jimleicam3 Posted July 31, 2013 Share #1 Posted July 31, 2013 Advertisement (gone after registration) I seem to be having a sticky button issue on my X2. The small button tabs for the flash control and the timer, seem to stick off and on. Do I have to send it back to Leica? Anyone else having this problem? Thanks Link to post Share on other sites More sharing options...
Advertisement Posted July 31, 2013 Posted July 31, 2013 Hi jimleicam3, Take a look here Sticky Buttons on my X2. I'm sure you'll find what you were looking for!
symmetron Posted August 1, 2013 Share #2 Posted August 1, 2013 I had a similar issue on my X1, but the button at 6 o'clock was sticking (AF/MF). Eventually, I had to send it in eventually because when using the buttons in Menu mode, the Menu would just keep scrolling. Link to post Share on other sites More sharing options...
earleygallery Posted August 1, 2013 Share #3 Posted August 1, 2013 There is stuff you could try (like spray contact cleaner) which might work, but if you managed to damage the camera repair would be at your own cost, so I'd send it back, assuming it's under warranty? Link to post Share on other sites More sharing options...
nevheatley3 Posted November 23, 2016 Share #4 Posted November 23, 2016 I am having this same issue (https://drive.google.com/open?id=0B2jA2fqxIm5xNzFoNkpyNElNQmc), has anyone found a solution that does not involve sending it back to Leica for service? Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.