q, I have to say I find it limited for this kind of photography.

At high ISO, even with firmware 2.0, the exposure lenght is limited to few seconds and this doesn't help.

Also, if you want to create start trails you have to deal with the noise reduction frame between every shot of the time lapse sequence and it can be annoying.

 

But..

These holidays I took with me only the Q (exactly because I love it), and a couple of days ago I decided I wanted to take a picture of the milky way stretching the "long" exposure capabilities of my Q.

I believe the result is quite decent despite the limit of 8 seconds @1600 ISO :). And I won't regret I didn't take also my reflex with me.

 

 

gallery_56782_5673_2665269.jpg

Absolutely beautiful pic. Congrats.

Link to post
Share on other sites

  • 1 year later...
On 8/23/2017 at 6:11 PM, NicoTheStan said:

So, I am used to shoot stars with a reflex and, despite I love my Q, I have to say I find it limited for this kind of photography.

At high ISO, even with firmware 2.0, the exposure lenght is limited to few seconds and this doesn't help.

Also, if you want to create start trails you have to deal with the noise reduction frame between every shot of the time lapse sequence and it can be annoying.

 

But..

These holidays I took with me only the Q (exactly because I love it), and a couple of days ago I decided I wanted to take a picture of the milky way stretching the "long" exposure capabilities of my Q.

I believe the result is quite decent despite the limit of 8 seconds @1600 ISO  :). And I won't regret I didn't take also my reflex with me.

 

 

gallery_56782_5673_2665269.jpg

After 8 seconds at ISO 1600 the shutter if turned one more click reaches "T"  what do you do from "T"   ?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...