semi-ambivalent Posted April 8, 2013 Share #1 Posted April 8, 2013 Advertisement (gone after registration) I have an M3 which, at the lens's infinity stop, leaves the RF patch image a bit to the right of the VF image. (The vertical is off too but only by a very tiny amount. I'll live with it.) I've got good instructions on adjusting this but need a GOOD right angle screwdriver or such tool. Don't care to grind something down. Can anybody direct me to a supplier for a proper tool? Leica itself maybe? Also interested in any special tool(s) needed to adjust the 1 meter adjustment cam screw. Thanks, s-a Link to post Share on other sites More sharing options...
Advertisement Posted April 8, 2013 Posted April 8, 2013 Hi semi-ambivalent, Take a look here Rangerfinder adjustment tool source. I'm sure you'll find what you were looking for!
semi-ambivalent Posted April 9, 2013 Author Share #2 Posted April 9, 2013 Well, you can stop the presses. A narrow (3-4mm), thin, 100mm long screwdriver I use to adjust my bike's derailleurs gets to that screw just fine, has more than enough bite and torque to turn the slot and doesn't chew anything up. Apologies for the noise. s-a Link to post Share on other sites More sharing options...
steveclem Posted April 9, 2013 Share #3 Posted April 9, 2013 Always useful to know. Link to post Share on other sites More sharing options...
tobey bilek Posted April 22, 2013 Share #4 Posted April 22, 2013 Micro tools .com Link to post Share on other sites More sharing options...
gyoung Posted April 22, 2013 Share #5 Posted April 22, 2013 You only need special tools for the later ones, although I have done my m6 with a 'reshaped' normal screwdriver. Gerry Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.