BABAROZA Posted July 23, 2006 Share #1 Posted July 23, 2006 Advertisement (gone after registration) Need Help In Order To Correct The Following Problem With My Equipmt. (dmr-r8) Using 1gb Sd Card,after Shooting 69 Pictures I Downloaded The Data To My Jobo Giga Vu Pro Which Was Successful But When I Reloaded The Card In The Card Slot The Camera Would Not Read, Tried A New Card Same Response Took The Original Card Loaded In The D2 Card Worked Fine Link to post Share on other sites More sharing options...
Advertisement Posted July 23, 2006 Posted July 23, 2006 Hi BABAROZA, Take a look here Dmr-r8. I'm sure you'll find what you were looking for!
mgcd Posted July 23, 2006 Share #2 Posted July 23, 2006 Which DMR firmware version are you using? Version 1.2 is not compatible with some devices and your Jobo may have re-written over some of the data. Link to post Share on other sites More sharing options...
BABAROZA Posted July 23, 2006 Author Share #3 Posted July 23, 2006 Which DMR firmware version are you using? Version 1.2 is not compatible with some devices and your Jobo may have re-written over some of the data. THE FIRMWARE IN USE, IS THE ORIGINAL VERSION 1.1 THANK YOU Link to post Share on other sites More sharing options...
mgcd Posted July 23, 2006 Share #4 Posted July 23, 2006 First, get off your "all caps" it's tantamount to yelling. Second, your problem may still be your Jobo over writing on your card. Link to post Share on other sites More sharing options...
BABAROZA Posted July 24, 2006 Author Share #5 Posted July 24, 2006 First, get off your "all caps" it's tantamount to yelling. Second, your problem may still be your Jobo over writing on your card. SORRY, I LIKE CAPS. HAVE ALREADY DOWNLOADED VERSION 1.1 AGAIN STILL NO CHANGE THANKS ANYWAY Link to post Share on other sites More sharing options...
ebwilson Posted July 24, 2006 Share #6 Posted July 24, 2006 SORRY, I LIKE CAPS. HAVE ALREADY DOWNLOADED VERSION 1.1 AGAINSTILL NO CHANGE THANKS ANYWAY I I always thought the all caps writing was for those of use who would otherwise not be able to read the screen. My eyes are 60, but they're a high mileage 60. Link to post Share on other sites More sharing options...
andybarton Posted July 24, 2006 Share #7 Posted July 24, 2006 Advertisement (gone after registration) The use of all caps is, as Conrad says, considered to be shouting in "netiquette" and is generally frowned upon. Reading text written in all caps is also extremely difficult, as we often read the shape of words rather than individual letters and letter combinations. This is impossible to do if all caps are used, which therefore makes text less legible. This is one of the reasons why books and magazines and newspapers and all published media don't use all caps. I wouldn't normally read a post in all caps for this reason. All browsers have the capability to increase font size on the page, should you have difficulty reading the standard size text. Link to post Share on other sites More sharing options...
phybron Posted July 24, 2006 Share #8 Posted July 24, 2006 SORRY, I LIKE CAPS. Congratulations. You're the first person I've ever put on my ignore list. Link to post Share on other sites More sharing options...
stuny Posted July 24, 2006 Share #9 Posted July 24, 2006 Baraboza - Andy is right regarding the readability of words in all upper case letters being considerably more difficult to read than standard use of upper and lower case. The first published studies I've read on that date to the late 1940s in the early version of today's Human Factrors Engineers, then just called (in the UK where the initial studies were run), Ergonomics. In short, regardless of how much you like all upper case the vast majority of your readers will dislike it for readability, "netiquet" or both. So if you want your messages read and understood, business and personal, I highly recommend going with convention and research results. Link to post Share on other sites More sharing options...
BABAROZA Posted July 24, 2006 Author Share #10 Posted July 24, 2006 Baraboza - Andy is right regarding the readability of words in all upper case letters being considerably more difficult to read than standard use of upper and lower case. The first published studies I've read on that date to the late 1940s in the early version of today's Human Factrors Engineers, then just called (in the UK where the initial studies were run), Ergonomics. In short, regardless of how much you like all upper case the vast majority of your readers will dislike it for readability, "netiquet" or both. So if you want your messages read and understood, business and personal, I highly recommend going with convention and research results. Now that you have all made your point about nothing.The problem is still there, so lets get some constructive feedback, please Link to post Share on other sites More sharing options...
bill Posted July 24, 2006 Share #11 Posted July 24, 2006 Now that you have all made your point about nothing.The problem is still there, so lets get some constructive feedback, please ...and you expect people to help with an attitude like that? How singular. Regards, Bill Link to post Share on other sites More sharing options...
BABAROZA Posted July 24, 2006 Author Share #12 Posted July 24, 2006 Congratulations. You're the first person I've ever put on my ignore list. THANK YOU, I hope that is a promise Link to post Share on other sites More sharing options...
BABAROZA Posted July 24, 2006 Author Share #13 Posted July 24, 2006 ...and you expect people to help with an attitude like that? How singular. Regards, Bill It is obvious,that they can't help so why bother to reply with the repeated mess. on caps waste of time Link to post Share on other sites More sharing options...
bill Posted July 24, 2006 Share #14 Posted July 24, 2006 Fantastic - our first troll of the new forum. Far be it from us to waste your time. I'm sure you can think of much more valuable and creative uses for it than we ever could. Bye. Bill Link to post Share on other sites More sharing options...
starwatcher Posted July 24, 2006 Share #15 Posted July 24, 2006 ok, Gents, calm down please. Hary, back to your problem... try to understand: you say you just read the card out in the Jobo, took it out and then placed in the DMR it doesn't work? Another forum member (who unfortunately does not speak english) also works with a Jobo (not sure with which one), could try to find out whether he has heard about this issue. best -Klaus Link to post Share on other sites More sharing options...
bill Posted July 24, 2006 Share #16 Posted July 24, 2006 Thank you Klaus. Regards, Bill Link to post Share on other sites More sharing options...
BABAROZA Posted July 24, 2006 Author Share #17 Posted July 24, 2006 ok, Gents, calm down please. Hary, back to your problem... try to understand: you say you just read the card out in the Jobo, took it out and then placed in the DMR it doesn't work? Another forum member (who unfortunately does not speak english) also works with a Jobo (not sure with which one), could try to find out whether he has heard about this issue. best -Klaus Thank you, the Jobo model that I have is the giga vue pro -60GB Link to post Share on other sites More sharing options...
mgcd Posted July 24, 2006 Share #18 Posted July 24, 2006 ok, Gents, calm down please. Hary, back to your problem... try to understand: you say you just read the card out in the Jobo, took it out and then placed in the DMR it doesn't work? Another forum member (who unfortunately does not speak english) also works with a Jobo (not sure with which one), could try to find out whether he has heard about this issue. best -Klaus Klaus - The DMR is not on the list of supported products for the Giga Vu Pro. Therefore, I believe the device is overwriting on the SD card in an attempt to read the data, thereby changing its structure. I'm only bothering to answer because you intervened on this thread. Link to post Share on other sites More sharing options...
starwatcher Posted July 24, 2006 Share #19 Posted July 24, 2006 Conrad, thanks for clarification with regard to the Jobo; sometime ago I was also thinking about buying one but I dropped the idea for some other reason. As I am not a native english speaker I need your help in understanding your last sentence. I mean, I can translate it but I don't get into context... best - Klaus Link to post Share on other sites More sharing options...
mgcd Posted July 24, 2006 Share #20 Posted July 24, 2006 Klaus - I sent you a PM. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.