Jump to content

Is a film that has passed its ...


Gibbo

Recommended Posts

Advertisement (gone after registration)

I'd "rob" one of the rolls (i.e., shoot about 6-10 test frames, rewind, cut off the first 30% of the roll (in the darkroom, obviously ;) ) to process, and save the remaining film in the cassette as a "20-exposure roll."

 

Most likely defect of aging would be base fog - overall darkening or graying of the unexposed areas due to cosmic rays or other penetrating radiation over time.

 

BTW if this is actually HP4 (and not HP5 or FP4) - it must be WELL past the expiration limit, since HP4 was discontinued in 1976. However it is probably still usable.

 

Photo Utopia: Found Film: ILFORD HP4

Link to post
Share on other sites

Hi

 

If you have a lot of film you can use an anti fog agent in the dev - google.

 

If it is going to be foggy it will slow the effective speed try 2/3 of a stop slower.

 

Even if it is foggy it wont necessarily show on a scan or print, apart from reducing shadow (effective) density, hence the 2/3 of a stop.

 

Noel

Link to post
Share on other sites

bracket the exposures on the 12 frame test to determine effective speed. It has probably lost speed and contrast and picked up some base fog.

 

Compensate as instructed above. You will never get it to work as new in any case.

 

If the film was frozen, you would have a much better chance.

Link to post
Share on other sites

Would it be a very different answer if it was colour film?

 

I don't know about color film in general, but for Kodachromes (no longer a question) color shifts, loss of contrast and base fog would be expected even for frozen film, and slower speed film would have a much better chance of recording a usable image than fast film. I wouldn't try color film ten years past expiration that had been stored at room temperature.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...