angusyoung Posted September 16, 2014 Share #1 Posted September 16, 2014 Advertisement (gone after registration) Dear All, Very unfortunately, dropped my M9 to the floor.Lens is fine but looks like there is somthing wrong about CCD part. Is anyone knows about the CCD placing price?or service fees?please support any information. cheers Link to post Share on other sites More sharing options...
Advertisement Posted September 16, 2014 Posted September 16, 2014 Hi angusyoung, Take a look here m9 ccd replacing. I'm sure you'll find what you were looking for!
k_g_wolf ✝ Posted September 16, 2014 Share #2 Posted September 16, 2014 Welcome to the LEICA- forum. Would have been nice, could you have a better reason for your post #2. Since only LEICA will/ can work on your digital camera, you should contact the nearest LEICA-repair station. In case you can´t find one send your camera (recommended: DHL-wise) to Wetzlar. They will help you AFAP. Search for an insurance within the many you might have. Or one of your friends. Best GEORG Link to post Share on other sites More sharing options...
sblitz Posted September 16, 2014 Share #3 Posted September 16, 2014 About US$2500 maybe a break to $2000 at Leica USA in New Jersey. Or about 70 rolls of film including processing and scanning. Link to post Share on other sites More sharing options...
jaapv Posted September 16, 2014 Share #4 Posted September 16, 2014 What exactly is wrong ? Link to post Share on other sites More sharing options...
iaeaix Posted September 28, 2014 Share #5 Posted September 28, 2014 About US$2500 maybe a break to $2000 at Leica USA in New Jersey. Or about 70 rolls of film including processing and scanning. Wow, that's a lot $ considering the price of used M9 at the moment. Link to post Share on other sites More sharing options...
sblitz Posted September 29, 2014 Share #6 Posted September 29, 2014 true, but if you buy a used M9 you are getting a used sensor as well with no idea when it might have a problem, etc .... w/o warranty. Not sure I would do it again, however. Enjoying film so much more again and I can use that money and buy a T instead. Link to post Share on other sites More sharing options...
FlashGordonPhotography Posted September 29, 2014 Share #7 Posted September 29, 2014 Advertisement (gone after registration) Take it to Foto Riesel. Tell them you have no idea what happened but it's not working properly. Sometimes Leica is generous regarding replacement sensors but thelocal repair agent isn't if you admit fault. Gordon Link to post Share on other sites More sharing options...
erl Posted September 29, 2014 Share #8 Posted September 29, 2014 My current understanding is that camera Clinic (authorized Australian Leica Repairer) can replace sensors. Give them a call. If you need further contact details, PM me. Link to post Share on other sites More sharing options...
hoppyman Posted September 29, 2014 Share #9 Posted September 29, 2014 With a drop, unfortunately it is possible that there is other damage too of course. The sensor assembly is matched to the supporting circuit board as well (and so would be replaced together if needed). Damage from a heavy impact would likely be evident on disassembly. If Camera Clinic can't quote/perform the work they will send the camera on to Wetzlar for you. Alternatively you may deal directly with Customer Care at Wetzlar. I would be sitting down when I read the quote though, sorry Good luck! Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.