visoflex Posted July 7, 2015 Share #1 Posted July 7, 2015 Advertisement (gone after registration) One of the problems of being an old dinosaur is that technology rolls on and passes me by. To this end, although my only concession to modern technology is an M9-P, I'm still using my old 35/50/90 pre- ASPH Summicron lenses from my M6 days. Unfortunately, LR6 does not have these in its lens pre-sets. Is anyone else in this position? What is your work-around or are you just using the ASPH equivalent profiles? Many thanks Link to post Share on other sites More sharing options...
Advertisement Posted July 7, 2015 Posted July 7, 2015 Hi visoflex, Take a look here LR6 - Old Lens Profiles. I'm sure you'll find what you were looking for!
tobey bilek Posted July 12, 2015 Share #2 Posted July 12, 2015 I would make up my own profiles and save them as a preset. Set vignetting two stops down from full open otherwise it will correct for mechanical vignetting at all stops therefore overcorrecting at smaller stops. distortion may vary depending on distance. Therefore find a suitable subject(s) and make a manual correction. Save as preset with only these two corrections made. I recommend using a Whi Bal Card to set white balance. You can set each of the 4 profiles available to Sun, cloudy, tungsten, and flash depending on your requirements. Link to post Share on other sites More sharing options...
jrp Posted July 13, 2015 Share #3 Posted July 13, 2015 It would be good if Leica generated some of these old lens profiles. (Similarly for Zeiss, Voigtlander, etc.) After all, they offer Lightroom with the cameras. Rolling your own is possible, but not much fun. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.